Bubble magus curve 5 overflowing
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- This video I talk about the bubble magus curve 5 overflowing . I have figured out a way to fix this problem for me . Hopefully this video helps out any questions or comments feel free . If you like the video please LIKE it that way other people can see this video too ! . Thanks guys hope it helps
-your fellow Reefer
The adjustable knob does nothing with the air. That small tube next to it is for the air. But it is Not adjustable. That is just there as a silencer. The knob controls the water flow Exiting the skimmer column. And that is how you control the hight of where your bubbles are.
Very nice tutorial. I like the images you captured. It's a pain doing a video of your sump isn't it?
thanks for the video, i am going to pull my curve a5 out of the garbage now because i had just about given up! my wife thanks you and so does my Visa!
Yes i set up 65g with 20g sump and my curve 5 making same problem. I end up adding 3 1/2 high 2 in PVC pipes on each legs now it's skimming much better .. thx for the tips.. 🙏
That sucker is going crazy. I know that every time I totally clean the skimmer it takes like 2 weeks to break in again which is annoying
Billy Pipes yea I got it finally deep skimming again thank god . Raising it was the solution though ! First pic on this video you see how it looks when it is doing a heavier green skim which is doing again now 👍🏻
have the new a5 skimmer from bm and it's even worse. says 8 inches. I left it at 8 inches and put a air valve in the air line to control amount of air. That max 3 2 1 is the flow out of the skimmer. Not air related.
Cole Barone my skimmer is doing great now , just give it time ! If it helps I would raise it as high as u can without it overflowing , then gradually overtime lower it . Good luck !
Cole Barone did u raise your a5? I have problem with my skimmer, all the gunk is collecting around the neck
Bro, had my BMC5 for almost 2yrs and its always been very finicky and overflowing. I just tried your method and lifted it up until the right level occurred. I was a 1/8 needed. I tried it and BOOM!! It worked!!! Perfectly!! Thank you!!
Hey, not to be a smart ass but isn’t what you did common sense. I figured that out two months into getting my first Protein skimmer. I can’t believe that there’s people out there that have tanks that can’t figure out how to properly run a skimmer…
Taking 2 months to figure something out doesn’t sound like common sense lol
@@yourfellowreefer7145 maybe I failed to mention that’s two months into the hobby as well..
And just a tweak the skimmer sometimes it takes more than two months
Dont buy this skimmer. I have same issue and mine just blasts microbubbles everywhere
I would think you want to get a height that works with the air set at the middle, then you can adjust the air up or down
laminar flow yea it’s all about the height that is the key 🔑 !
And I subbed you !
Any under water Venturi will eventually clog . This is where the it line connects too .
Perché il mio non fa così tanta schiuma?
The Venturi is salt creep clogged.
I have the curve 9 and I am getting way to much air bubbles in my sump. Does anyone have a suggestion?
Etech Etecho hey i just recently switched back to the curve 5. In the beginning I had a few but realized my water was to low in my sump . Try raising the water as that worked for me . Best of luck
Hi the max produced more wet skimming.. rather put it in min to starting and then adjust it ...
Lixi Lineas I think it’s the opposite . Max should be the most amount of restricted airflow . Min should be the least causing it to skim more
Why you just didn't add a air valve o adjust the air flow just that simple want look so ugly
leonard edwards the thing in the left is the air valve which adjusts the air flow , and this video is old mine is fine now
your fellow reefer what did you do if you don't mind me asking because I tried lifting I and cleaning each part but it still didn't do anything. So I cut the hose and put an valve on it
your fellow reefer I have a octopus 202 plus which I adjusted the valve even to the lowest setting but it didn't work.
Have u lowered your skimmer? What is the current depth of water it’s in?
D Tra this video is old skimmer has been fixed by then
its totally built wrong
send it back or modify it... stop complaining
Hey Dan ! It turns out it was just new in sump and had to adjust and settle in, had this for a few years now not complaining at all ! Thanks though !
Hi! I got the Curve 5 like 1.5 weeks ago and it's still overflowing like crazy. I did the lifting up thing like you said in the video but it's still overflowing with the minimum amount of water in there to allow it to work. Do I just have to wait it out longer for it to break in? :L
Oh yeah, my tanks empty too. It just has sea water, sand and artificial live rock in it and I'm waiting for it to cycle.
Raise is up with your hand with the lid off , and see where it stops overflowing . Once u find out where it stops no matter how high then that’s where you will put the egg crates too . Put it on 3 . If it’s a new skimmer give it time . Hopefully this helps .
-your fellow reefer
Yeah, even when the water levels just above the pump it's still overflowing on the max setting. :(
I'm doing a fishless cycle and when I shake the bag of fish food that's in my sump which is decaying (and it lets out small particles of fish food into my sump)- it stops overflowing? Is that normal?
Henry since the take is so New it’s prob not that dirty honestly. I would give it time, another week
-your fellow reefer
Henry I put a valve on the air hows to adjust the air