Waterproof Plywood Deck - Liquid Rubber - Polyurethane Deck Coating Video
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2019
- Purchase the product - shopliquidrubber.com/products...
Waterproof your Deck with Liquid Rubber Polyurethane Deck Coating This is an easy DIY project that will save you time and money. No need to hire expensive contractors when you can do the project yourself.
Steps:
1. Ensure a clean, dry surface
2. Prep joints, seams....
3. Apply/paint Liquid Rubber Multi-Purpose Primer
4. Apply/paint Liquid Rubber Polyurethane Deck Coating
5. Shout from the mountain tops when you complete your project.
Liquid Rubber has great technical support if you have any questions about your project or the products.
#LiquidRubber #Waterproof #Sealant #HomeRestoration
Please take advantage of our top rated customer support:
Liquid Rubber
1-855-592-1049
shopliquidrubber.com
Support@shopliquidrubber.com
Other uses:
Concrete Patio
Pool Deck
Enclosed Trailers
Deck Boards
Fences
Laundry Room Floors
Basement Floors
_ _ _ _ _
Social Media:
- Facebook: / liquidrubberca
- Twitter: / liquidrubber_ca
- Pinterest: / liquidrubber
We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in offering 5 Star Customer Support to help complete your project. We believe in Free Shipping direct to your door, no running all over the place.
We were established in the early 2000's and provide a wide range of water based, VOC and solvent free products. These products cure to provide a seamless, fully adhered flexible membrane which prevents water ingress and resists damage from water, UV, salt, thermal cycling and harmful chemicals. Available for Commercial, Industrial and Residential markets.
Products are manufactured in North America with distribution offices globally. - แนวปฏิบัติและการใช้ชีวิต
Stoked it is a Canadian made product. Gives me the confidence that it's built to handle the elements as well. The fact that you have responded to every one of these comments gives me even more confidence in your product. Can't wait to try it out on my deck!
Sounds great. Please let us know if you have any questions as you work through your project.
@@LiquidrubberCa I'm already done and just as I assumed your product is great. I had to seal in a front porch that goes over my basement. It's now gone through a very wet west coast canadian winter and still looks as good as the day I put it on. Thanks for making a great product, I will definitely recommend it to people.
@@camb565 That's fantastic, happy to hear everything worked out.
Great vid! I like where it started so you can apply it however!
Thanks for the kind words. Please let us know if we can help with anything along the way.
Love this product!
Thanks for the kind words!!!
Great video my friend, very informative, thank you very much for sharing, keep safe
Thanks for the kind words. Please let us know if we can help with anything along the way.
Can I use this for wooden dome house exterior water proofing,?
Best
Hello and thank you for uploading this informative video. I am looking into using Liquid Rubber on a 5,000 sq ft. plywood patio deck. We fixed the plywood on multiple 2x6x12 wood boards with screws every 4 inches. There is a significant amount of screws. I noticed in your video that you only filled the plywood seams and not the dents from the screws. As such, is it not required to use wood filler nor the Geo-Textile on the plywood dents made from the screws? I would greatly appreciate your response. Thank you!
Hi, Any imperfections such as screw holes, knots and splits should be prefilled with a water-based wood filler and for plywood decks we recommend reinforcing the seams with our Geo-Textile Fabric. Most coatings fail due to the fact that these areas, if left un-repaired, can allow water to get in and potentially blister the coating. The first step in any coating process is to repair the surface. Please feel free to reach out to Technical Support if you'd like to walk through your project. Technical@LiquidRubber.ca or 1-855-592-1049.
Can this product be used on wooden floors to seal before applying a self levelling concrete?? Many thanks for the answer in advance.
Hi, you can use the Liquid Rubber Foundation Sealant to Waterproof before applying concrete on top. Please see here for more info - liquidrubber.ca/collections/all/products/foundation-sealant
Thank you for providing this demo. Can you use this to treat the floor boards of an open utility/atv trailer? Is it durable enough to drive wheelers, etc on? Thanks
Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating on an open trailer. The nice part is if the coating does get damaged along the way, you can always touch it up. If you want to walk through your project with Liquid Rubber Technical Support, email is Support@ShopLiquidRubber.com or 1-855-592-1049. You can also view more info here - shopliquidrubber.com/products/decks-and-balconies-sealing
@@LiquidrubberCa Thank you!
Where can I buy the stuff pls🙏
Should I use the 3 foot wide clothto create a continues membrane and does the sun brake it down and is it uv fade resistant?
Hi, yes you can use a wider cloth if desired. The Liquid Rubber Polyurethane Deck Coating is UV stable. It can always be touched up down the road if needed.
I want to gloss and see the woods details is there anything that see though?
Hi, sorry but Liquid Rubber does not offer a solution at this time.
Would this product work on a LockDry aluminum powder coated deck? In Canada my LockDry deck failed due to thermal expansion of freezing ice in the seepage channels. So I want to coat the entire deck to prevent the use of those channels to drain water. Can you advise please? 🙏
Hi, there might be a combination of caulking and coating that works. It's best to talk with Liquid Rubber Technical Support to walk through your project. 1-855-592-1049 or Technical@LiquidRubber.ca
What did you do on the sides of the deck so it looks finished? Flashing only? Liquid rubber over the flashing down to drip ledge?
Hi, on this project a flashing was used to wrap from the horizontal on to the vertical. The Flashing was rough sanded and wiped before applying the Liquid Rubber Polyurethane Deck System over. Liquid Rubber has great support to walk through your application if needed. 1-855-592-1049 or Technical@LiquidRubber.ca
@@LiquidrubberCa thank you for your reply. We are considering liquid rubber on our new deck and gathering as much info as possible! Your video was excellent in giving us an idea on how to do this method. Thanks again.
How easy to clean is this surface? I'd like to use it on my balcony. With the current paint I need to scrub the dirt out with a brush. Thanks
Hi, the Liquid Rubber Polyurethane Deck Coating can be cleaned like any other surface. Use a quality cleaner if needed or power wash.
What about OSB floor? Can it be directly applied over an OSB subfloor/floor?
Yes, you can use the Liquid Rubber Polyurethane Deck Coating over OSB. You can wall through your project with Liquid Rubber Technical Support as well. Technical@LiquidRubber.ca 1-855-592-1049
Can this product be used for covering the top joist for decks? Will I need a primer too or just the paint? How long does it typically last?
Hi, for protecting the top of deck joists, typically the Liquid Rubber Foundation Sealant is used. It's expected to last the life of your deck.
❤❤❤❤
😁
How does this hold up in changing conditions. Can be close to -40c in winter and sits around mid 30c all summer. Looking to redo a large deck.
Sounds like you might be in Canada. These products were developed in Canada to meet these needs. It might be best to walk through your project with Liquid Rubber Technical Support to answer any questions. 1-855-592-1049 or technical@liquidrubber.ca
How about the adhesion to the existing epoxy coating?
Hi, I'm not sure what you're asking. It might be best to speak with Liquid Rubber Technical Support (Technical@liquidrubber.ca) 1-855-592-1049
Can this be used in cold climates ie snow load? Can it be shovelled when cured ie snow shovelled off of deck?
Hi, yes the product can be used in cold climates. It's manufactured and used extensively in Canada. When shoveling the membrane, it's recommended to use a plastic shovel.
is there any way to apply it so you dont see the seams and the geo-textile? because the edges dont look that nice.
Hi, it's pretty tough to hide the seams entirely as it's important to bridge the seams with Liquid Rubber Geo-Textile. It's similar to a vinyl sheet deck application that has seams as well.
@@LiquidrubberCa yeah but with vinyl you can router the plywood where the seams land so they sit flush. I just wonder if there would be a way maybe build up the liquid rubber so it's not there. What about using the seam filler on the edges to make it flat?
@@cm-ex8nb It's tough to build up that much coating. It would be best to router, sand the wood down creating a little valley along the seams to reduce the height.
If you don't want to see those seams, you have to countersink the flashing by routing/planing the edges by the thickness of the flashing, and then using an unbroken sheet of geo textile cloth across the entire deck.
What I did was for your first coat (or 2 depending) you only apply to the wood and not over the geo-tex or flashing. This allows a height build up to help hide it. Worked out very well for me.
Could Liquid Rubber be used to water-proof second-story deck made from TimberTech (like Trex, but another company) and Dexerdry waterproofing splines between the boards? The dexerdry was not installed correctly so the deck leaks. Or, do I first need to recover the TimberTeck with new plywood before I apply the Liquid Rubber?
Hi, sorry to hear about the issues. You wouldn't want to go directly over your TimberTech and Dexerdry. Too many unknowns and potential for issues down the road. Your best bet would be to re-sheet and start fresh. Please touch base with Liquid Rubber Tech Support and they can walk you through the whole process. 1-855-592-1049 or Support@ShopLiquidRubber.com
Can I install ceramic tiles on the roof deck?
Hi, if you would like to install tile over the Waterproof Membrane, you can use the Liquid Rubber Foundation Sealant to Waterproof first. Please see here for more info - liquidrubberusa.com/collections/all/products/foundation-sealant
Hi I'm looking to get your product for sealing deck rails. What's recommended with a clear coat? Can I stain and then use over it?
Hi, it might be best to walk through your project with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049
I am thinking of using this product on a new 3/4” ACX pontoon deck. My only reservation is that I don’t like how at all the taped areas show through as a raised bump. Is there a way to make it look seamless at the joints? Any ideas out there?
Hi, wood filler or caulking can be used as well. It might be best to walk through your application with Liquid Rubber Technical Support. Technical@LiquidRubber.ca. Or 1-855-592-1049
Mmm
Would this work on an aluminum surface if prepped properly?
Hi, yes, the Liquid Rubber Polyurethane Deck Coating will work with Aluminum if prepared properly. It's best to reach out to Liquid Rubber USA support to walk through your project so you have all the proper info. Technical@LiquidRubber.ca or 1-855-592-1049.
How it will perform on a outside deck near marine applications? (Salt water), At the end "Avoid hot intense sunlight", on the install or for the lifespan of the surfaces?. Thanks.
Hi, the Liquid Rubber Polyurethane Deck Coating performs really well with Salt Water. Avoiding hot intense sun is for application to prevent flash curing. If you'd like, Liquid Rubber Tech Support can walk through your project with you. 1-855-592-1049 or Support@ShopLiquidRubber.com. shopliquidrubber.com/products/decks-and-balconies-sealing
Do you think this would stand up to active foot traffic like basketball or even ball hockey?
Hi, it's a very durable coating. It will wear over time but the good part is you can just clean and re-coat.
I just installed the deck floor with Plywood, there are many little holes (inperfect surface) on the plywood surface, what kind of material I need to fill the holes before apply the Liquid Rubber? They don't used the galvanize nails, so the nails will be rusted after I apply the Liquid Rubber?
Use wood filler
Could you use particle board laid down over an existing deck (already solid foundation - most boards good but want a flare surface)?
Hi, yes you can use particle board. You'll want to rough up the surface before starting your application.
@@LiquidrubberCa awesome! Would I need to seal the entire piece of wood? Bottom and sides... to prevent warping since particle board does tend to warp
@@kurtiscommerce1092 Yes, if you have moisture that will infiltrate the substrate, you'll need to protect it.
@@LiquidrubberCa awesome! Thank you!
Yes,osb works,but use rough side up for optimal adhesion.
How would I prep a deck if it is rough plywood. It does not have a smooth surface with aged plywood cracking.
Hi, if your plywood is cracking, it's most likely not suitable for a coating. The plywood may continue to crack and damage the coating. Generally it's best to re-sheet and start fresh.
I am building a wooden pool can I use this to seal plywood for submerging in water?
Hi, sorry but Liquid Rubber does not have a product for swimming pools at this time.
Hey Luke, I used it on my plywood submarine...it works fine. I'm letting the Mother In Law borrow it this weekend to see the Marianas Trench.
I'm putting down a new plywood deck/roof on my 25 foot rv. What product would be best suited for a liquid rubber roof if any?
Hi, you'll want to use the Liquid Rubber RV Roof Coating. The application is a little different since you're starting fresh from plywood. ie. Coverage is different, Bridging joints with the 3 course method (Geo-Textile). It's best to talk with Technical Support to give you the full application steps and coverage. Support@ShopLiquidRubber.com or 1-855-592-1049
Hello, can i have the name of the glue that you are using in joined tape? And also the brand name of liquid rubber polyurethane
Hi, the 3 course method is being used to apply the Geo-Textile with Liquid Rubber Multi-Purpose Primer. This reinforces the joints and seams. Then the Liquid Rubber Polyurethane Deck Coating is applied on top. You can view more info on this page - shopliquidrubber.com/products/decks-and-balconies-sealing
When the product eventually wears out, can it be patched? Or how do you repair it. I will assume it will have to be done again in 5 years due to the beach and sun where we live. Any info you can provide would be grateful. This seems to be the most easy waterproofing system I've seen.
Hi, the Liquid Rubber Polyurethane Deck Coating can always be touched up if it gets damaged along the way. When it's coming to the end of its life, you'll clean and apply new Liquid Rubber Polyurethane Deck Coating.
@@LiquidrubberCa Thanks for the reply. So I don't need to some how remove all the material and start completely over? I can reapply entirely?
And shouldn't the flashing be screwed down to avoid a nail that works it's way up as the deck flexes and moves over time?
Hi, yes you can apply entirely over the clean surface. Threaded nails or screws work well.
@@LiquidrubberCa thank you!
I just built an OSB foundation for my shed. Can this be used on OSB boards ?
Hi, if the foundation is going to be underground, use the Liquid Rubber Foundation Sealant to waterproof it and then use the Liquid Rubber Polyurethane Deck Coating for above ground application. You may want to walk through your application with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049
I need a product i can put on my plywood deck that is already coated with Safety Deck product. Would this work or does it need to be put on clean uncoated plywood? Thanks for the help.
Hi, it's best to talk through your project with Liquid Rubber Technical Support about the previous coating on the plywood. Technical@LiquidRubber.ca or 1-855-592-1049
Why is a compatible caulking if I need to drill a post through??
Hi, you can use a good quality exterior Polyurethane Caulking around posts.
Hello great video. My idea is to replace the cloth gazebo top with plywood and use the this product over top of the plyboard. Will this survive all 4 seasons, and for how long?
Hi, if this project will act as a roof, you'd want to look at using the Liquid Rubber Color Waterproof Sealant. liquidrubberusa.com/pages/torch-down-mod-bit-roofs. If you'd like to speak with Technical Support to walk through products, coverage, application... they can be emailed at Technical@LiquidRubber.ca or 1-855-592-1049
@@LiquidrubberCa thanks. Whats the difference between this product and regular liquid rubber. UV protection?
@@cameranmanner4701 The Liquid Rubber Polyurethane Deck Coating is a harder finish with lower flexibility designed for foot traffic (ie. deck). The Liquid Rubber Waterproof Sealant and Liquid Rubber Color Waterproof Sealant have more flexibility and are designed for roofs. They're also a lower price point.
would this be good for a skate ramp?
Hi, I'm assuming you want to protect plywood from the elements. Yes, the Liquid Rubber Polyurethane Deck Coating will work for this use. It may be best to talk through your project with Liquid Rubber Technical Support first to get the best advice. 855-592-1049 - techncial@liquidrubber.ca
We just framed the deck. Is this an alternative to vinyl and can it with stand the pressure of sleepers that have 5/4"×6 cedar 12' . Also can this be applied to existing torch on ?
Hi, I'm not exactly sure what you're entire project is. Sounds like you may be building a deck over a roof perhaps. It would be best to walk through your whole project to give you the best possible guidance. Please touch base with Liquid Rubber Tech Support. 1-855-592-1049 or Support@ShopLiquidRubber.com
What was the results of this answer? I have the exact same question
looks like a great product , could it be used on my inclosed trailer floor its a 3/4 plywood floor
Hi, yes you can definitely use the Liquid Rubber Polyurethane Deck Coating on an inclosed trailer.
Will this product work on OSB?
Hi, yes you can apply the Liquid Rubber Polyurethane Deck Coating system on OSB. Please see here for more info - liquidrubber.ca/pages/decks-and-docks-polyurethane-coating
Will this work on a deck with Duradek vinyl decking?
Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating over Duradek. Please refer to the Liquid Rubber Deck Project Page and Application Guideline - shopliquidrubber.com/products/decks-and-balconies-sealing. Liquid Rubber Technical Support can walk you through your project as well. 1-855-592-1049 or Support@ShopLiquidRubber.com
Is this meant as a deck you can walk on, or a demo of a roof surface?
Can I cover a fiberglass / vinyl deck that might be leaking a bit with this?
Hi, this is a video example of a walking deck. Yes you can apply the Liquid Rubber Polyurethane Deck Coating to a vinyl deck. Follow the same process as the Plywood deck but rough up the surface first.
Follow up three years later. This worked fantastic, and not a drip since.
Can this product be used on galvanized flashing?
Hi, yes it can. Just rough up the surface with some low grit sandpaper. ie. 80 grit
Can I use this products in snow covered decks during winter months in Wisconsin?
Hi, yes the Liquid Rubber Polyurethane Deck Coating can be used in climates with snow and cold. The product is developed in Canada. It's recommended to use a plastic shovel so you don't gouge the coating. The good part is you can always touch up if it does get damaged.
Can I use this item on UV finished  birch veneer plywood on the balcony outside?
@@MK-de8wi Yes, give it a rough sand to promote adhesion first.
How long does this late? I live in Southern Ontario. I have an uncovered cantilevered balcony and the plywood needs to be waterproofed to prevent the joists from rotting.
The only alternative to this that I see is vinyl decking.
It rains a lot here. And of course freeze thaw cycles every year. Do you recommend this product?
Hi, there's a 3 year warranty on the deck application. Generally you can expect 5+ years before touching up. You can see more info here - shopliquidrubber.com/products/decks-and-balconies-sealing. If it might help, Liquid Rubber Product & Application Support can walk through your project with you to answer any questions. 1-855-592-1049 or Support@ShopLiquidRubber.com
I’ve got this on an existing deck already. But it’s bubbling and peeking in a low spot where water sits. Can I put salt leveling concrete on top and then re-coat the concrete?
Hi, we haven't tested this between coats. Assuming it is a wood deck...The best way to level a deck is by repairing the framework itself. If that cannot be done, then you can use an exterior rated self levelling compound directly to the deck (wood or concrete) itself. I would recommend speaking with the levelling compound manufacturer to ensure it will bond well to our acrylic/polyurethane formulation (a bonding agent may be recommended). The risk is the levelling compound is not bonded to our coating and ends up floating between layers (eventually penetrating via movement of a sharp edge). Also, when reapplying our Polyurethane over top of the levelling compound, they should reapply at full coverage rate. Applying too thin may again result in blistering. (and make sure the levelling compound is fully cured prior to application.) Please reach out to us with any questions. 1-855-592-1049 or Support@ShopLiquidRubber.com
Hello,
is the shown "liquid rubber" plasticizer-resistant (e. g. no migration of carbon black from car tires / no permanent or irremovable yellowish markings like on PVC caused by multiple normal drive over)? How smooth it can be made (uneven surface causes trapping of contamination/dirt between the coating "hills" and time consuming cleaning)?
Thanks.
Hi, the Liquid Rubber Polyurethane Deck Coating is not meant for vehicle traffic. It's a medium traffic coating generally for foot traffic. We're working on a garage floor coating which should be available in 2021.
Can I install tile on this or will I have to buy the cement boards?
Hi, if you'd like to create a waterproof liner and install tile over, you'll want to use the Liquid Rubber Foundation Sealant. Please see here for more info - liquidrubberusa.com/pages/shower-liners.
If you like to install tile on it, you have to screw down cement board.
Hello, after applying the primer, i see that the person in this video is walking on top of primer. 1. Will that not be sticky to walk? 2. And walking on the tacky primer will ruin the primer? I have a a large 34x16 ft second storey flat roof balcony. Its too large to apply all at once. 3. how do you propose i divide the primer and coating into doable sections? Thank you.
Hi, the Liquid Rubber Multi-Purpose Primer is not sticky or tacky when dry/cured. You can walk on it while coating on top. You may be thinking of the Liquid Rubber EPDM & TPO Primer which is sticky when cured. For that one, you have to work in manageable sections so you don't have to walk on it. If you'd like Liquid Rubber Product & Application Support to walk through your project with you, please touch base at 1-855-592-1049 or Support@ShopLiquidRubber.com. You can see more info here as well - shopliquidrubber.com/products/decks-and-balconies-sealing
Just wondering if the liquid rubber can be applied on top of old plywoods?
Hi, yes the Liquid Rubber Polyurethane Deck Coating can be applied on top of old plywood. Be sure to prep with Liquid Rubber Deck Cleaner first.
Is there a product like this that can be tiled over?
Hi, have a look at the Liquid Rubber Foundation Sealant. It provides a waterproof membrane and can be tiled over at a lower cost. This video is an example of using the Foundation Sealant as a waterproof membrane under a concrete patio - th-cam.com/video/SdfmltrYz1Y/w-d-xo.html. You can see the product on this page - shopliquidrubber.com/products/foundation-sealant?variant=42521006309630. Liquid Rubber Product & Application Support can walk through your project with you as well. 1-855-592-1049 or Support@ShopLiquidRubber.com
Can you use it on fibreglass ?
Why tf would you put it on fiberglass it’s already water proof
Can I use textured coating for all coatings?
Hi, you can use the Liquid Rubber Polyurethane Textured Deck Coating for all coats. You do not have to use both the Smooth and Textured. Depends on what profile you're looking for.
I didn’t see the non textured product in the video. Are there 2 separate products or just what roller is used to apply it?
Built an outdoor ramp 3 1/2 ft by 8ft. I'm worried Liquid rubber will be slick to walk up when wet. Any feed back will be appreciated
Hi, the Liquid Rubber Polyurethane Deck Coating comes in a Smooth & Textured Version for areas needing more grip. You can use just the Textured version with a Textured Roller to get a pretty aggressive finish. If you'd like to walk through your project with Liquid Rubber Product & Application Support, please give us a call at 1-855-592-1049 or email Support@ShopLiquidRubber.com. Here's the product page for your reference - shopliquidrubber.com/products/polyurethane-deck-coating
Could this be used over a concrete deck
Hi, yes you can apply the Liquid Rubber Polyurethane Deck Coating on Concrete. It's a similar application. You can see more info here - th-cam.com/video/umTmrRy3-60/w-d-xo.html
Hello, what color is the deck coating paint in this video please?
Hi, that is the Liquid Rubber Polyurethane Deck Coating - Misty Gray - shopliquidrubber.com/products/polyurethane-deck-coating?variant=42521006735614
How durable is this?... I would like to do exactly what is done in this video... plus set free floating pavers over it... probably with sand under the tiles...
Hi, the Liquid Rubber Polyurethane Deck Coating is very durable. We have a couple options that might work for your project to waterproof and then lay pavers over. It might be best to speak with Liquid Rubber Product & Application Support to walk through your project. 1-855-592-1049 or Support@ShopLiquidRubber.com
I am a beekeeper and need a waterproof surface on the floor to pressure wash once the honey has been extracted. Will this hold up to that? It's a plywood floor to start with. Thanks.
Hi, yes the Liquid Rubber Polyurethane Deck Coating stands up to pressure washing very well.
How fast would UV light perish the coating ?
Hi, depending on conditions the lifespan is expected to be 5 - 10 years before re-coating.
Is this product similar or same with FLEX SEAL?
Hi, the Liquid Rubber Polyurethane Deck Coating is not similar to Flex Seal. This is designed specifically to balance the hardness, durability and flexibility decks need.
Would it be possible to only use 4 coats of textured paint and not cover with the smooth?
Definitely. You can use just the Textured. The surface will be more coarse. You chat with Liquid Rubber Technical Support - Technical@LiquidRubber.ca or 1-855-592-1049
Where can I buy your products in Ontario? How much it cost for material per square foot please?
Hi, you can buy Liquid Rubber products through the Online Store at liquidrubber.ca/ which ships direct to your door and Free over $75. You can also choose a pickup option from Oakville, Ontario as well. Generally for the Liquid Rubber Polyurethane Deck Coating, final cost is approximately $1.50 per sq ft.
I have a question. if the surface is damaged by hot grease, can it be patched or do we need to redo the entire surface? Thank you!!
Hi, if the coating gets damaged, you can always clean up and patch the area.
@@LiquidrubberCa Thank you so much for the reply! We will try it this weekend after ordering the products of amazon.
@@imMsPear Sounds good. If you have any questions along the way, please let us know. Technical@LiquidRubber.ca or 1-855-592-1049
Can I use this on my boat
Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating on a boat. Feel free to reach out to Liquid Rubber Technical Support to chat about your project first.
yes
If the deck is painted, do we need to sand it before applying the primer?
Hi, you can coat over previous paint that is well adhered and rough sanded. Please see the application guideline here - shopliquidrubber.com/products/decks-and-balconies-sealing and reach out to Liquid Rubber Tech Support with any questions. Support@ShopLiquidRubber.com or 1-855-592-1049
Where can i get that metal
Hi, you can buy flashing at a local home improvement store.
Does this stand up to foot traffic
Hi, yes the Liquid Rubber Polyurethane Deck Coating stands up to foot traffic. There's a Smooth option and a Textured option if you're looking for a little more grip. Please see this page for more info - shopliquidrubber.com/products/decks-and-balconies-sealing. Liquid Rubber Product & Application Support can walk through your project with you if that might help. Support@ShopLiquidRubber.com or 1-855-592-1049.
So are you using exterior grade plywood or any plywood you wish?
Hi, you can use any quality Plywood.
3/4-inch 4x8-foot sheets marine plywood
@@Lanyappi 3/4-in marine plywood! Really? For the cost of marine plywood, one might as well just use composite wood decking planks!
Any
@@LiquidrubberCa can you use any plywood u want
Can I use this om bathroom floor
Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating on a bathroom floor. You can walk through your project with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049
Can you paint over it?
Hi, the Liquid Rubber Polyurethane Deck Coating comes in different colors and is not meant to be painted over.
Will Liquid Rubber adhere to epoxy paint?
Hi, there are a number of different Liquid Rubber Coatings and different applications to consider. For the best advice, please touch base with Liquid Rubber Technical Support to walk through your project. 1-855-592-1049 or Support@ShopLiquidRubber.com
Wondering if I could use this as the floor base for my pontoon boat, I want to pull the carpet up and put this down. Do you think it’s that waterproof on my pontoon boat?
Hi, yes you can use the Liquid Rubber Polyurethane Deck coating for your pontoon boat floor. liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating, liquidrubberusa.com/collections/all/products/polyurethane-deck-coating?variant=12135321829469
very good n neat job man .appreciate.will last long even in bad weather.from small island Mauritius.GOD bless
What is the all the materials used in this video?
Hi, you can find all the materials on this page - liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating. Liquid Rubber Technical Support is Technica@liquidrubber.ca
How’s it holding so far
Holding up really well
Is this wise to use on a plywood floor in my campervan ?
It's a great option to protect your floor from moisture, dirt and rot. It's easy to apply and wash out. Campers can take a lot of abuse and it's nice to have a level of protection.
@@LiquidrubberCa ok great. Thank you. I assume it's ok to walk on. Not too soft and bouncy
@@KaptainKastle For sure, it's a strong durable Coating. Not soft.
@@LiquidrubberCa thank you, I'm going to give it a go
Can I use it at boat flooring?
Hi, yes the Liquid Rubber Polyurethane Deck Coating has been used on wood boat floors.
@@rayschultz1663 is it available off the shelf in the USA?
Hi, just online at liquidrubberusa.com/ and Amazon currently.
how long will this last?
Hi, depending on conditions, the Liquid Rubber Polyurethane Deck Coating is expected to have a lifespan of 5 - 10 years before needing a re-coat.
Contact please ma play ka bbusiness karna chatahu
My dad (280 lbs) rolls around in a desk chair in his shed turned woodshop with plywood floors. Will this stand up to this kind of traffic?
Hi, no problem rolling on the floor. The Polyurethane Deck Coating is really strong and durable. You can see more info on this page and if you want, you can walk through your project with Liquid Rubber Product & Application Support. 1-855-592-1049 or Support@ShopLiquidRubber.com. shopliquidrubber.com/products/decks-and-balconies-sealing
@@LiquidrubberCa thank you for the response
@@suzabakingbaked7975 - You're so welcome. Please reach out with any questions along the way :)
Can i use this on mygarage floor
Hi, unfortunately Liquid Rubber does not have a solution for garage floors with vehicle traffic. The hot tires and twisting are really tough on a coating. You can look for some Epoxy versions as an option for garage floors. Generally the more robust options are applied specialized contractor as the prep (grinding) is very important.
@LiquidrubberCa I'm not using it as a car garage just a seating area as a living room so just foot traffic would that still be ok
@@moehamdan6785 Yes, you can use the Liquid Rubber Polyurethane Deck Coating. Essentially the application would be like a concrete patio or balcony since it's not having vehicle traffic. You can see more info on the Liquid Rubber Deck Project page found here - shopliquidrubber.com/products/decks-and-balconies-sealing. Liquid Rubber Technical Support can walk through your project with you as well. 1-855-592-1049 or Support@ShopLiquidRubber.com
I'm concerned this won't hold up to constant foot traffic on the main entrance to a home. I'm trying set up maintance free conditions for my daughter's home for when I'm gone. I'm looking for something that will last for the long haul. If it's a matter of just reapplying, that's ok but I can't see her tearing this up for a redo.
Hi, you can re-coat the Liquid Rubber Polyurethane Deck Coating if it gets worn or damaged. You may want to consider a composite type of decking perhaps for longevity.
Can you add title later to this surface?
Hi, I'm not sure if "title" is a typo? Did you mean Texture? You can add Texture at a later time but it's best to do coats in tandem for best adhesion.
@@LiquidrubberCa i think they meant tile
Hi, if you want to waterproof a surface and then tile over, you can use the Liquid Rubber Foundation Sealant. Please see here - liquidrubberusa.com/collections/all/products/foundation-sealant?variant=26026234051. Liquid Rubber has great technical support, application info and videos.
Is it hot to walk on in bare feet when the sun has been beating down on it?
Hi, the Liquid Rubber Polyurethane Deck Coating will feel like a regular paint for heat from the sun. If sun/heat is a major issue you can look at using the Liquid Rubber Cool Foot Deck Coating. This product reduces heat transfer to your foot by up to 30% over regular paint. You can see more info here - liquidrubberusa.com/collections/all/products/cool-foot-coating?variant=26026160323
So we are looking at $300 for the product plus the plywood sheets?
Hi, depending on the area you have to cover. The Liquid Rubber Polyurethane Deck Coating 5G pail is $299.95 USD and final coverage is approximately 200 sq ft.
Can I just paint it over to old paint??
Hi, if the existing paint is well adhered and clean, you can apply over.
Liquid Rubber thanks a lot! And is this only sold online???🙂🙏🏻🙏🏻🙏🏻
The best!!!!
can not use it on existing deck
Hi, if you have any questions about your deck and compatibility, Liquid Rubber Product & Application Support would be happy to walk through it with you. 1-855-592-1049 or email Support@ShopLiquidRubber.com.
How has this held up 30 months later?
It's performed really well. Very happy with the longevity.
@@LiquidrubberCa Any photos or video of this?
Expansion space is filled with wood filler?! Every plywood/OSB manufacture requirement is 1/8" expansion joints. I cannot risk not following the plywood manufacturers guidelines. Had liquid rubber researched this before making this video? What is the alternative? I saw other instructions elsewhere where only voids were filled, not expansion joints. Please clarify!
Please explain how t&g plywood works ? 😂😂
Hi, for existing plywood decks, generally voids and joints are filled with wood filler or Liquid Rubber Sealant & Adhesive. For new plywood to allow for the expansion joints, fill with Liquid Rubber Sealant & Adhesive. Perhaps it might be best to walk through your project directly with Liquid Rubber Product & Application Support so you have all the info needed. 1-855-592-1049 or Support@ShopLiquidRubber.com
@@user-eg8hb8xt3j Hi, T&G Plywood is "Tongue and Groove". Essentially on one side of the plywood you have an extension strip that slides into a slot on another piece of plywood. It's a locking/joining system to make the joints more solid and reduce movement. If you'd like to talk it through, please call Liquid Rubber Product & Application Support at 1-855-592-1049 or Support@ShopLiquidRubber.com
Wait.... it's supposed to be for decking but you should avoid hot, intense sunlight?
Hi, sorry for the confusion. It's during application of the coating that you should avoid hot, direct intense sunlight. What can happen is the coating can cure too fast and you'll get lines in your surface. Best to work in cooler times like the morning if it gets really hot out in the middle of the day. Please let us know if you have any questions. We can walk you though your product and application as well if wanted.
@@LiquidrubberCa Ohhhh... Thank you so much for the clarification! Building a new deck now and had a small panic attack. We get intense summer heat but just during curing makes sense. Thanks Again!
@@stephaniedormaier1189 - We do have another deck coating option as well that you may want to consider. It's the Liquid Rubber Cool Foot Deck Coating for areas that get extremely hot. It reduces the heat transfer from the deck to your foot. The Liquid Rubber Polyurethane Deck Coating does not have the "cooling" feature but is a more robust deck coating.
I clicked on your link and I feel mislead. The product says its not meant for walking on. 😒
Thanks for bringing this to our attention. I see the link goes to the wrong product. We'll get this fixed up. It should have gone to the Liquid Rubber Polyurethane Deck Coating. You can find the link here - shopliquidrubber.com/products/polyurethane-deck-coating. Sorry for the trouble and if you want, Liquid Rubber Product & Application Support can walk through your project with you. 1-855-592-1049 or Support@ShopLiquidRubber.com
Would liquid rubber survive salt water?
Hi, yes Liquid Rubber stands up great to salt water.
@@LiquidrubberCa how would it compare to red guard
@@davidvalens3337 The Liquid Rubber Foundation Sealant is comparable used as a waterproof membrane on showers. It's much more cost effective than Red Guard.
@@LiquidrubberCa what's the best website to buy this from?
@@davidvalens3337 For the US - liquidrubberusa.com/ and for Canada - liquidrubber.ca/
Hmm, Geo-textile, plus primer, plus liquid rubber, plus shipping, seems like we're talking about $3/sq ft which is pretty ridiculous to do by starting out with plywood instead of proper pressure treated deck planks.
You want ridiculous? I live in a condo complex where the balcony spec is 5x10 marine ply. Wish I had the option of deck planks. This product actually looks like a good option instead of the annual latex repaint.
lol your comment is ridiculous
Anyone ever use this on a plywood wall that faces direct rain ?
Hi, we have another product that might be the best solution for a plywood wall. Liquid Rubber Colored Waterproof Sealant. it may be best to walk through your project with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049
The text never stays up long enough at times.. it's annoying.
Sorry about the trouble, you can find a full application guideline here - liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating
The flash wording goes way to phuckin fast and its annoying AF! I'm only 2 minutes into the video and hafta keep going back rewinding to fully read the instructions. This is a big and important project and flashing directions for 0.6 seconds is not a good idea.
Hi, sorry to hear about the trouble. Full application instructions can be found on the website here - liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating
I hear you bud, I had to click the rewind then pause button several times🤷🏽♂️
The galvanized roofing nail edge with the tape looks like dog