PRS-33 Assembly Instructions
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Printed instructions are available as a PDF by clicking on Documentation on this page: www.parktool.co...
NOTE: This video is intended as a visual aid for the written instructions and does not contain all details necessary for assembly. Please download the instructional PDF using the link above.
➤ Fix It:
Did you know that Park Tool is the #1 resource for bicycle repair education?
• Visit our TH-cam Channel: / parktool
• Visit the Repair Help section of Parktool.com: www.parktool.co...
• Check out The Big Blue Book of Bicycle Repair: www.parktool.co...
➤ About Park Tool:
Park Tool has been manufacturing bicycle specific tools since 1963. Based out of St. Paul Minnesota, we are the world's largest bicycle tool manufacturer. A long-term dedication to quality, innovation, and customer service has made Park Tool the first choice of professional and home bicycle mechanics around the world.
➤ Subscribe: www.youtube.co...
➤ Like: / parktool
➤ Follow: / parktoolblue
Nice use of the crescent wrench.
Didn’t knew working in a bike shop with that thing could be that fun!
That shifter is bugging me. You don't have an 8mm at Parktool HQ?
One of the fabricator that I work with he made his own version of this lift, he had crank handle and also a motor just incase power goes out.
👍
I’m sure struggling to get my carriage assembly to slide on as easy as the video showed,. I’ve removed it 3 times and tried again and I can barely get it to budge with a rubber matter.
Get a hold of us at info@parktool.com and we can get you some different bearings.
For future customers: put a very slight bevel (chamfer) on the top edge of the tracks to help guide the bearings onto the tracks.
What is being shown at 1:59?
The two carriage bearings are a tight fit, and it is not uncommon for the beam to peal a little material off the bearing as the unit is engaged at the top of the beam.
Those are the shavings that come out after the carriage is slid on. They are not always visible and on some of the newer versions of the stand.
@@parktool Thank you. I see set screws behind the bearings (if too tight or too lose, I assume).
Of crse they dont show/say anything abt installing it without their optional $300 base plate! SMH. Need to know if hardware incl. for bolting to floor and if not what do you need because this thing is totally useless without that small piece of information.
It is in the description of the item online. Some people want to bolt these directly to the floor. Others want to use the floor plate. The hardware to attach it to the plate comes with the plate. If you are attaching it to your floor the fasteners may vary so you will need to provide the fasteners.
Jen pro jednoho asi bude lepší lidi se rádi mezi sebou baví. A pak nic nedělají.
Interesting perspective...