DIY Unique Wood Planter Box
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- How to make unique wood planter box using wood.
Don't forget to share, comment, like and subscribe
How to turn wood pruning into wooden planter box, see in this video.
Use the wooden planter box for garden decor.
==================================
Thanks for Watching, Subscribe and Share!
==================================
very pretty - nice looking for inside your home!!
😉👍🤝🤝🤝🤝
4:12. 8/12/24. I just made this. ALL ANGLE CUTS ARE 45 DEGREES. I made each piece 9 inches long. Equates to a diameter of 19 inches. Pretty big. Maybe start with a smaller piece. ( 7 inch?). I used inch and one half screws. I attached each "layer" with glue (Titebond Ultimate) and secured with 2 and one half pneumatic 16 gage nails. I ripped the wood to 1.5 by 1.75. My concern was having sufficient nail length (2.5 inches) to secure each layer. My thought, the nail penetration into the lower layer of 0.75 inches would be sufficient to hold layers together till the glue dries.
what angle did you use to make your octagon pots
That’s a really clever build. Thanks for sharing.
What an absolute stunning project, such a fantastic master piece 👏👏
Good!
Beautiful! New subscriber here!
What angle is that cut?
I think 45 Degrees.
nice video☝☝☝👍👍👍
Very nice! What angle did you cut your small boards with! This turned out gorgeous! Thanks for sharing!
Hi pinkfluffydino it seems that there are eight sides if you divide 180 degrees by the the number of sides it should give you the angle of 22.5 degrees. Terry
@@terencemeredith3066 Nice! Thanks!
Sorry its late but just tried building one myself.... And the cuts where made at 45 degrees since there single miters and double which would make them in an agle of 22.5. But since its one miter connecting both pieces the miter will be a 45
@@rogeliochavira4524 makes sense! Thank you
Dobra praca pozdrawiam,,,
В комплекте замечательного набора инструментария не хватает вертикально-сверлильного и схемы-размеров деталей для кашпо (для понимания начинающих).
Видно что из России 😂А какой угол
Just wish there were plans for this
🤝
what is the size of the pieces of wood
под каким углом резали на торцовке?
Probably 22.5
What type of varnish are you finishing the wood with?
How long is each piece?
Is that a 45 degree angle?
Супер молодец хороши 👍👍👍🤝
🤝
@@visitingthemaster6422 👌
Hi nice work. So can you tell me what kind of brand is your planner??
Show
I'm #666 on likes. Do I win a set of plans for this project?
Esplica las medidas ycomo lo estas pegandofome tu video🤔🤔🤔🤔
Sorry how many peices?
?
@@visitingthemaster6422 how many blocks?
@@MrTomoyzf13 There are 8 pieces in a row, 48 pieces in total
How do you calculate the length of the pieces for a certain size pot inside?
0