Black Concrete Sink For Bathroom | DIY
ฝัง
- เผยแพร่เมื่อ 22 ก.พ. 2023
- ALL MATERIALS AND TOOLS ARE IN THE DESCRIPTION BELOW
Double Sided Tape- globmarble.com/roll-2-sided-p...
Countertop Edge Form- globmarble.com/concrete-stone...
Plaster Of Paris- globmarble.com/sheetrock-usg-...
Caulking Tool- globmarble.com/caulking-tool-...
Poly-Cap- globmarble.com/trimmed-oval-o...
Poly-Dome- globmarble.com/polydomes-bowl...
Overflow Tube- globmarble.com/sink-bowl-drai...
Overflow Tube Connector- globmarble.com/reusable-oval-...
Captive Nut Assembly- globmarble.com/captive-nut-as...
Beauty Ring- globmarble.com/oval-sink-bowl...
Paste Wax- globmarble.com/mold-release-p...
Face Spray- globmarble.com/gfrc-face-mix-...
Backer Mix- globmarble.com/gfrc-glass-fib...
Precast Modifier- globmarble.com/1-gal-xtreme-c...
Heavy Duty Bucket- globmarble.com/index.php?rout...
Hand-Held Mixer- globmarble.com/decorative-con...
Hopper Gun- globmarble.com/sharpshooter-h...
SCR- globmarble.com/concrete-clean...
EcoStain- globmarble.com/water-based-co...
Slurry- globmarble.com/concrete-slurr...
Foam Roller- globmarble.com/high-density-m...
Pump Sprayer- globmarble.com/2-gal-pump-spr...
Food Safe Sealer- globmarble.com/concrete-count... - แนวปฏิบัติและการใช้ชีวิต
I love it! Great job! Thanks for the inspiration.
Glad it was helpful!!
Great stuff
Thanks!
Really awesome work man I love it.😊
Thank you very much!
I love your videos !!! You are a bad ass !!!!!!!
Thanks!!
Japanese flush trim saws are made to cut when pulling. They work very good for cutting the 45’s on your edging.
Not with the polyurethane rubber edge molds. Those cut much easier/nicer with a sharp straight edge. You're better off using a sharp kitchen knife than a saw.
Very cool!
Thanks!!
Nice work bro
Glad you liked it!!
To adhere your two pieces of foam together, use double-sided tape. You're going to plaster it next so strength is no problem.
I wonder if the double side tape would cause any issued while carving the mold with the zip blade
Nice
Thanks!
Great for a punk decore.
Totally!
👍
can you do this mole for me?
If you had a countertop longer than 8’ how would you deal with the seam in rhe melamine so it didn’t show after flip
Could you elaborate? Which seam?
Not in your form. Just if you had to abut two pieces of melamine. How do you make the seam not show
Just Bondo the seam
Looks great But a lot steps
It's worth it!
NICEEEE! It kinda looks like a turtle shell. The inside of the sink. 🤷🏽♂️
Wasnt the look I was going for, but everyone says that lol
Where do I get the mix And additive?
All materials and tools are linked in the description :)
@@GlobMarble Thanks ! I checked out website it looks great!!!!
Thank you