Rough Country Black Series LED LIGHT BARS: '19 - '21 Silverado
ฝัง
- เผยแพร่เมื่อ 17 ม.ค. 2021
- 10 Lights on the front of your truck? Why NOT!?!
Grille (flush) Mount Integrated DUAL 10' LED LIGHTS. 2019, 2020, 2021 Silverado, Silverado Trail Boss, LT, LTZ & High Country.
Mahalos from the Lonestar Hawaiian Garage!
Professional Inquiries: LSHawaiian@gmail.com
Follow on Instagram @Lonestar_Hawaiian
NOW ON TIK TOK: @Lonestar_Hawaiian
Link to product: www.roughcountry.com/chevy-le...
You like my garage? Check out how I built it!
Garage Build Part 1 Clearance: • Building My DREAM GARA...
Garage Build Part 2 Walls: • Building My DREAM Gara...
Garage Build Part 3 Floor Prep: • Preparing GARAGE FLOOR...
Garage Build Part 4 Epoxy Floors: • Installing Epoxy [Poly...
Garage Build Part 5 Paint: • BEST PAINT for your GA...
Garage Build Part 6 Floor Boards: • Installing Waterproof ...
Garage Build Part 7 New Age Cabinets & Tool Box's: • NewAge Products Bold S...
Garage Build Part 8 LED Garage / Shop Lights: • BEST Garage / Shop Lig...
Garage Build Part 9 LED Garage Lighting Custom Setup: • Dream Garage Build Pt....
Aloha
#Silverado #RoughCountry #LightBar - ยานยนต์และพาหนะ
![NEEDED Addition to 2019 - 2022 Silverado - Trail Boss [Custom] AVS Aeroskin LightShield](http://i.ytimg.com/vi/DUF65WtL4UU/mqdefault.jpg)
This a great video...love how you showed the ups and downs about this process.
I will definitely be doing this to my Silverado very soon.
Thanks for doing this...look forward to your upcoming videos.
Love the way the integrate into the grill.
Looks great. Had these in my cart for awhile. I think I may have to do it now. Thanks for the diy
Thank you for actually showing what it looks like at night so many reviews don’t
Just picked up the GM upfitter aux switch kit. Gives a full harness and 5 switches along with a stock GM kicker panel that it mounts into below the steering wheel. Super clean and looks stock. Not bad for $250. Just ordered this kit and gonna use it for my ditch lights as well for the boss.
Love mine. They are stupid bright for the size they are. Glad to see you picked them up!
Bought some lights after I saw your video and installed them by myself just by watching your video, without reading any of instructions 😉 THANK YOU!!!!
I installed the same ones on my pickup! I measured liked 10 times to cut once and still took my time cutting it. They are amazing lights bro! You made a great choice! I cut that ugly push button to a blue toggle witch, which I mounted to the big square empty slots below the radio, lights up blue like the lights when lights on and double lights when I toggle the switch. Great addition man!💪🏻🤘🏻
Do you have a link for this switch?
The I dont destroy my stuff and Mike's clip added in had me laughing , perfect and great vid.
You should look at painting your calipers red, easy project and more content for the page! 👍👍👍
Just installed a lightbar on my 21 silverado . Was stumped on how to run the wire for the on/off , followed your video ... success
FINALLY!!!! I have been looking for a review on these!!!
oh man i FELT those "oh sh*t" moments...great vids keep 'em coming!
I had my first attempt to remove the grill today but I got really frustrated and I got scared that it was going to break from pulling too hard. But after seeing this I'll give it another try tomorrow, hopefully I'll make it work. Great video 👍
Were you able to take it out without breaking anything?
Yes I did. Just need a quick pull, I mounted the lights and everything but yeah pulling that out was definitely the hardest part.
@@carlosfigueroa7616 how long did the entire process take?
This is one of the best videos I have ever seen. Outstanding job. Thank you so much for such an incredible video. 👍
Looks good! I can’t seem to find it in me to cut my RST. Knowing me I’ll f*** something up🤣
Came across your site yesterday and you’re already one of my favorite auto TH-camrs! Great job!
I appreciate it! Welcome 🤙🏽
I’ve had mine installed on my ‘20 Trail Boss for about 4 months now, love the look. I used a remote controlled relay switch wired to power under the hood, took the remote and programmed the garage door opener switches to run the lights, no reason to try to run wires into the cab.
I love that idea. This is the second comment telling me to use a remote switch... how in the world did I not think of that? Mahalo!
Here’s the switch that I used, it came with a relay but I used the one with the light kit. Nice thing is that the connectors matched the ones with the kit relay so no ugly butt connectors and tape to be seen. I just put the remote in the console just in case I would ever need to reprogram the garage door opener.
www.amazon.com/gp/product/B01DOUV83K/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
How did you program the wireless remote to the garage opener button? i love the idea.
@@arturorios7741 just follow the instructions in the owners manual for programming a garage door opener
@@LonestarHawaiianhow'd you get the led in the switch to turn off?
Notorious Z!!! That is fire!!
Just installed these and the wide spotlights from RC. I have not been able to test in total darkness or in a decent dark location due to being in a city. I'm taking my boys camping this weekend and cannot wait to see what they really look like. Either way, I am happy with how they look on the truck now. Adds a good look to an already sexy truck.
Lights look great. Midnight Rider for the Camaro!
OmG Trail boss upgrades! PLEASE KEEP THEM COMIN!!!
Oh there is more coming! Thanks for the support!!
@@LonestarHawaiian Readylift SST +2🤙
Love mine. I had them on my F250, but now I literally just purchased the same midnight edition Silverado and want to install these same ones
Right on!
Great video. Nice to see you get frustrated for once. You make everything look so easy !
Man, I just removed my grill about 3 weeks back on 2021 Trail Boss, they are such a pain to remove. I was just about as frustrated as you were at first portion of the removal.
Awesome add on
I was so excited for these led’s when I first saw on ebay, then I saw your video and got more excited from your review specially when you said for aaages, I replied that section many times to see the difference when you switch them on but it was just few seconds so couldn’t tell and made my decision based on your words, so I ordered them and got them installed (without breaking the clips on the grill)😂, but when I first turned them on I got disappointed😔
It’s not what I thought or hoped, but in all they are good, the beam is almost circle ⭕️ , its very sideway and wide up to the sky, & because I was expecting so I bought the RC hood spot led’s too, and that’s made the smile on my face😁, its a good combination, but these alone wasn’t satisfying, was planning to get the adapter for the side mirrors but these works instead,
Don’t make me excited then break my heart 💔😂, remember I’m watching you👀
All the best bro…✌🏼😎
Yessah my Bradah buggah is cherreh love the build Hawaiian keep it up
Black Tie is definitely the way to go as far as names go
Nice DIY project Bro. keep up the good work!!!
I purchased the wireless key fob and you can turn on lights with no switch. It works great. You attach the controller where the switch wire connects. Awesome.
I purchased here...www.amazon.com/gp/aw/d/B01M1FBSIL?psc=1&ref=ppx_pop_mob_b_asin_title. Rough Country also sells one. Wherever you can find it in stock.
Just got mine installed. Looks great
I put my exterior LED bars on a 4 port remote switch mounted next to the battery and obviously the remote inside with me, no ugly switches or running anything through the firewall. You should check out the Pulsar LT module that just came out for this generation GM truck, auto start-stop disable, DFM disable, governor disable, etc. By far the best thing I've done to my 2020 Sierra Elevation so far.
hi, can you post a link to the 4 port remote switch?
That’s looks awesome
Zeus of course. Great video, looking forward to more!
Looks good bro!!
Looks badass
The truck just keeps looking meaner and meaner. It looks like it could be factory lights. Awesome video
I already got the spotlight and fog lights mod done to my truck. These light bars are next 😁
That moment that piece came out in slow mo and you just stared at it 😂😂
Wish this fit my 2008 chevy silverado :] had to speed comment before I watch the video. Know its a banger!!
I think you can retro-fit it with the separate brackets/hardware that is included. I don't believe the RC plates will work on the
08 grille
Looks good bro keep it up
cool upgrade... have to admit, the best part.....the kiddo with the shades
Right?!
I think Black-Tie would be the best name for the ZL1 as it is classy 😎 yet menacing. Love the vids, keep'm coming!
Looks amazing!!
Thanks for watching!
@@LonestarHawaiian Thanks for making the videos. Lol
Awesome!! Been wanting to get these lights for my trail boss so now I guess it’s time!! Also for the auto stop check out Autostop Eliminator. It’s a plug and play that plugs up behind the switch and keeps the switch off but still allows you to turn it back on when you want it. 🤙
I appreciate it! How difficult was it to get the that panel off?
@@LonestarHawaiian wasn’t terribly difficult. It was more nerve racking more than anything because of the thin plastic and metal clips. Truck Ownership: 101 has a good install video that helped a lot. Those nylon pry bars and tape help a lot though.
Love that garage
I appreciate it! Lots of work, but completely worth it.
Great video man.
I would personally leave that little light on the switch. It looks like you tapped into a fuse, what you could do, so that light isn’t always on, is tap into a different fuse that only has power when the vehicle is on. Then you won’t have any battery draw, and you won’t be able to accidentally forget that you have your lights on and kill your battery.
That's what I was thinking also, but I figured he must have thought about that already, with doing mods like this. 🤷♂️
How can I tap into a fuse I just wired up my led light bar and fog lamps that came with a rough country bumper but I have the red light on for the switches, definitely don’t wanna drain my battery
Ive been running that switch 2 years no problem, even in extreme canadian winters and even after leaving car off for days… i doubt that light draws enough to hurt battery
LOVE YOUR CONTENT!
Big Z! It has sentiment. You and your kid named it. BIG Z BIG Z BIG Z!!!!
Good stuff bro !!
The black series drl are the best looking light bars! I have a 30" curved behind my grill an 20" in my bumper
Great video. I was lookin to do that to my 2020 rst. I don't have the lamps on the mirrors so I was looking to throw on the ditch lights as well.
FYI that light that stays on on the switch will never kill or drain the battery. i had one of the same and painted over the light and it was in my truck for 2 years with no issue. i agree they suck but worked just fine.
Looks really cool! 👍
Black Tie is the one... 😎
And change this oldschool looking turnsignal bulbs to led. Just sayin 😉
You need to find a switched 12v source, not a 12v constant, that way the light with only be on when the truck is on, all you done is kept power to the switch and removed the switch led ground, so it doesn’t light up red or green, still drains on the battery
There’s more lights than my taco truck , looks awesomely cool
Boost Auto Parts sells a wire tap for a 6 high mod. Have it on my 2007.5 GMC Sierra 2500HD. Fog lights stay on when high beams come on. Side note: if fog lights and high beams are off with this mod, by only turning high beams on, fog lights will also turn on as well.
I appreciate it! I'll take a look at the part!. This thing looks crazy.
You already have the high spot mod for the mirrors, so just cut that switch off and run the hot for the relay to one of the two wires going to the task lights on the mod. they will just come on with the high beams the same. This way you can also turn it on manually with the task light button. If the mod has diodes on both wires going to task lights you may need to remove them to work with the factory task switch, that will make it also so you only have to hit the task button once for both to come on and once for them to go off instead of once for left, once for right, and again for both and again to turn off.
Black Tie is perfect for the camaro.
Can’t wait to see more 07’ stuff! How bout that rough country grill upgrade for it too? I’ve been eying it for my white 07’ to go full “storm trooper” with some black wheels eventually too. Thanks for the entertainment and information!
I know I am late to the naming of the Camaro. But just for fun God “Z” lla. Great videos and information. I am currently waiting on my first ever new car to be delivered and I chose a Trail Boss. After watching several of your videos I can’t wait for it to get here at the end of September.
Right on! Congrats and great choice. Stoked for you 🤙🏽
Those look awesome. It would be very cool if you could control them with the high beams vs using a separate button.
You can with a relay, super easy
Should use the gm up-fitter aux switches plug and play from gm parts store. Plus it comes with 5 aux switches you could use for other stuff later on!!
I pulled my grill for the first time and it scared the ....... out of me, only broke one white clip. I need to buy some but have not looked for them. Cool install.
Looks awesome!
With the boost fog light mod do you know if you still have the option to turn them off?
And secondly, How are the 10" RC bars held in the bracket? I was thinking of buying the brackets and some rigid SR 10" bars.
The night marcher would go sick with the channel.
You will always be the bell of the ball with a BLACK TIE that is suitable for all events...
Thank you for this!! RC needs to do better with their install instructions. I had the same frustrations with this install.
🔥🔥🔥🔥
You could name the Camaro "Cash" as in Johnny Cash, AKA the man in black.
5:47: *Plastic clip falls off = It was at this moment he realized he messed up! Lol 😂
LONESTAR HAWAIIAN that's ironic, because we call our 2020 LT Trail Boss Big Z. And ours also has the midnight package. But the biggest difference on our Trail Boss is that it has the 6.2L, and the tailpipe tips are powder coated black.
You are in Texas - Need to add Emergency Horns on it! I added (2) 2' Union Pacific's under the frame of truck and installed the tank and compressor in the back of the bed under my Retrax MX rolling compartment. Always fun to scare the sh!t out of people.
also - no Putco 60" led light bar on the tailgate?!
Appreciate some of the cool ideas you have given me thus far!
I would name the Camaro “Zorro”
Those damn things going to be outlawed
FantaZ as in Phantom Z or Fantasy Z. I had Fanta-Z made out of wood like 2x6 for my White 1980 Hugger Z-28 in the 80’s and would always get comments on it hanging from the mirror 👍
😂😂😂 I love "Fantaz" That's just epic.
So did you tap into the toggle switches under radio? I’m think of doing that but have no idea how to.
I have a 2019 LTZ I custom mounted 2-10" double row spot/flood light bars behind the grill in same location as rough country kit but are unseen unless lights are on turned out slick never seen another 😉 and while your adding light why no all on mod? High/low fogs and light bars light up quite well
We’re you able to tap into the stock switch panel? What button did you use for the fog lights?
My companies are all named Black Tie... The name just pops for people. And it looks like the car is dressed for a formal with the black bow tie. Go for it!
Right on!
@@LonestarHawaiian and I just bought the same truck, 2021 Trail Boss Black. Love it. Doing some of the same mods on mine and following your videos religiously.
Put a EXO wnich mount from rough country on it , Truck looks Awesome and the lights are badass , I'm definitely putting those on .
To fix your fog light issue you need to go into the computer in the truck and change a setting. Through the obd2 connection.
Yessah
Black Mamba!
I like those man. I think u should name ur car the "Z machine"
Very interested seeing how you wire in the light bar into the useless switches
Which wire did you cut from the switch to get ride of the green/red light and constant power?
I installed a Speed Turtle Engineering module in my Trail Boss since I am a volunteer EMT and sometimes respond from home. Anyway, that module came with a similar switch that lights red all of the time, whether the truck is on or off and then toggles green when the relay is engaged. I also don't get what the point is of having a red light on all of the time. It is annoying when I drive at night too.
Please let me know if it will work by changing out dead switches to from the high country or LTZ switch bar. That is the only reason I haven’t done this RC light mod, I didn’t like the cheap button sticking to my dash. Also, if you source a front camera option for parking and Off-Roading that will work with our factory Navi screen,
Also.....that tiny LED on the switch could be left on for well over a year without an engine start and never drain your battery!!! You could mount a toggle switch on the 110 accessory plate cover on the lower right of your switch panel.
There is a jump wire to make your fogs come on with whatever function you like, high or low beams (which is what I chose) or daytime running lights.
Also Def get the autostopstart bypass for that stupid auto stop feature!!! You'll be happy you did.
Thanks for the recommendations! I’ll look into it
Blackwidow for the ZL1? Looking good, surprised you didn't change to the lighted Bowtie while you had the grill out?
Are these like high beams bright or can you have them on with low beams? Like for oncoming cars are they so bright that you have to turn them off for oncoming traffic?
Youre better that streetspeed.... 👍🏼 200% to me 🤙🏼
Just different content 👌🏽. He does some great stuff on his channel
Am I the only one that noticed the GOAT in the back ground on the TV!!!! Adam Calhoun
you can have your fog light on with hi beams..there’s a mod you can do that costs like .10 you just have to add a diode between fuses, I’ll have to try to find the mod I think it’s on GM Trucks or something, I did it to my 2015 and you have to turn the dogs on first but after that they will stay on when switching from highs to lows
Where did you tap the power from for the lights? I have a similar harness and don’t want the power constant, want to have it tapped of of something that is only hot when the truck is running.
How did you resolve the ON/OFF switch light staying ON on the OFF position ? does it. I'm in the process of installing the RC light bar.
On the switch swap the blue wire with white and your welcome switch light will only come on when turned on
Black tie. Forget the rest.