I have legit been looking for this vid for years. Thank you for this because there are no other Jseries 6MT transmission rebuilds out there from what I have noticed.
@@hondagarageprojects4378 lol stuff like that happens all the time to me. Usually end up doing my videos 2-3 times cause of it lol. I was surprised when I couldn’t find a video Installing the gears and cuff from the manufacturers. Only reason I was even working on it.
@@hondagarageprojects4378 Something to consider is your weight or load on the gears. I asked being a few of our customers have ran them in their full weight 7th, 8th and 9th Gen Accords and TL's .. a few have broke 3rd with the RV6 gears and one broke 4th. Rich said he revised them and they are leaving them as is, but 3500-3900lbs is a lot different load than 2300-2800lbs
@@hondagarageprojects4378 we will probably get a set to throw into our spare trans with phantom grip lsd. I still prefer that lsd to the OEM TL I'm running now. The phantom grip went straight as an arrow, the OEM still has some torque steer
Ya I haven’t had any torque steer issues. I’m running the CL-s trans with the 6th gear cuff. I making 800+hp at 2500lbs. But I’m turning it up more soon so we will see if it holds
Very thorough. Wish I would have seen this before I replaced gear set in my CL-S trans. How are you liking the straight cut gears? Are they streetable?
Nice video, I just purchased the same setup from Sean for my TLS. Very useful information as I'm going try and do it myself for a first time. Clutch masters Stage 2 came in today. The stage 3 went extremely fast.
@@hondagarageprojects4378 I'm sure, I was told to get a Tilton, but this is for a suped up daily. So I went with a more streetable clutch, I hope anyway.
Do you happen to know if 07 manual transmission on an accord would work on 08 accord engine? Ive been trying to buy a transmission but all the ones for sale are from the previous generation.
Can I order the 1-6-R synchro? For my 05 Acura TL with a 6mt? When I looked at p2r page it says for Acura TLs but not the year…. i just want to make sure it’ll fit can someone confirm this for me please I really need to rebuild this trans so I can actually shift into my gears 🆘
Where can I get the syncros from i have my 3rd gear grinding and I have to double clutch at low or high rpms so it can slip in with no grinding or what do I need to do to fix that grinding?
are the gears the same between different J series transmissions? I need to rebuild my 6 speed manual for my J35y2. Where can I order the syncro and Gears 2 and 3?
So these gears are built to still use the syncros. Works perfectly for the race series I enter because of turbo size I have to have a syncro transmission
I have legit been looking for this vid for years. Thank you for this because there are no other Jseries 6MT transmission rebuilds out there from what I have noticed.
That was the whole reason I did this rebuild.
Thanks bro for the video going to start rebuilding minds tomorrow I've been looking everywhere for a video like this
No problem man. That was the whole reason of doing it. Just wish the video would’ve blown up more.
@@hondagarageprojects4378 it soon will this video will become legendary soon
Thanks bro. Much appreciated
this is so detailed! thank you!
It looks like it’s not that bad but thank you for all the info on how to repair it
It honestly wasn’t at all. Just gotta take your time
Very nice. I was working on a video exactly for this on my channel. Except my 4th gear is shot.
Nice. It was a complete pain in the ass haha. Ended up the cuff was upside down.
@@hondagarageprojects4378 lol stuff like that happens all the time to me. Usually end up doing my videos 2-3 times cause of it lol. I was surprised when I couldn’t find a video Installing the gears and cuff from the manufacturers. Only reason I was even working on it.
I know that’s exactly what I said. That’s why I made the video.
Yup, broke 3rd gear twice. Most people break 4th. We were talking with Rich at RV6 about using his straight cut gears. Let us know how they go 🤙
So far so good. Been 9.5 at 148 in the 1/4mile. 1.5 60s
@@hondagarageprojects4378 Something to consider is your weight or load on the gears. I asked being a few of our customers have ran them in their full weight 7th, 8th and 9th Gen Accords and TL's .. a few have broke 3rd with the RV6 gears and one broke 4th. Rich said he revised them and they are leaving them as is, but 3500-3900lbs is a lot different load than 2300-2800lbs
@@hondagarageprojects4378 we will probably get a set to throw into our spare trans with phantom grip lsd. I still prefer that lsd to the OEM TL I'm running now. The phantom grip went straight as an arrow, the OEM still has some torque steer
Ya I haven’t had any torque steer issues. I’m running the CL-s trans with the 6th gear cuff. I making 800+hp at 2500lbs. But I’m turning it up more soon so we will see if it holds
@@hondagarageprojects4378 Keep rocking brother, rooting for ya 🤙 Hoping to get my gutted 7th Gen below 2600lbs but will take some work Lol
Very thorough. Wish I would have seen this before I replaced gear set in my CL-S trans. How are you liking the straight cut gears? Are they streetable?
I haven’t driven them for a daily but it only wines when it’s in deceleration. Also it shifts just like it was stock gears. Nice and smooth
Nice video, I just purchased the same setup from Sean for my TLS. Very useful information as I'm going try and do it myself for a first time. Clutch masters Stage 2 came in today. The stage 3 went extremely fast.
I’m using a twin disk. Makes the work of difference
@@hondagarageprojects4378 I'm sure, I was told to get a Tilton, but this is for a suped up daily. So I went with a more streetable clutch, I hope anyway.
@@unknownbikes5178 that makes sense. This twin definitely isn’t very streetable
From what compagnie did you buy allé thé new stuff to rebuilt that i would like do thé same
@@thierryvergeylen3805 I got everything from P2R
Just curious about there syncro kit how are they for a daily or are they mainly for track use
I’ve never used them to daily but they are very smooth so I don’t think they would be bad.
Do you happen to know if 07 manual transmission on an accord would work on 08 accord engine? Ive been trying to buy a transmission but all the ones for sale are from the previous generation.
I couldn’t tell you only trans I use is from the 03 cl-s
Can I order the 1-6-R synchro? For my 05 Acura TL with a 6mt? When I looked at p2r page it says for Acura TLs but not the year…. i just want to make sure it’ll fit can someone confirm this for me please I really need to rebuild this trans so I can actually shift into my gears 🆘
Just message them. Find P2R on FB and shoot Sean a message. He is the owner of P2R. Had always hooked me up and gives out great information
Where can I get the syncros from i have my 3rd gear grinding and I have to double clutch at low or high rpms so it can slip in with no grinding or what do I need to do to fix that grinding?
Hit up P2R. They have all the parts. Might be shift selector also
I'm on the same boat. My 05 is doing the same.
What Acura Transmission with or without LSD fit on my car direct bolt on?
are the gears the same between different J series transmissions? I need to rebuild my 6 speed manual for my J35y2. Where can I order the syncro and Gears 2 and 3?
I got everything from P2R
@@hondagarageprojects4378 damn. I don't see anything for second gear on their site
Where can I get transmission parts ? I have J3a4 6 speed my 5th gear won’t go into gear and my 4th grinds
From P2R
3rd and 4th gear straight gears still require synchro?
So these gears are built to still use the syncros. Works perfectly for the race series I enter because of turbo size I have to have a syncro transmission
Masty
🤣🤣
honda power🦾🦾🦾
Yes sir!!!