Thank you very much Peter. You speak clearly and slowly, which makes it easy for me as a Dutchman to follow. Thanks to your favorite equipment, I bought the Lowepro BP 450 AW II camera bag from Amazon. Unfortunately, the AgimbalGear DH-03 handle is currently not available. As MediaCable Netherlands we heartily recommend your TH-cam channel. Kind regards Desmond.
Thanks mate. Love the support, and great to hear that you find my videos usefull. Was at IBC last year. Amsterdam is amazing, hope visit again some time.
How about the video transmission and control from the ZYPlay app. I know the Crane 3 Lab has both included in the standard version but how about the 3S?
Excellent video!!! I have a Weebill Lab for my Sony a6500 and I am planning to get a Sony a7iV and a Zhiyun Crane 3S thanks to your video. I am amazed on your setup. Awesome! I didn't know you could add a monitor. I have tried in my Weebill Lab, but impossible even though it is light. I would also like to maybe add a mic receiver if possible. Ideas please. 🙏 What monitor is that one?
Allright great. If you want to add a mic, the best way is to add a cage to your camera and mout the mic on the side of the cage. Then the mic will follw the direcrion of the gimbal and camera. For just monitoring, the small hd focus or Atamos Shinobi are great options. I would go for the Weebill S instead of the bigger Crane 3s when you are rocking the Sony a7IV. The Crane 3S is pretty heavy. As reference, I used to use the Crane 3 Lab with my GH5 for most of my gimbal work, but now I only use the Weebill S and it is great.
Peter Makholm Thank you so much for yoir quick reply, but I have tried to mount a monitor in my Weebill Lab, but it falls forward or backwards. No chance to stabilize it and it’s way below the workload limit. Is that problem solved in the Weebill S?
Thank you peter for the detailed differences of the crane 3s and crane 3lab. Is the battery life of both the gimbal's same?. Can u make difference video on Zhiyun crane 3s and Crane 3se in future. Thank you in advance.
Hi, yes the battery time is the same on both gimbals 12h. There is no difference between the 3s and 3SE other than the handle. 3S has the screen and buttons where the 3SE has a standard screw on handle. i preffer the 3SE VERSION.
Hi Peter. You shaw the S1H on the crane 3S... but on the web site it seems that some compatibility are not yet ready. Does the S1H work fine with the commands from the crane 3 S?
Everybody talks about the max. load of the Crane 3s which is absolutely a pro for this model. It ´s cool that it can handle a Arri bla and the Red blub but nobody is talking about if it is realistic to carry the combination of a heavy gimbal with a giant and heavy camera for more than 2 minutes. I mean it is cool that the next Zhiyun gimbal will balance a hole motor cycle on it but will anybody be able to hold that in real world situations? In my opinion the Crane 3 Lab reached a kind of limit of weight that makes sense for a handheld gimbal.
I have a question. Do you know if the canon xa40 is too large for the zhiyun crane 3s or must I buy the 3s pro because I already had bought a gimbal for the canon xa40 but the gimbal was too small and I don't want to buy a second time a gimbal which is too small
Hi An adoptor exists for your issue with the quick release. You have the big thread on one side and the small stud on the other and here you go! Great video. I’m wondering between the weebill S and the crane 3S for my Lumix S1 if in the future I put a monitor screen and bla-bla-bla on it... Already does a Weebill S work with an S1 + 50mm S Pro 1.4 ? Do you have a clue ?
Hey Peter! Great video, man! Helo from Brazil! Question: are the original tripods the same on both gimbals? A client broke the one from my 3S and the only replacement I've found online so far was for the 3 Lab. They apear the same on the pictures, though...
Hi peter, for a camera 6k pro with sigma 18 35, I think the crane 3 lab is a good option for less weight and that helps to hold it longer but the 3s is a bit more modern. What gimbal do you recommed for this camera? Thanks!
Thanks mate. Yes. I use FCPX. The font is form a plugin called Mtitle Max 2. The foont is: IBM Plex Sans. Here is the plugin I use. www.motionvfx.com/store,mtitle-max-2,p2366.html?q=MAX+TITLE
Hello, I owned a used Crane Lab. But it comes without the baseplate, so I cannot attach my Camera (bmpcc 4k). What can I buy to get the same function of the baseplate including the possibility to mount the servos for zoom and focus.
Hey! I got my crane 3S in the mail the other day, and it's awesome! but also very confusing. I'm coming from a DJI and MOVI background and those ones are very easy to set up and the apps are amazing for calibrating and making adjustments. but with this one nothing seems strait forward. I got it to use with my c200. I've noticed so far that my follow button doesn't seem to do anything. and on calibrating the gimbal I am unsure if am supposed to do it with the c200 on the gimbal or off the gimbal, and how to do that. do you have any tips or tricks or reasons why I might be having problems with it? if you can I would love to see a guide with setting it up for bigger cameras, and troubleshooting different things. like what all the buttons do and such.
Alright, I can defintly do a video like that, but to get you going, the 6 side calibration has to be done without the camera on. Update you gimbal to the latest firmware v1.77 that will get rid of some miner issues and shakes. The Zhiyun APP is so bad, compared to DJI, wich is super easy to use. The follow button on the handle will only work if you connect the max follow focus motor. hopfully this will help you a bit. Pete
@@PeterMakholm Okey thank you. I need to know if is possible to connect the sensor remote and the receiver image, to the transmitter included in the Crane 3 Lab
Yo, love the info in this video and helped me make a decision. I feel like both of these are a bit much if I'm only gonna use a phone or mirrorless setup. Btw, one thing I noticed in this video is the low frequency thumping noises when you put something on the table. I'm guessing the mic is setup on it? You could get rid of this with a low pass filter in post. Just thought I'd share because when you have a sub it's definitely noticable :D
Have they updated the app since release? Heard it was very underwhelming, but it's been a year so I'm wondering if I should dive in on this or the ronin s. I love shooting underslung, but that seems to be the only category where it's crane 3s is better. Everything else is tied or goes to the ronin, the big win being the app. So have they improved it since?
Elvis Chirinos no the app is still crap. The crane 3s is a heavy beast. I find it the best way to shoot with it is in underslung using a dual.hamdle grip. Check the video here. th-cam.com/video/T3Cf31ac_UA/w-d-xo.html and the follow-up video about the small rig handle. th-cam.com/video/7L4EXiRb7J8/w-d-xo.html. You should consider checking out the Crane 2s it is incredibly smooth. I will soon do a video of how to use dualgrip and underslung for the Crane 2S. What camera are you using?
I own both . And I still prefer the crane 3 lab for my run and gun stuff. I use the crane 3 S strictly for my car rig nothing else. It’s just a lot heavier and annoying to carry .
Thank you for this tutorial, I am having problems with my Crane 3 Lab, I've upgraded it to V1.90 and then I attempted to upgrade the Servo Motors (Max & Lite) but there is a Yellow light that continues to blink. Have you experienced this problem or can you offer me any assistance? I can't seem to find a number for tech support in the US for this manufacturer.
I upgraded my Servo motors a couple of weeks ago with success. I did get the yellow blinking light which I understand is normal but then went to the menu system on the crane and selected the corresponding motor to that which is plugged, eg if the lite motor is plugged while the yellow light is blinking, go to the light option on the menu and select to upgrade. follow that same step with the max.
Isn't there a Pro version too? or is that the 3s ? Or is it just the name if you get the focus and zoom motors and whatnot in the bundle. - I would love to know something noone talks about.. - How broad can the the gimbaal be set. - I would love to be able to balance a Blackpocket camera, where the Lense is Actually in the center of the pan movement :)
Oussama El Guezbari the pro version is not out yet. You will get an extra handle an external battery pack. I understand your point of having the bmpcc in the center. I don't have that camera but I can measure the max distance for you.
You forgot to mention the important fact that the Crane 3 Lab has the image transmission module already included. If you want to use this on the Crane 3s you have to spend more than 100 bucks on top for the external transmission module.
@@PeterMakholm Oh, really? I am planning on getting a Sony a7IV with a Sony 16-35 mm GMaster and monitor (something like your setup) and was thinking about the Crane 3S, so the 3 Lab is OK then?
Dewayne Kennemer hi, You should definitely upgrade your gimbal, but the crane 3s is overkill for an A7R3. You will get tired of the weight of the gimbal. I would go for the Weebill S. It is my favorite gimbal. I have a series of videos about the Weebill S
Peter Makholm awesome question/answer. I’m coming from Crane 3. I thought about the weebill. However, with the difference in cost between the weebill and this new one. I think the new one would be a better choice (future proofing). I currently shoot on a A7iii, a good choice I’ll upgrade to a cinema cam in the near future.
Thank you peter for the straight-to-the-point video. I really liked it. My question is about the packages: In Crane 3 there are different packages: Basic/creative/master Is it the same situation with Crane 3s ? what are the packages for Crane 3s? and what's included in each package? Thank you :-)
lots of people are reporting to have problems with this Gimbel after you got everything new and updated, how is your experience with it? do you feel its smooth and no errors? thanks
You say the Crane 3 can handle 4.5kg payload, and then right after you say it won't handle your fully kitted out S1H which is only 3kg. So what's the deal?
What I mean is you can't have the monitor and handle on the cage of the S1H and use it with the CRANE 3 Lab as you can on the CRANE 3S. The crane 3 lab can easily take the S1H with cage alone.
A gimbal comparison without test footage seems kind of useless to me. Basicly everything you said is written on Zhiyun's website. So please make a video with some test footage side by side. :)
Jim I wish there where one. I don't have any strings attached to zhiyun. The gear I bought my self or where provided to me by the good folks at Focus Nordic. But Zhiyun should consider paying me I know they are watching. But the good thing is that you get my honest opinion about the product.
If you're excited about getting this product then I'm going to let you know now DON'T BE! it's not ready to scale. DO YOUR RESEARCH! and not from Zhiyun either but from the non sponsored customers. They will tell you the truth. Most people who've had problems with it have had to fight very hard WITH NO PAYOFF! A disappointed realization. Hope that other people comment and speak up about his as well.
Have the issues been fixed? I'm looking to do 3S, but I'm starting to lean to the 3Lab due to its now cheaper price and good reviews. I heard nothing but issues with 3S.
Update> If you have a problem with the Crane 3s (it doesn't work) and you don't have the time to deal with ZHIYUN customer service (Which runs on Hong Kong time zone) then it's not worth your tim. Get your money back. Everyone else listen closely, I have a problem with ZhIyun's Business Operations/Communications/Liability Management. If you are here to know if you should buy the crane 3s then i'd say this, if you're still reading then you MIGHT want to go ahead and get it. Specs are Accurate although, = there is a minimum weight. The Crane 3s designed to hold a lot of weight (a little over 14lbs.) Awesome! As far as the software, There's a lot I could say. it needs a lot of work(accuracy/layout/anticipations/ new features/better performance). Look there's no other gimbal in this range of specs and price. What you need to know longevity wise is it's a pain to deal with the company and the software. I hope the updates fix issues. (It Won't) the hardware is great! (not the Software) worth looking into for yourself! (100%) ask more questions. Should I make a video about it?
@@jafarisampson9249 Thanks! More people doing videos, the better! I ended up getting the 3 Lab, because it was almost $400 cheaper for the Master vs the Pro. I wasn't sure if it was worth the $400 dollar upgrade, as I'm running a minimal BMPCC. The biggest worry is I haven't heard much update for people with vibration issues, have you had any of those issues?
4 ปีที่แล้ว
Tried to watch this but the amount of noise you generade everytime the table is touched is unbearable. Please mount the mic somewhere not on the table next time
@@PeterMakholm You generate a low rumble boom that is very loud and jarring in headphones. You can get rid of this by rolling off your lows. You'll still sound natural, but the great video quality will have great audio with it. Great comparison though. Helpful to understand the differences.
Forget either product. The support is so bad, the app is bad. Just had a chat online as the company aren't supporting the new Sony A7s3 or the Canon R5. These guys are a joke. No point buying a product if the company supporting it are useless!
@@PeterMakholm Yep. I'm gutted as the product is reasonable. But I guarantee DJI will offer support almost immediately for all new cameras. Its annoying Zhiyun seem to not even care about the users. Really poor service.
Thank you very much Peter. You speak clearly and slowly, which makes it easy for me as a Dutchman to follow. Thanks to your favorite equipment, I bought the Lowepro BP 450 AW II camera bag from Amazon. Unfortunately, the AgimbalGear DH-03 handle is currently not available. As MediaCable Netherlands we heartily recommend your TH-cam channel. Kind regards Desmond.
Thanks mate. Love the support, and great to hear that you find my videos usefull. Was at IBC last year. Amsterdam is amazing, hope visit again some time.
How about the video transmission and control from the ZYPlay app. I know the Crane 3 Lab has both included in the standard version but how about the 3S?
i would like to see comparison during shooting process with 2x gimbals.
Great comparison! (A heads-up: you spelled Gimbal as Gimabl in the title)
Excellent video!!!
I have a Weebill Lab for my Sony a6500 and I am planning to get a Sony a7iV and a Zhiyun Crane 3S thanks to your video.
I am amazed on your setup. Awesome! I didn't know you could add a monitor. I have tried in my Weebill Lab, but impossible even though it is light. I would also like to maybe add a mic receiver if possible. Ideas please. 🙏
What monitor is that one?
Allright great. If you want to add a mic, the best way is to add a cage to your camera and mout the mic on the side of the cage. Then the mic will follw the direcrion of the gimbal and camera. For just monitoring, the small hd focus or Atamos Shinobi are great options. I would go for the Weebill S instead of the bigger Crane 3s when you are rocking the Sony a7IV. The Crane 3S is pretty heavy. As reference, I used to use the Crane 3 Lab with my GH5 for most of my gimbal work, but now I only use the Weebill S and it is great.
Peter Makholm Thank you so much for yoir quick reply, but I have tried to mount a monitor in my Weebill Lab, but it falls forward or backwards. No chance to stabilize it and it’s way below the workload limit. Is that problem solved in the Weebill S?
Thank you peter for the detailed differences of the crane 3s and crane 3lab. Is the battery life of both the gimbal's same?. Can u make difference video on Zhiyun crane 3s and Crane 3se in future. Thank you in advance.
Hi, yes the battery time is the same on both gimbals 12h. There is no difference between the 3s and 3SE other than the handle. 3S has the screen and buttons where the 3SE has a standard screw on handle. i preffer the 3SE VERSION.
Hi Peter. You shaw the S1H on the crane 3S... but on the web site it seems that some compatibility are not yet ready. Does the S1H work fine with the commands from the crane 3 S?
Everybody talks about the max. load of the Crane 3s which is absolutely a pro for this model. It ´s cool that it can handle a Arri bla and the Red blub but nobody is talking about if it is realistic to carry the combination of a heavy gimbal with a giant and heavy camera for more than 2 minutes. I mean it is cool that the next Zhiyun gimbal will balance a hole motor cycle on it but will anybody be able to hold that in real world situations? In my opinion the Crane 3 Lab reached a kind of limit of weight that makes sense for a handheld gimbal.
I have said this so many times. The Crane 3s is too heavy. And fully loaded it is impossible to handle.
The Crane 3S is compatible for Nikon Z6ii if not now ,When it is possible
Awesome, thanks for the info!! 3S it is!
I have a question. Do you know if the canon xa40 is too large for the zhiyun crane 3s or must I buy the 3s pro because I already had bought a gimbal for the canon xa40 but the gimbal was too small and I don't want to buy a
second time a gimbal which is too small
Great Video Peter, thanks 4 the tips
Great video Peter, Stay safe.
Thanks, you too
Can you provide a link to the side handle and the quick plate?
Question... Could i attach the screw adapter on the Waist belt connector and the monopod and have it fit the crane 3s?
Thank you for the video! will i be able to control my sony camera settings through Crane 3 S
Hello! Thank you, great video, very useful. What do you think about a place for the external focus controller (for example- Tilta Nucleus) on 3s?
then I would monut it on the side handle.
Thank you so much for the comparison. I like it. Can you share your Crane 3 LAB setting of the motor, speed control, follow, smooth? Thanks!
Great video!
What will be the best gimbal for the S1H?
Hi
An adoptor exists for your issue with the quick release.
You have the big thread on one side and the small stud on the other and here you go!
Great video.
I’m wondering between the weebill S and the crane 3S for my Lumix S1 if in the future I put a monitor screen and bla-bla-bla on it...
Already does a Weebill S work with an S1 + 50mm S Pro 1.4 ? Do you have a clue ?
Hi! Very good video! I have a question, do you know if the Zhiyun Crane 3S and the Sony NEX FS100 camera are compatible?
I have one crane 3s and with the camera is D850 .The display and the recording is not function please tell me my next step
Hey Peter! Great video, man! Helo from Brazil! Question: are the original tripods the same on both gimbals? A client broke the one from my 3S and the only replacement I've found online so far was for the 3 Lab. They apear the same on the pictures, though...
I have a sony fs5 will the c3 be better then the lab
Can i use the 3 s with lumix s1h and 24-105 lens
Can u power the camera like a Bm4k from it like the ronin s ?
Hi peter, for a camera 6k pro with sigma 18 35, I think the crane 3 lab is a good option for less weight and that helps to hold it longer but the 3s is a bit more modern. What gimbal do you recommed for this camera? Thanks!
Great review, very informative👍
P.S Dont mount your mic on the table it picks up every vibration.
Thanks for the tip
I saw in video the setup of your camera gear. Can you give me that in detail. The frame ,monitor etc. everything was attached to you camera. Thank u
Yes, I can, if you go to my Amazon storefront, I have everything I use categorized. geni.us/1CEY5i
hello. can i use focus and zoom motors of crane 3lab for crane 3s?
Truly loved your video. Can I know the name of the font style you use and your editing/post software?
Thanks mate. Yes. I use FCPX. The font is form a plugin called Mtitle Max 2. The foont is: IBM Plex Sans. Here is the plugin I use. www.motionvfx.com/store,mtitle-max-2,p2366.html?q=MAX+TITLE
Peter Makholm Cool! Any idea when 3S Pro will be out? Do you think it's worth buying 3S or wait till 3S Pro🧐🤔🤔
Vamsi Krishna Somasi I don’t know when the pro will be out. What camera setup are you using.
Hello, I owned a used Crane Lab. But it comes without the baseplate, so I cannot attach my Camera (bmpcc 4k). What can I buy to get the same function of the baseplate including the possibility to mount the servos for zoom and focus.
Hey! I got my crane 3S in the mail the other day, and it's awesome! but also very confusing. I'm coming from a DJI and MOVI background and those ones are very easy to set up and the apps are amazing for calibrating and making adjustments. but with this one nothing seems strait forward. I got it to use with my c200.
I've noticed so far that my follow button doesn't seem to do anything. and on calibrating the gimbal I am unsure if am supposed to do it with the c200 on the gimbal or off the gimbal, and how to do that. do you have any tips or tricks or reasons why I might be having problems with it?
if you can I would love to see a guide with setting it up for bigger cameras, and troubleshooting different things. like what all the buttons do and such.
Alright, I can defintly do a video like that, but to get you going, the 6 side calibration has to be done without the camera on. Update you gimbal to the latest firmware v1.77 that will get rid of some miner issues and shakes. The Zhiyun APP is so bad, compared to DJI, wich is super easy to use.
The follow button on the handle will only work if you connect the max follow focus motor. hopfully this will help you a bit. Pete
This is what I've been waiting to see! Do a Crane 3 vs Crane 3S vs Glidecam 2020 video.
Crane 3s/lab vs glidecam is comming up soon.
Good video. I have a question. Does the TransMount Motion Sensor Remote Controller work with the crane 3 lab too? thanks
Diego Alarcos I haven't tested that. But I don't think it will. I'll try it out.
@@PeterMakholm Okey thank you. I need to know if is possible to connect the sensor remote and the receiver image, to the transmitter included in the Crane 3 Lab
Can I setup my fs5 mark ii with 18-105 lens on crane 3 lab?
Great video Peter🤙
thanks mate
Yo, love the info in this video and helped me make a decision. I feel like both of these are a bit much if I'm only gonna use a phone or mirrorless setup.
Btw, one thing I noticed in this video is the low frequency thumping noises when you put something on the table. I'm guessing the mic is setup on it? You could get rid of this with a low pass filter in post. Just thought I'd share because when you have a sub it's definitely noticable :D
Have they updated the app since release? Heard it was very underwhelming, but it's been a year so I'm wondering if I should dive in on this or the ronin s. I love shooting underslung, but that seems to be the only category where it's crane 3s is better. Everything else is tied or goes to the ronin, the big win being the app. So have they improved it since?
Elvis Chirinos no the app is still crap. The crane 3s is a heavy beast. I find it the best way to shoot with it is in underslung using a dual.hamdle grip. Check the video here. th-cam.com/video/T3Cf31ac_UA/w-d-xo.html and the follow-up video about the small rig handle.
th-cam.com/video/7L4EXiRb7J8/w-d-xo.html.
You should consider checking out the Crane 2s it is incredibly smooth. I will soon do a video of how to use dualgrip and underslung for the Crane 2S. What camera are you using?
I own both . And I still prefer the crane 3 lab for my run and gun stuff. I use the crane 3 S strictly for my car rig nothing else. It’s just a lot heavier and annoying to carry .
Awesome video!!! Thanx broski
Thank you for this tutorial, I am having problems with my Crane 3 Lab, I've upgraded it to V1.90 and then I attempted to upgrade the Servo Motors (Max & Lite) but there is a Yellow light that continues to blink. Have you experienced this problem or can you offer me any assistance? I can't seem to find a number for tech support in the US for this manufacturer.
Sorry mate, havent upgraded my servo motors.
I upgraded my Servo motors a couple of weeks ago with success. I did get the yellow blinking light which I understand is normal but then went to the menu system on the crane and selected the corresponding motor to that which is plugged, eg if the lite motor is plugged while the yellow light is blinking, go to the light option on the menu and select to upgrade. follow that same step with the max.
Is the Crane 3s compatible with the blackmagic 6k pro?
You will need an extension plate. You should take a look at the Crane 2s instead.
Witch gimbal is better, the Crane 3S, or the Crane 3 lab. what do you think.
Isn't there a Pro version too? or is that the 3s ? Or is it just the name if you get the focus and zoom motors and whatnot in the bundle.
- I would love to know something noone talks about.. - How broad can the the gimbaal be set. - I would love to be able to balance a Blackpocket camera, where the Lense is Actually in the center of the pan movement :)
Oussama El Guezbari the pro version is not out yet. You will get an extra handle an external battery pack.
I understand your point of having the bmpcc in the center. I don't have that camera but I can measure the max distance for you.
@@PeterMakholm I will find you on face if you dont mind - I am also from CPH :)
Amazing!!! Amazing!!!
if i connect my a7iii with pc remote can i use smartphone control and hdmi is there any issue
Really don't know mate.
Hey, what's that attachment for your monitor on your cage?
It is s smallRig top handle and a tilt and swivel mount also from smallrig.
amzn.to/2O1dZ8G
is the mike mounted to the floor?
No. When I made that video the mic was mounted to the table.
i use bmpcc4k ... do you think the Crane 3 Lab able with fullrig setup?
I am not really sure. I can use my S1H in a cage but it is not as wide as the BMPCC4K
What's the max weight you've tried putting onto the 3S and how did it perform? I ask because my rig is 4.5-4.9 kg. Thanks
T.J. Penton the largest I have had on there is my S1H setup, but my colleague had an fX9 on there with no problem.
Does the crane 3s also handle lighter camera’s like the Sony a7iii with zoom 24-75mm. I’ve heard that the gimbal will vibrate with too light camera’s.
With a smaller setup like that I would go for the Weebill s. The weight of the crane 3 s is no joke.
Amazing Crane 3s Gimbal 🤩
You forgot to mention the important fact that the Crane 3 Lab has the image transmission module already included. If you want to use this on the Crane 3s you have to spend more than 100 bucks on top for the external transmission module.
Yes that is correct.
I have the crain 3 lab I don't see a need to upgrade due to the fact I shoot with Sony
Ride with Rome exactly, you would not find it any better. Just heavier.
@@PeterMakholm Oh, really? I am planning on getting a Sony a7IV with a Sony 16-35 mm GMaster and monitor (something like your setup) and was thinking about the Crane 3S, so the 3 Lab is OK then?
I've been debating upgrading my crane 2. Curious if it makes sense to jump right into the crane 3s or buy the crane 3? I'm currently using a A7R3
Dewayne Kennemer hi, You should definitely upgrade your gimbal, but the crane 3s is overkill for an A7R3. You will get tired of the weight of the gimbal. I would go for the Weebill S. It is my favorite gimbal. I have a series of videos about the Weebill S
Peter Makholm awesome question/answer. I’m coming from Crane 3. I thought about the weebill. However, with the difference in cost between the weebill and this new one. I think the new one would be a better choice (future proofing). I currently shoot on a A7iii, a good choice I’ll upgrade to a cinema cam in the near future.
Crane 3 lab can fix in lumix s5
IM HAVING PROBLEMS STABILIZER THE GIMBAL I WONDER IF YOU PLEASE CAN HELP ME1!
Hi What is you issue, and what gimbal do you have.
Thank you peter for the straight-to-the-point video. I really liked it. My question is about the packages: In Crane 3 there are different packages: Basic/creative/master
Is it the same situation with Crane 3s ? what are the packages for Crane 3s? and what's included in each package? Thank you :-)
ther are three versions Crane SE, Crane 3s and crane 3s pro.
I'm just in time!
I use a 1DX do you think the Crane 3 Lab is strong enough.
MuteOptics it is definitely strong enough. But you might have a problem with the height.
lots of people are reporting to have problems with this Gimbel after you got everything new and updated, how is your experience with it? do you feel its smooth and no errors? thanks
The wobbling effect is gone, but I still think it is a heavy gimbal. It isn't any smoother than then crane 3 lab.
Peter Makholm I own a red Gemini, so I do t have a choice. I’m going to combine it with my steadycam and make it operate like the arri terinity
@@jonravid3234 ok, please send me some footage of that monster when you got it up and running. sounds interesting.
Peter Makholm will do 👌🏼
I ordered one from B&H, but it seems like I won't be getting it for a while, how did you get yours so quick?
Elias Jessop hey, it is a test model from zhiyun. The Amazon link i have, it should ship evidently
You say the Crane 3 can handle 4.5kg payload, and then right after you say it won't handle your fully kitted out S1H which is only 3kg. So what's the deal?
What I mean is you can't have the monitor and handle on the cage of the S1H and use it with the CRANE 3 Lab as you can on the CRANE 3S. The crane 3 lab can easily take the S1H with cage alone.
@@PeterMakholm Because of weight, or because the handle gets in the way of the motion?
Dalton Randall because the monitor and handle will be in the way when going in to sling mode. It can handle the weight.
@@PeterMakholm Great, thank you for the clarification. :)
Can the Crane 3S use the same focus and zoom servos from the Crane 3 Lab?
Yes, they both work on the Crane 3S
What is that low frequency thumping in the video? That's really annoying.
A gimbal comparison without test footage seems kind of useless to me. Basicly everything you said is written on Zhiyun's website. So please make a video with some test footage side by side. :)
I hear what you are saying. But this video what more a comparison of what will you get if you upgrade form the Crane 3 lab to the Crane 3S.
I suggest you change the spelling of "GIMABL" in the title to Gimbal....cheers.
Thanks for the heads up mate.
Cran 3 lab
Supporting canon 90d
@10:46 you should say: Stay Home and be Safe 😉
Yeah, that is right, I,ll change it in the next video.
Zhuin?
My man...How big is tha paycheck or how much free gear do you get from Zhiyun? 🤣
Jim I wish there where one. I don't have any strings attached to zhiyun. The gear I bought my self or where provided to me by the good folks at Focus Nordic. But Zhiyun should consider paying me I know they are watching. But the good thing is that you get my honest opinion about the product.
@@PeterMakholm We need to get you on the payroll.
If you're excited about getting this product then I'm going to let you know now DON'T BE! it's not ready to scale. DO YOUR RESEARCH! and not from Zhiyun either but from the non sponsored customers. They will tell you the truth. Most people who've had problems with it have had to fight very hard WITH NO PAYOFF! A disappointed realization. Hope that other people comment and speak up about his as well.
Have the issues been fixed? I'm looking to do 3S, but I'm starting to lean to the 3Lab due to its now cheaper price and good reviews. I heard nothing but issues with 3S.
Update> If you have a problem with the Crane 3s (it doesn't work) and you don't have the time to deal with ZHIYUN customer service (Which runs on Hong Kong time zone) then it's not worth your tim. Get your money back.
Everyone else listen closely,
I have a problem with ZhIyun's Business Operations/Communications/Liability Management. If you are here to know if you should buy the crane 3s then i'd say this, if you're still reading then you MIGHT want to go ahead and get it. Specs are Accurate although, = there is a minimum weight.
The Crane 3s designed to hold a lot of weight (a little over 14lbs.) Awesome!
As far as the software,
There's a lot I could say. it needs a lot of work(accuracy/layout/anticipations/ new features/better performance). Look there's no other gimbal in this range of specs and price. What you need to know longevity wise is it's a pain to deal with the company and the software. I hope the updates fix issues. (It Won't) the hardware is great! (not the Software) worth looking into for yourself! (100%) ask more questions. Should I make a video about it?
@@jafarisampson9249 Thanks! More people doing videos, the better! I ended up getting the 3 Lab, because it was almost $400 cheaper for the Master vs the Pro. I wasn't sure if it was worth the $400 dollar upgrade, as I'm running a minimal BMPCC. The biggest worry is I haven't heard much update for people with vibration issues, have you had any of those issues?
Tried to watch this but the amount of noise you generade everytime the table is touched is unbearable. Please mount the mic somewhere not on the table next time
The mic is not on the table. The rattling is not from the microphone it is the gimbals that rattles within in the locks.
@@PeterMakholm You generate a low rumble boom that is very loud and jarring in headphones. You can get rid of this by rolling off your lows. You'll still sound natural, but the great video quality will have great audio with it. Great comparison though. Helpful to understand the differences.
perfect
Forget either product. The support is so bad, the app is bad. Just had a chat online as the company aren't supporting the new Sony A7s3 or the Canon R5. These guys are a joke. No point buying a product if the company supporting it are useless!
Alex James What!!!!! Are you kidding me. They obviously don't want new customers. It will be interesting what DJI are announcing tomorrow.
@@PeterMakholm Yep. I'm gutted as the product is reasonable. But I guarantee DJI will offer support almost immediately for all new cameras. Its annoying Zhiyun seem to not even care about the users. Really poor service.
Alex James yes. They have one thing in mind and that is to pump out new products asap.
TAAAAAAAAANXXXXXXXXXXXXXXX
Zhuin?