I think it looks great..but..the lights need to fold back so itfits through a 7' carwash..or the bar needs to lower down..needs to be stainless or its going to rust
Todd Schultz and Kaysar yea for sure, it will fit into a 7’ garage door but it is way to close. I have nvr tried to use auto wash, just to big to try anymore...thnks!!
i have heard this, just havnt completed it yet. i am hoping that with the new rough country bar that goes with the truck then it will not anymore but we shall see! thanks!
yes, i just didnt know if i got the actual bar that goes with the rack, like if it would quite down due to more low profile. but i guess that wouldnt change the fact that wind will still go over top and probably stay the same haha
I have been looking for this roll bar but rc discontinued this particular one I was wondering if you still ha e the roll bar and if you are interested in selling it?
I’ve been wanting one, do you think it’ll work on an 03 Silverado? I know they say it won’t but could you measure the bed width of your truck? And the measurements of the holes the bracket goes into in the front corner
sorry, sold the truck awhile back...i would def go check out a truck on a dealer lot and measure after they close lol (the rack fit snug between the bed rails for mounting)...if it will fit correctly across the bed, then it could possibly work for ya!
jorden Damnn my only thought is that because there is a slight pin hole (idk why there is a pinhole) it is letting water inside and then while driving, it causes like a vacuum and pushing that dirty kinda rust water out. I need to fill that hole in with something and that will stop it
@@midwestbuilds did you mention rough country or contacted them about this situation because am planning to get one and it hard to me to return it back because am shipping it internationally, thank you for replying
jorden Damnn sorry no i did not. Rough country is awesome to work with, they are always improving things. I work with them a TON and almost this entire truck is rough country. So i wouldnt worry, im sure the One you purchase will be perfect! Thanks for asking!!
@@midwestbuilds thank man they look great on your truck. I've been looking for some roll bars and from all the ones I've seem I like this RB from RC the most. My truck is black as well so I like how it looks with the black RB.
i used the brackets that came with the light bar. i will link the video below i made that shows how i mounted it. skip to around 6:05 or so. thnks! th-cam.com/video/WjKnYo5P3LU/w-d-xo.html
![[TH] 2024 PMSL SEA W2D1 | Fall | ต่อเนื่อง ในสัปดาห์สอง](http://i.ytimg.com/vi/ElcO9uC_Dbk/mqdefault.jpg)
Just tilt the led bar down and it’ll stop the noise
I think it looks great..but..the lights need to fold back so itfits through a 7' carwash..or the bar needs to lower down..needs to be stainless or its going to rust
Todd Schultz and Kaysar yea for sure, it will fit into a 7’ garage door but it is way to close. I have nvr tried to use auto wash, just to big to try anymore...thnks!!
Soooooooo about the whistle go get door edge protectors an put on the back of the lightbar. And it’ll eliminate your whistle
i have heard this, just havnt completed it yet. i am hoping that with the new rough country bar that goes with the truck then it will not anymore but we shall see! thanks!
ratherbeflying it’s the light bar that is whistling 😗
yes, i just didnt know if i got the actual bar that goes with the rack, like if it would quite down due to more low profile. but i guess that wouldnt change the fact that wind will still go over top and probably stay the same haha
You wanna see rust? My wife's Wrangler RC front bumper all the way across
I have to remove it sandblast it and redoing it in bed liner
happens to everything with time i guess
@@midwestbuilds haha, yeah. 2 years of new England weather
I have been looking for this roll bar but rc discontinued this particular one I was wondering if you still ha e the roll bar and if you are interested in selling it?
I’ve been wanting one, do you think it’ll work on an 03 Silverado? I know they say it won’t but could you measure the bed width of your truck? And the measurements of the holes the bracket goes into in the front corner
sorry, sold the truck awhile back...i would def go check out a truck on a dealer lot and measure after they close lol (the rack fit snug between the bed rails for mounting)...if it will fit correctly across the bed, then it could possibly work for ya!
What’s the point of it, is it a fancy light bar holder? Without a rear window protector it’s 100% useless imo.
Haha, half the crap we put on these trucks is useless 😂 all for the looks i guess lol
@@midwestbuilds - well it does look good, haha 😉
👊🏼
Rust spots? Oh fuck that
no major rust issues, just had some water leaking down from the light bar i installed. it was an aftermarket bar so there thats what i get haha
how did it rust in that area ?!
jorden Damnn my only thought is that because there is a slight pin hole (idk why there is a pinhole) it is letting water inside and then while driving, it causes like a vacuum and pushing that dirty kinda rust water out. I need to fill that hole in with something and that will stop it
@@midwestbuilds did you mention rough country or contacted them about this situation because am planning to get one and it hard to me to return it back because am shipping it internationally, thank you for replying
jorden Damnn sorry no i did not. Rough country is awesome to work with, they are always improving things. I work with them a TON and almost this entire truck is rough country. So i wouldnt worry, im sure the One you purchase will be perfect! Thanks for asking!!
Well it is rough country, they arent exactly known for quality.
Will it be able to fit on a truck with a truck bed liner?
It should fit just fine. It was not a tight fit at all, the side’s bolt together so you can adjust a little.
@@midwestbuilds thank man they look great on your truck. I've been looking for some roll bars and from all the ones I've seem I like this RB from RC the most. My truck is black as well so I like how it looks with the black RB.
What brackets did you use to mount the light?
i used the brackets that came with the light bar. i will link the video below i made that shows how i mounted it. skip to around 6:05 or so. thnks!
th-cam.com/video/WjKnYo5P3LU/w-d-xo.html
Where did you buy it
ITZ_YoBoI_Tank i buy everything through rough country website or i use their ebay...no tax and fast shipping!!
Why didn’t you get the GM roll bar that comes on the newer trucks?
SuperKiller177 nvr planned on having one really, i got a good deal on truck and just found roll bar later. Thnks!
Will a four wheeler be able to fit between the sides
Pyr0250 1 yes it would...any size. It doesnt affect the width really
Ok awesome thanks man because i have a polaris ace 570
Pyr0250 1 awesome yea should be good. Really changes the look!
I bet it does
So what are sport bars for??
looks and light bars in my opinion! i really like that i can keep light bars off the actual truck, these have a ton of mounting options.
If you have dumb friends they can hang onto it in the back when you hit a mud hole
snipz113 love it😂
Horrible welds!!! Thin paint. What a piece of crap!!!
appreciate your opinion!!
Ugly AF
Dustin Fisk thnks for sharing!