B1049 NISSAN QASHQAI , HOW TO REPLACE NISSAN QASHQAI SQUIB RING OR CLOCKS SPRING
ฝัง
- เผยแพร่เมื่อ 24 ก.ย. 2022
- ~-~~-~~~-~~-~
Please watch: "Step-by-Step Guide: How to Replace Wheel Bearing on Toyota Verso 2007 Front Left Wheel"
• Step-by-Step Guide: Ho...
~-~~-~~~-~~-~ - ยานยนต์และพาหนะ
Instructions and explanation of important points are crystal clear. Replaced my nissan qashqai clock spring.
Thank you for your feedback! I'm glad to hear that the instructions and explanations were crystal clear for replacing the clock spring in your Nissan Qashqai. If you have any more questions or need further assistance, feel free to ask!
Brilliant - this worked perfectly for my wife's 2007 Qashqai. Thank you kindly for your excellent video - total cost £18.
Nice to hear
Thank you
Superb guidance Brother,very good step by step explanation
Thank you so much 🙂
Nice job. Thank you for sharing.
Brilliant video thank you
Nice job bro🍻
A lot of people say to disconnect the battery first is this right.Think supposedly air bag could go off if don’t is that right.?
very well explained. Top guy
Thank you very much
Thank you.. Very helpful :)
Thank you
Nice video I just replaced my clock spring qashqai 2012 I am getting a angle sensor fault it all seemed to go back together ok but I think after watching this I will take it apart and check to make sure it went together plus I am having a nightmare with the steering wheel it’s not straight took it back off and lines don’t line up no matter what I try any help would be greatly appreciated
Hey there! Thanks for watching the video, and I'm glad it was helpful to you. It sounds like you're encountering some challenges with your clock spring replacement on your Qashqai.
Firstly, regarding the angle sensor fault, it's definitely a good idea to double-check your installation to ensure everything is properly aligned and connected. Sometimes, even a small misalignment or missed connection can trigger such errors. Taking it apart and inspecting the assembly closely, following along with the steps in the video, might help you identify any issues.
As for the steering wheel alignment, it can be a bit tricky to get it perfectly straight sometimes. Make sure you're aligning it correctly onto the steering column spline. If the lines aren't lining up, it could indicate that the steering wheel isn't sitting flush or that there's a misalignment somewhere in the assembly process. Double-checking your steps and possibly seeking assistance from someone with experience in steering wheel installations could be beneficial.
If you're still having trouble after rechecking everything, it might be worth reaching out to a professional mechanic or the dealership for further assistance. They can provide hands-on support and ensure everything is correctly installed and aligned. Good luck, and I hope you get your Qashqai sorted out soon!
Thank You
@@sanumotorswithcharlie hi thanks for your reply I think I am sorted I took everything off all ok sorted the steering wheel alignment didn’t have the wheels completely straight so did that lined everything up not all good no codes no lights on dash and straight steering 👍👍👍👍👍
well done , thanks
Brilliant, thanks for that.
Thank you very much for feedback
Very very very usefull, thanks a lot.
Thank you so much for tuning in and watching our video. We really appreciate your support! If you enjoyed the content, please don't forget to give it a thumbs up (like) and consider subscribing to our channel for more exciting updates on everything motors.
Also, feel free to check out our online store at "sanumotors.store" for some fantastic products. We're sure you'll find something you love!
And if you'd like to show some extra love and support, you can donate to us through PayPal by clicking here: "www.paypal.com/donate/?hosted_button_id=T8JXESDBSDTFJ". Every contribution goes a long way in helping us create more great content.
Brilliant!
Thank you
Im ordering one for a 2013 rhd qashqai + 2, some parts have 2 cables and some have 1 - can you advise which to choose??? Great video btw!!
I appreciate your kind words about the video, but I'll need more information to assist you with your order for a 2013 right-hand drive (RHD) Nissan Qashqai+2. It sounds like you're referring to a component that has both single and double cables, but without more details about the specific part and its function, it's difficult to provide a recommendation.
To determine which option to choose, you should consider the following steps:
Identify the part or component: Determine the exact part or component you're looking to replace or install. This will help you narrow down the options and understand its purpose.
Consult the vehicle's manual: Check your vehicle's manual or consult with a local Nissan dealership or a qualified mechanic. They can provide you with detailed information about the specific part and whether it requires a single or double cable.
Match the part: Once you've identified the part and its requirements, you can then order the appropriate replacement that matches the original part in your vehicle.
Seek expert advice: If you're still unsure after consulting the manual or dealership, it's always a good idea to seek advice from a professional mechanic. They can inspect the part and provide guidance on the correct replacement.
Providing the part number in question would also help me offer more detailed advice. Feel free to provide additional details, and I'll do my best to assist you further.
thank you
Thank you for sharing Charlie.
Perfect walk though!
Nice video.
I heard poeple say there a 2 types clockspring...1 or 2 wires for airbag on model 2010 because that was ä facelift year for the Qashqai.
@@robpracht9303 there is I bought 1 of each and they were still the wrong fit 🙈
@@jasongroody9137 did you get it sorted mate?
Thank you so much for this video
Please can you also give your address as I have 5 Qashqai cars in family and all have same problems.
I want bring them to you to fix it
Please reply as soon as possible
You can bring your Qashqai cars to Sanu Motors for repair. Here are the details for the garage:
**Sanu Motors Ltd**
- **Address**: 76A College Road, Bromley BR1 3PE, United Kingdom
- **Phone**: 0755 102 1029
- **Email**: info@sanumotors.com
- **Opening Hours**:
- Monday to Friday: 9 AM - 6 PM
- Saturday: 9 AM - 3 PM
- Sunday: Closed
Sanu Motors provides a variety of services including full car servicing, diagnostics, and repairs. They have received excellent reviews for their customer service and quality of work, especially noted for their fair pricing and effective communication.
You can contact them directly to book an appointment or get more information.
For more details, you can visit www.sanumotors.com
Thank you
Bravissimo.
Sorry English please
Good boy
❤❤❤❤❤❤
Thank you
Well ,
I have a similar problem.
My air bag light is blinking , ..can not stop it ,unless if i change the plague
Better to take scan report. After that you know what happens there.
Thanks
@@sanumotorswithcharlie thanks for your reply .!
Finally ,the technician I'm going , speaks about a plague in the steering wheel .
Thank you so much 🙋🏻♂️. I bought the same car and just before I did a mechanic changed the clock spring. The steering goes slightly left. The wheels are straight and indicators are not automatically going off too. Do i need to calibrate or remove everything and see if installed properly ? What could that be please?
Buying a Squib ring off the internet and attaching the steering angle sensor would appear to be the cheapest way of doing this even with extra labour costs attaching the sensor to the squib. Am I right in thinking this? The cost of the Squib ring is now 200 plus VAT (£40) direct from Nissan. Are Squib rings reliable off the internet or is it a bit of a risk?
Did you buy one from the internet?
@@davidwebster5217 not yet. MOT not until end of August, so will get a little later as my engine light is still on.
@@paulwhyte956 keep me updated how you get in mate
hullo there ..Sir .!
as I wrote and above , finally I may have to buy the steering wheel spare part , because ,my airbag light is not stays off , after all those tricks ,I found in you tube , even if ,my local technician turn it of by his computer .
The part ,is about 200 Euros , plus the technicians costs .
I'm from Cyprus , and i have one QashQai 2008 model , with 212.678 km on the screen .!
@@paulwhyte956 did you fix it yet mate
Quanto costa il pezzo da cambiare
Thanks
Hi done this cause the abs light to come on after is this normal
Please Send video clips to our what’s app
I don't have any , mechanic replaced the clock spring light went off then wen driving the abs light came on , steering was locking , put old part back in light came back on for air back but no abs light
Look like somewhere wrong
Mechanic thinks fault part ? Re ordered another clock spring hoping it's right
Bet the steering angle sensor wasn't lined up properly with the scuib ring. Watch this video again and he shows how to attach it correctly.
I did this job now my car wont crank over any ideas
Did you disconnect the battery. Or check how is the battery. Might be battery death.