Thank you- The video was helpful- it's funny how people complain when you take time to provide some information... now that's dumb! Many products provide NOTHING.
Our Deck-O-Foam was installed as a joint backing material to control sealant depth and provide proper joint configuration. You can learn more about Deck-O-Foam here: www.wrmeadows.com/deck-o-foam-expansion-joint-filler/
For vertical applications, we recommend our Deck-O-Seal One Step product. Click here for the data sheet: www.wrmeadows.com/deck-o-seal-one-step-polysulfide-sealing-compound/
Eduardo Preciado we always use the stick that comes with and mix for about 10 mins always works out fine I have done a few of my pools mastics and they hold up fine
The can opener system is stupid. I get that you want to keep it air tight, but very few conctractors carry a can opener with them. That will cause down time.
This video shows the foam backer rod inserted after the expensive sealant is mixed. THAT IS STUPID, very very stupid. You should have your backer rod inserted before you mix the sealant. Remember, after you spend nearly an eternity mixing the expensive sealant (ten minutes), you have less than an hour to use all of it. Hopefully, you are not working in hot sun during summer, where your working time would only be 30-45minutes.
Thank you- The video was helpful- it's funny how people complain when you take time to provide some information... now that's dumb! Many products provide NOTHING.
What was that gray thing ?
What were you stuffing into the crack before applying the product? Is that necessary? I would imagine you'd use less deckoseal with doing that.
Our Deck-O-Foam was installed as a joint backing material to control sealant depth and provide proper joint configuration. You can learn more about Deck-O-Foam here: www.wrmeadows.com/deck-o-foam-expansion-joint-filler/
How do I apply to the expansion joint vertically on a step?
For vertical applications, we recommend our Deck-O-Seal One Step product. Click here for the data sheet: www.wrmeadows.com/deck-o-seal-one-step-polysulfide-sealing-compound/
By drill and mixed for 10 minuts! Dont use foam use silica sand number 20 or 30
Eduardo Preciado we always use the stick that comes with and mix for about 10 mins always works out fine I have done a few of my pools mastics and they hold up fine
The can opener system is stupid. I get that you want to keep it air tight, but very few conctractors carry a can opener with them. That will cause down time.
first !!!
last!
This video shows the foam backer rod inserted after the expensive sealant is mixed. THAT IS STUPID, very very stupid.
You should have your backer rod inserted before you mix the sealant.
Remember, after you spend nearly an eternity mixing the expensive sealant (ten minutes), you have less than an hour to use all of it.
Hopefully, you are not working in hot sun during summer, where your working time would only be 30-45minutes.