What's that thing at the back with which u r controlling? Can't this gimbal be controlled by syma x8g remote? What do we need to contol gimbal while it's flying?
I bought this gimbal and I would like to put it on the front of my drone (so the electronic card on the side) but when initializing the nacelle does not arrive and hangs.
hi i have a diy copter with a 3axis STORM32 gimbal in one moment the software o323BGCTool reports "IMU not available" (camera sensor) my question: mai i replace the IMU with this one: GY-521 MPU-6050 Module 3 Axis analog gyro sensors+ 3 Axis Accelerometer Module
I have an X 380, and a Storm 3 axis gimbal. How in the world do you connect to the Transmitter to do all the functions of the gimbal-- where do you hook up the wires from the gimbal-- the x 380 only has 1 motion sensor.
I bought this nacelle and I would want to put it in front of my drone, thus storm32 in vertical. When I connect storm32 it does not manage to calibrate. How may I solve this problem?
Do you know the link that point the Gearbest in your review is not the same in your review. They don't ship Storm board and etc. only the Gimbal. Was that the situation when you ordered from them or they changed something on the sale?
SJ400 would fit nicely... But its pretty bad/low quality. I have the 720 p one and its garbage. A Rough landing will make the entire video reset. But ... It is light enough to be strapped to a small syma x 5 . Heres a video of the SJ400 counterfit HD CAM. This one is about 2 years old. I bought that for 80 dollars online... This year I bought a go pro hero 3+ on craigslist for only 100... I recommend that !
hi bro i had buy this gimbal n got today when i trying to connet gimbal shaking very much pls help me i m using sj5000+ with 7.4 8c battery i m not geting with worrng i m doing
Is it possible to use this gimbal without an RC? Some of the low-cost 2-axis gimbals allow you to press a button and set the camera position which is then held and stabilized..
What's that thing at the back with which u r controlling?
Can't this gimbal be controlled by syma x8g remote? What do we need to contol gimbal while it's flying?
I bought this gimbal and I would like to put it on the front of my drone (so the electronic card on the side) but when initializing the nacelle does not arrive and hangs.
🔴🔴🔴🔴will u get the pan and tilt remote with the gimbal plzz tell fast 🔴🔴🔴🔴
hi,
i have a dji naza lite. Can you explain me pls how to conect this gimbal (roll axis) to the controller ?
thank you very much
Jakob
What is the weight of gimbal. I cant see clearly
Thanks for this review! Would you say, one could mount 2x GoPro Session side by side onto the mounting bar?
exkeks i test it with two runcam 2 cameras, but no worked :(
Can I use this gimbal for APM 2.8 ?
hi
i have a diy copter with a 3axis STORM32 gimbal
in one moment the software o323BGCTool reports "IMU not available" (camera sensor)
my question:
mai i replace the IMU with this one:
GY-521 MPU-6050 Module 3 Axis analog gyro sensors+ 3 Axis Accelerometer Module
I have an X 380, and a Storm 3 axis gimbal. How in the world do you connect to the Transmitter to do all the functions of the gimbal-- where do you hook up the wires from the gimbal-- the x 380 only has 1 motion sensor.
+Bud Jones You can control only 1 axis with the X380!
what is that thing at the back with wich you are controlling?
I was wondering that too.
This is a micro servo test tool. Saw it on Gearbest.
I bought this nacelle and I would want to put it in front of my drone, thus storm32 in vertical. When I connect storm32 it does not manage to calibrate. How may I solve this problem?
Do you know the link that point the Gearbest in your review is not the same in your review. They don't ship Storm board and etc. only the Gimbal. Was that the situation when you ordered from them or they changed something on the sale?
do you receive it without a controller board??
I decided to order a different type. But there are many complains where they did not send it.
i wonder can this be mounted on an mjx bugs3 without modding the mounting plate?
whats the best go pro knock of that will fit the strap perfectly....... nice review ................. *DEREK*
SJ400 would fit nicely... But its pretty bad/low quality. I have the 720 p one and its garbage. A Rough landing will make the entire video reset. But ... It is light enough to be strapped to a small syma x 5 . Heres a video of the SJ400 counterfit HD CAM. This one is about 2 years old. I bought that for 80 dollars online... This year I bought a go pro hero 3+ on craigslist for only 100... I recommend that !
Sjcam sj8 is kinda good. For sure worth trying. Pro version can go up to 4k 60fps like gopro
DO you use a separate battery pack for the gimbal ?
hi mate what pin do you use for thr pitch control
did you have any issued of interference with the X380 while using this gimbal? Did you have to modify the X380 in any way?
I don't had any issue.
hi i am interested in buying this gimbal for my xk x380,can you show me the set up of the cables that you did on your xk x380?thanx!!!
Can i use the gimbal without the drone
Yes
@@FirstQuadcopter Do you know if the position can be changed by hand like handheld gimbals or it's just by pitch yaw roll ports on the board?
@@Modelero Theres quite a few videos showing people using this as a diy handheld gimbal.
Can these run off 2S?
How to get yaw to stop swaying with the quad?
Hello my friend, can I use this gmail on naza v2?
How can i
Regarding this gambling is not a good training .... Unfortunately.
how to put it into phantom 3 standard???
You can't i think. The PH3 is just perfect with its own gimbal
@@FirstQuadcopter it can! th-cam.com/video/ooQvFkhy-Ug/w-d-xo.html this is what we should be solve
hi bro i had buy this gimbal n got today when i trying to connet
gimbal shaking very much
pls help me
i m using sj5000+
with 7.4 8c battery
i m not geting with worrng i m doing
Will this gimbal work with apm 2.6?
Can i use 3.7v or 7.4v power
2s at least
@@FirstQuadcopter have u tried the 3.7v plugin it on gimbal before?did t work?
@@stuffandthings586 no. As i remember it requires at least 5v
Is it possible to use this gimbal without an RC? Some of the low-cost 2-axis gimbals allow you to press a button and set the camera position which is then held and stabilized..
Top video buddy. Nice one
what batery is that?
7.4v 2000mAh, from my Syma X8W
Price?
plzz tell
85:20:17
Cool music :)
wtf is this music lol??? This a dark souls playthrough or what xD
You are allowed to talk
wth buddy...nice video but you have allot of people asking you the same questions and you are ignoring them all....don't be a jerk.
3DWHIZZ which is the same question?
Where did you get the remote controller for the gimbal? Answer that and you'll have made allot of friends!
(sorry for being abrasive)