Hi, i'm stuck at 13:43. Please can you help me? I am not able to display the x y x coordinates of the intersection points. How can I enable this visual option? Thank you
Mirko Nardi Ok, I see. I have to check if there is an option do deactivate it, because I didn´t enable it, it is the default setting after all. So I will see if I can find the switch.
Mirko Nardi Hi Mirko, I checken my sketch preferences - but I couldn´t find a switch. You did everything the same way as I? if use the "intersection point" feature in the sketch in a different situation, does a axis-system with the axis-system in the intersection point show up?
hello sir when i was trying to make this design so there is a problem last one method when you made circle 10mm and then you use studio surface there when i was using studio surface i can,t make perfect shape in NX8 so what should i do pls sir reply me
You are the best sir and really I have learnt a lot from your videos ; please explain for me how you change the sketch parameters from details in the part navigator? Mine don't have any value s and to change I have to reopen the sketch thanks a lot for your appreciated reply
@@wolfgang.walden.cad.training thanks for your prompt reply I use nx 1938 ; I already select it for the feature I find value but for sketch nothing. I think it needs something in the customer default settings thanks again
Maybe, but I´m using nx 12 and it is active by default, so I´ve never had to check if there is any option in the settings. Maybe it is depending on the chosen -"role"?
Ausgezeichnete Videos! PS: Man könnte sich die Mühe mit dem Zeichnen des Bogens am Ende sparen und die Funktion "Durch Kurven" nutzen. Dabei abwechselnd die einzelnen Linien und den Punkt auswählen. Strömungsrichtung auf "Senkrecht" stellen, die nötigen G1 Bedingungen vergeben.
Hi, i'm stuck at 13:43. Please can you help me?
I am not able to display the x y x coordinates of the intersection points. How can I enable this visual option?
Thank you
Hi, you mean the axis-system on the intersection point? You are using NX 10?
correct. yes, I'm on NX10
Mirko Nardi Ok, I see. I have to check if there is an option do deactivate it, because I didn´t enable it, it is the default setting after all. So I will see if I can find the switch.
Thank you Wolfgang. I'd appreciate this
Mirko Nardi Hi Mirko,
I checken my sketch preferences - but I couldn´t find a switch. You did everything the same way as I? if use the "intersection point" feature in the sketch in a different situation, does a axis-system with the axis-system in the intersection point show up?
hello sir when i was trying to make this design so there is a problem last one method when you made circle 10mm and then you use studio surface there when i was using studio surface i can,t make perfect shape in NX8 so what should i do pls sir reply me
Sorry, where and when did I make a 10mm circle, I don´t recall.
sir i don,t know 10mm or 10inch but you made one circle
anjum ali I always use mm, but which circle do you mean? I made the following diameters: 1mm, 2mm, 50mm, 60mm, 100mm, 25mm,
sorry sir my mistake 10mm not 1mm when i make 1mm circle and use studio surface feature there i can,t make perfect circle in NX8
Great :) - Happy New Year!
You are the best sir and really I have learnt a lot from your videos ; please explain for me how you change the sketch parameters from details in the part navigator? Mine don't have any value s and to change I have to reopen the sketch thanks a lot for your appreciated reply
You have to select the feature in the navigator and then you can see the parameters in the details. Which version of NX do you use?
@@wolfgang.walden.cad.training thanks for your prompt reply I use nx 1938 ; I already select it for the feature I find value but for sketch nothing. I think it needs something in the customer default settings thanks again
Maybe, but I´m using nx 12 and it is active by default, so I´ve never had to check if there is any option in the settings. Maybe it is depending on the chosen -"role"?
@@wolfgang.walden.cad.training thanks a lot for your time
how that surface/sheet translated into solid ?
Hi - if you completely close your surface - it will be automatically transformed into a solid.
oooh!!.. thanks
HAPPY NEW YR! SIR
Ausgezeichnete Videos!
PS: Man könnte sich die Mühe mit dem Zeichnen des Bogens am Ende sparen und die Funktion "Durch Kurven" nutzen. Dabei abwechselnd die einzelnen Linien und den Punkt auswählen. Strömungsrichtung auf "Senkrecht" stellen, die nötigen G1 Bedingungen vergeben.
Danke fürs Lob, ja viele Wege führen zum Ziel ;)
you are amazing
Thanks a lot :) - you giving me too much credit!
Wolfgang Walden i got a job in Mexico because i learnt watching your videos
thank you