How To Install Vinyl Siding On A Shed
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- amzn.to/2tyqcIP Framing nailer for your shed it will pay off fast
amzn.to/2sfscBZ Swanson Speed Square
amzn.to/2svgnvt 16 X 24 Framing Square Starrett
amzn.to/2sflM5V Milwaukee Circular Saw
amzn.to/2ty4jJz Dewalt Compound Miter Saw
amzn.to/2sAOVaM Stanley 24" FatMax Level
www.blocklayer... Block builder website
In this video I show you how to vinyl side a shed. It is an easy project that anyone can do. The siding color is called Mastic Newport Bay Dutchlap siding. It looks really nice in person (not too blue). Thanks for watching.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
Love the video. Can you please write down the color of the sidling absolutely love it!!!
To anyone watching this, use house wrap, it is your actual barrier against water, Some water will and does get behind vinyl siding, especially were windows are. Were do you think wind driven rain goes after getting in the j trim around the window? Yes down and some gets behind the siding as the j channel doesn’t run straight down to the ground, as say like the corners do, so you count on House wrap to keep the sheathing dry as any water that made it by the siding will run straight down and out. Any play were to pieces of siding meet even tho they over lap, can and do get a little wind driven rain past them. Again this isn’t a issue when installing the House wrap and flashing correctly. This guy doesn’t have a clue.
Thank you
Right off the bat, a seam in between the window and the corner post, why? That's a no-no where a full piece can be used. Tapping on the wall with your hands and the window sash starts dropping down, funny. There is such a thing called condensation, leading up to mold, rot, plywood swelling etc. behind the siding. For a couple bucks more you should have bought some wrapping paper. I enjoy watching DIYer's doing their weekend could of should of projects. I know it's only a shed, but hello.
am I the only one who thinks he talks like FORREST GUMMP ????????????????
It's like preparation for building ( or repairing ) a house or apartment. Bro, I love these vids man!!!!
Curious, what is better having the shed door open from the inside or towards the outside?
Great video, nice Omega. I took a shot everytime you said "level" and now I'm drunk!
Mike Stacy I was looking at the watch most of the time myself :)
Good thing you didn't take a shot every time he said j channel.
If cutting vinyl I personally would say use a wet saw or at least a blade with 80 teeth +
You should never put siding over non protected wood...!
Lot of commercials!
Hello. I am from Switzerland. Looks nice, but vinyl? Thats plastic, oder? Why not aluminium or steel?
It's great that you are trying to help people learn but you need to do it the right way in order for people to this themselves the right way and not waste money and then redo the entire project. House wrap #1, proper window flashing #2 then you can install your siding, don't mislead people into skipping steps and important once!
Thank you. This is why I am watching more than one video and reading the comments
Anyone ever tell you that you sound like Thomas Haden Church?
What color roof shingles will you be using to match your vinyl siding?
Nice video. Thanks for posting, very helpful. Just had one question; how do you make sure the siding is started at the same height all around the building so that it is level all the way around? Thanks
a starter strip helps tremendously
Great video. Thank you.
That's one of the best videos that I've seen in a while that explains what you're doing with the vinyl siding and j channel, thanks for sharing.
Mine works too. I used the Woodglut plans and performed it without any problems.
Is there a reason you put slider windows in as double-hung windows? Your drain holes should be in the bottom and not on the side.
I used these windows because they were $20 a piece and they were matching. I ended up drilling out the bottom so they would drain. I did not know that they were slider windows until the bottom filled up with water. I had to put some painted wood shims in the sides to have them slide vertically properly. Live and Learn.
Excellent video. Thanks. Explanation is ideal for beginners
Hmmm I finally followed Robert's advice and took woodprix. It's great for beginners, and has some advanced stuff too.
Thanks a lot for your sharing :) Excellent video!!!!!
Excellent video!
Excellent video..exactly what I was looking for..thanks for posting! Great job!
you forgot the moisture barrier
I talked about it in the last video. I want the building the breathe because there is going to be spilled water inside the building with it being a pool house. Also there is stone landscape surrounding the outside of the building, so there should be good drainage from the water off the roof.
@@doublewide6 house wrap breathes, it's not a waterproof barrier it's more of a water-shedding material
have a window leaking . looks like I may have to remove siding the gap is more than 1/2 inch at top & too large to caulk. any easy way to seal this?
Thanks
Excellent video, very informative and simple to understand. Thank you!
Really well-explained tutorial for a siding beginner. Thanks.
shouldnt have any seams on a lil shed that size
Can you use wood corners, fascia, and soffit with vinyl siding?
Did you allow and extra with in the cut for the window from one side to the other?
About to do a door and not sure if I should cut my vynle a little wide when I cut the opening for the door.
Yeah that last piece of siding at the soffit is always a joy. Nice tip using the cut off. Looking good man!
That little cut off will keep that piece in place.
Well I just painted my plywood. I built it back when I had no money 28 years ago
28 years is great, have you ever needed to replace the plywood. How often do you need to paint it?
Original plywood. I paint every 10 years or so. It does look rustic now. haha
Excellent video! I'm planning to do my garage sometime soon. Thanks for sharing!
Looks good to me , looks of good tips. Thanks.
No I channel around window?
great video, thank you so much
Telling people that building wrap is not necessary is just criminal .👎👎👎
It's a shed not a house. It's not heated or insulated. This is a hell of a lot better then the painted chipboard shed I have in my yard that I need to fix. It's probably only 10 years old and the chip board exposed directly to the outside is completely sogged and rotten. I was going to just replace the chipboard and paint it with 3 coats of paint but now I am thinking of trying to do siding now that I see how it's done. And then it will last 50 years instead of 10. Just need to replace shingles not rebuild the entire damn thing next time. Whoever owned this house before me was a hack everything they touched was half assed and not designed to last.
The person who owned your house before must have own my house. Same thing for my shed! I will now be looking at replacing the outside with siding.
19:15 Ghost closed the window because the banging was too loud
pro tip : watch movies at flixzone. I've been using them for watching lots of of movies during the lockdown.
@Billy Howard Yea, been watching on Flixzone} for years myself :)
🇺🇸
Thank you....
good man you take your time and think i like that
Thanks James, thinking saves time and money. Get it right the first time.
great video , keep them coming .
2 more on the way. Thanks for tuning in. Bob
Making it look simple, DW.
It is an easy project if you take your time. It is not something I do everyday, but it is all about taking good measurements and being level.
Great job for a shed.
Thanks pugman!
blue
Yes sir. It looks nice against the pool and pool cover.
Great video! Really appreciate you posting this
Nice, Bob. Irwin makes a vinyl blade that's a lot quieter than anything else I've tried. Thanks for sharing, man!
I didn't know there were vinyl blades. Thanks for the tip.
I bought a house with a shed that was finished aside from siding. Was intimidated about doing the siding by ourselves. This video really helped and now we feel confident to do it ourselves. Thanks for the great video! Saved us a few hundred bucks