I have really come to like my AT10 radio . It is so user friendly compared to other radios I have now and had in the past . And so far I haven't gone even close to the range limit . I've only been about 600 yards and the first signal bar was just starting to blink in and out so I'm guessing it should work great 1 to maybe 1.5 miles if your up at 400 feet . and not blocked by a lot of trees . Watching your videos helped me to decide on the AT10 Thanks . Now Radiolink needs a receiver that can use all the switches and knobs . I have everything on the NAZA M Lite working perfect and still have only used 3 switched and one knob . Using the Storm 32 3 axes gimbal , think I will take the knob off the Naza and operate the gimbal from only the receiver . Don't know if you can use signals from both receiver and Naza at the same time on the gimbal . Anyway thanks I have learned a lot from your videos their great and fun to watch , and really like the way you explain things in easy to understand instructions , because I'm always afraid I'm going to smoke something , and you know how it is once you let the smoke out , the magic is gone . Have a great day . Spencer
Olá amigo tudo bem. Obrigado pelo video. Se vc pode me ajudar estou com um probleminha com minha STORM 32 pois não estou conseguindo controlar meu PITCH, Roll e YAW. Pois eu estou estou ligando GND da placa no negativo do receptor e RC0 na saída de sinal do canal 4, RC1 na saída de sinal do canal 5 e RC2 na saída de sinal 6. Porém eu não estou tendo resultado de controle do gimbal. Meu gimbal está calibrado pronto pra uso mas estou com esse problema de controle. VOCE PODE ME AJUDA?
Hi! Great video, thanks for showing your results! I want to ask you one doubt I have, do you know how to calibrate the orientation of the gimbal? I can't get it to look straight ahead. THANKS
Hi There, Very Nice project. I have just finished building an S550 Hexacopter with 2 axis gimbal similar to yours. I have a video transmitter hooked up to the frame to transmit video from the 2 onboard cameras. What kind of frame are you flying. I am using radiolink At9s transmitter R12ds receiver and APM 2.8 flight controller.
Hello budy, how are you. Thanks for the video. If you can help me, I have a little problem with my STORM 32 because I can't control my PITCH, Roll and YAW. Because I am connecting GND of the board to the negative of the receiver and RC0 to the signal output of channel 4, RC1 to the signal output of channel 5 and RC2 to the signal output 6. However, I am not having a result of gimbal control. My gimbal is calibrated ready to use but I have this control problem. CAN YOU HELP ME?
There is no battery rail, I just balance the battery between the mounting rails at the bottom and use velcro straps and elastic bands to keep it in place.
Hello, very useful video, since I am planning to connect it with AT9 which is pretty similar. Do you know how to connect to Naza Light this Gimbal. DJI recommends to connect to F1 and F2 channels in Naza. I am a bit confused with that.
hi mate got my strom32 gimbal but getting shuddering in the video not jello thinking that it was from the quadcopter so tryed it in my hand still the same would that be down to pid
thanks so much!! A long time ago I was looking for something like this!! what are the specifications of your drone? frame , ESC, brushes and motor? thanks for your videos!
I suggest you start here where the tuning system is explained. My gimbal has broken so I am waiting for replacement before I can do a tutorial.: www.olliw.eu/storm32bgc-wiki/Tuning_Recipe
How did you make the cable connection to the radio receiver?
That was great , Thanks . Watching you set it up on the radio also helps so much .
I have really come to like my AT10 radio . It is so user friendly compared to other radios I have now and had in the past . And so far I haven't gone even close to the range limit . I've only been about 600 yards and the first signal bar was just starting to blink in and out so I'm guessing it should work great 1 to maybe 1.5 miles if your up at 400 feet . and not blocked by a lot of trees . Watching your videos helped me to decide on the AT10 Thanks .
Now Radiolink needs a receiver that can use all the switches and knobs . I have everything on the NAZA M Lite working perfect and still have only used 3 switched and one knob . Using the Storm 32 3 axes gimbal , think I will take the knob off the Naza and operate the gimbal from only the receiver . Don't know if you can use signals from both receiver and Naza at the same time on the gimbal . Anyway thanks I have learned a lot from your videos their great and fun to watch , and really like the way you explain things in easy to understand instructions , because I'm always afraid I'm going to smoke something , and you know how it is once you let the smoke out , the magic is gone .
Have a great day .
Spencer
Olá amigo tudo bem. Obrigado pelo video. Se vc pode me ajudar estou com um probleminha com minha STORM 32 pois não estou conseguindo controlar meu PITCH, Roll e YAW. Pois eu estou estou ligando GND da placa no negativo do receptor e RC0 na saída de sinal do canal 4, RC1 na saída de sinal do canal 5 e RC2 na saída de sinal 6. Porém eu não estou tendo resultado de controle do gimbal. Meu gimbal está calibrado pronto pra uso mas estou com esse problema de controle. VOCE PODE ME AJUDA?
please make a review on the radio transmiter you r using
Hi! Great video, thanks for showing your results! I want to ask you one doubt I have, do you know how to calibrate the orientation of the gimbal?
I can't get it to look straight ahead. THANKS
Hi There, Very Nice project. I have just finished building an S550 Hexacopter with 2 axis gimbal similar to yours. I have a video transmitter hooked up to the frame to transmit video from the 2 onboard cameras. What kind of frame are you flying. I am using radiolink At9s transmitter R12ds receiver and APM 2.8 flight controller.
Hello budy, how are you. Thanks for the video. If you can help me, I have a little problem with my STORM 32 because I can't control my PITCH, Roll and YAW. Because I am connecting GND of the board to the negative of the receiver and RC0 to the signal output of channel 4, RC1 to the signal output of channel 5 and RC2 to the signal output 6. However, I am not having a result of gimbal control. My gimbal is calibrated ready to use but I have this control problem. CAN YOU HELP ME?
Hi, can I use this camera for real time surveillance?
Thanks for good videos. Question, how do u set return to home on your receiver. I've built a hexacopter,first ever for me. Need lots of help.
Do you have instructions on connecting the gimbal via Radiolink Sbus and Pixhawk? Also, could you provide close-up images of installation?
Can you show a picture of the battery rail and how it is mounted please ?
There is no battery rail, I just balance the battery between the mounting rails at the bottom and use velcro straps and elastic bands to keep it in place.
+Riaan Roux ok thank you for your time
Hello, very useful video, since I am planning to connect it with AT9 which is pretty similar. Do you know how to connect to Naza Light this Gimbal. DJI recommends to connect to F1 and F2 channels in Naza. I am a bit confused with that.
Do you have instructions on connecting the gimbal via Radiolink Sbus and Pixhawk?
Hi, I bought the same Gimbal seeing your Video, is it okae to connect this Gimbal to my 6s 16,000 Mah 25C Lipo ? Please Reply.
And make a video to show how you make the upgrade in the tarot690s ?
I will put up a video
+Riaan Roux thank you
hi mate got my strom32 gimbal but getting shuddering in the video not jello thinking that it was from the quadcopter so tryed it in my hand still the same would that be down to pid
How i can use the gimbal whitout hexacopter , i want to put the gimbal on a stick with powerbank i think ? Its possible ?
You're Amazing! Thank you very much, this video helped me alot. Thank you again:)
i was wondering if you get the NT or I2C based imu board for the camera. Could you check that out for me maybe?
Hi, did you plug the ground into channel 7 with the pitch control.
thanks so much!! A long time ago I was looking for something like this!! what are the specifications of your drone? frame , ESC, brushes and motor? thanks for your videos!
How much payload it can liftup?
i am use pixhawk controller so how i connect gimble
and gimble is spine right and left is possible
Interesting, I would like to see this thing work.
+GodfatherDeejay Here is the flight test: th-cam.com/video/ddQzAXxrBjk/w-d-xo.html
how i control navigation light on drone from the transmitter
Sorry, no longer own this setup and cannot experiment to tell you.
how to camera connect to mobile by FPV
hi mate what pin but you use on the gimbal for the tilt
Hi. See at 7:56 in the video I show the connections. Rc-0 control Pitch (or tilt if you prefer) and Rc-1 controls the roll (left-right tilt)
Did you end up tuning the pids on the gimbal?
Yes, the default PIDs were not ideal for my setup
Riaan Roux Would you consider showing up how you tune it?
I suggest you start here where the tuning system is explained. My gimbal has broken so I am waiting for replacement before I can do a tutorial.:
www.olliw.eu/storm32bgc-wiki/Tuning_Recipe
Thank You!
Hello sir
Can u pls give me your gimble for the trial in my quadcopter
Pls sir I want to complete my project by adding a gimble on my project
Chutiya bhikari
👍 ✌
fly this gimbal
+עומרי בנימין Check the flight test here: th-cam.com/video/ddQzAXxrBjk/w-d-xo.html