I recently sold the Jeep but up to that point I had no issues other than a couple chips in the finish from rocks. My only regret is not installing the skid plate before selling because now it’s sitting in my garage collecting dust 🙄
Kyle Riedel thank you for the feedback Kyle! It’s a pretty easy install but if you run in to any issues feel free to send me a message. I’ll respond as soon as I receive it!
I tried because the lights that come with the bumper are not very bright. The bolt pattern was totally different than standard round LEDs so I stuck with these. More for show than function.
Just purchased this bumper. Was curious how your wiring went. Can you wire all four lights to the stock light selector that runs on auto and automatically turns your fog lights on. I have a JL btw but imagine it's the same
Hi Justin, I spliced the wires for the round and 6” LED’s on both sides then plugged them in to the factory wires on both sides for the fog lights. That way all 4 come on when I turn on the fog lights. Was pretty simple to do too. I imagine it will be the same for the JL. Let me know when your done how you like them.
Anyone fog lights ( circular ones ) flicker after you turn off the the lights or open a door? I hard wired just those two to the factory fog light harness.
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
The Crush Can never come off. Am I correct? Just curious Incase of an accident. I'm wanting to purchase this nice bumper.
Now that you have had the bumper on for a few years, how has it held up? Any rust or issues with the paint peeling ? Any other issues?
I recently sold the Jeep but up to that point I had no issues other than a couple chips in the finish from rocks. My only regret is not installing the skid plate before selling because now it’s sitting in my garage collecting dust 🙄
Great job on the install! Very helpful as Im about to tackle this exact install myself tonight.
Kyle Riedel thank you for the feedback Kyle! It’s a pretty easy install but if you run in to any issues feel free to send me a message. I’ll respond as soon as I receive it!
Went very well thanks to the tips here, thanks again for posting.
Has anyone upgraded the circular fog lights to the original led fog lights? Has anyone made a video on how to do this?
I tried because the lights that come with the bumper are not very bright. The bolt pattern was totally different than standard round LEDs so I stuck with these. More for show than function.
Also the factory fog lights are larger. These are 3 inch round and the factory are 4 inch
Just purchased this bumper. Was curious how your wiring went. Can you wire all four lights to the stock light selector that runs on auto and automatically turns your fog lights on. I have a JL btw but imagine it's the same
Hi Justin, I spliced the wires for the round and 6” LED’s on both sides then plugged them in to the factory wires on both sides for the fog lights. That way all 4 come on when I turn on the fog lights. Was pretty simple to do too. I imagine it will be the same for the JL. Let me know when your done how you like them.
@@skaggsmedia thanks for reply. Once it comes in I may pick your brain for the install once I see the hardware
@@skaggsmedia also, since you tapped into the factory fog lights did you still have to run power to the battery
Nope, the power from the fog light wires was all they needed.
Ok no problem, let me know if you have any questions.
Anyone fog lights ( circular ones ) flicker after you turn off the the lights or open a door? I hard wired just those two to the factory fog light harness.
Hi Francisco, I haven’t had that issue with mine. Have you tried disconnecting each one to see if you can isolate the issue to one light?