CityBug Decat Manifold Fitting Guide + Tested / Catalyst Replacement Installation (C1/TAygo/107)
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Fitted a Piper performance de-cat exhaust manifold to the Shitroen.
The process is pretty much the same as replacing the catalytic converter, so this informative instructional video could also help as a catalyst replacement tutorial 🤔
Piper manifold vs stock/decat
That stripped M10 bolt into an M8 nut using an M9 tap & die is genius 😊 Thanks.
You’re very welcome ☺️
😅
🤣
Just Thank you for what you do it's always entertaining, long live the shitroen
Thanks mate, that’s good to hear.
Over 20 minutes and not one "fanimold"? Unsubscribed and reported
To busy with dead royalty.
He didn’t even refer to the Lambada Sensor 🙁
Well his name IS StupidBloke
Sorry. I’ll do better next time.
@@StupidBlokeStupidVideos nah… you do better than anyone else anyway 😊
Stupid Bloke Stupid Videos: 'Molesting the citybug so you don't have to.'
I should change my channel description to that.
@@StupidBlokeStupidVideos DO IT!
😂
They aren’t road legal I wouldn’t fit one as they cause pollution. I don’t have kids so there isn’t their health to worry about. I told my insurance in the eighties I’d put different manifolds and a straight through silencer and a bigger carb on my Austin Mini they said it won’t make any difference- it was about 4 miles an faster at top speed than the standard one I overtook eventually 😂😂😂😂. On a disused airfield of course where I later nearly caught a non genuine police car at 105 miles an hour in the same Q plated Mini😂😂😂😂
I do have a kid, but fuck it I fitted one 🤷
My 107 has no subframes on or doors or bonnet or seats. If the doc considers me fit to drive it might be one out come if not it will be a different one and I’ll need a clown suit to satisfy the locals who take the P cos they think I’m nuts. But as a lightweight (possible!) who will be the clown?
I took the doors fully off this in one of my early vids 😂
Very jealous that yours isn’t leaking I haven’t been able to find a way to stop my piper manifold from leaking at the flange currently got 2 gaskets and a sealant all around it and it’s still leaking
Did you see how I sealed it? The gasket needed spacing off to seal on the shitter
@@StupidBlokeStupidVideos yeah I’ve got a custom exhaust with a wider centre pipe so I don’t even have one like that in mine
@@ShaunBourke ohhhhh, just weld a short flex to the shitter then 🤷♀️
Don’t you just wish that when you’re fitting a wheel they’d used studs so you could align the wheel without having to support its weight. I wouldn’t want to fit a massive wheel to a very large vehicle with bolts!!!!
Most are ok with the centre bore lined up but some are awkward
Hello your videos are great can you tell us where to buy all the parts and where to find a reinforced clutch. Thanks
@@schmittalain thanks mate. I got the manifold from a lad on the CityBug club on facebook. It’s a really good group full of helpful people. As for clutch, not sure about reenforced but I fitted a Blueprint one which are usually decent.
@@StupidBlokeStupidVideos Thanks
When is this shitter getting a turbo/supercharger 😂..
Great video Kenneth.
I’ve actually got a ghetto supercharger setup ordered, but it might be a while before I get round to fitting it 🤔
@StupidBlokeStupidVideos Yes ! Cant wait ..Will you be doing it in 2 parts ? Maybe a good idea for more views 🤔 👀
I’m interested to know what sorta mpg your getting after all the mods?
About 37mpg all round town, but I could get more if I didn’t have big dumb heavy feet. Before any mods I used to get about 43 on the same journeys.
When you going to fit a supercharger kit?
Maybe one day, finding the time that’s the issue
Watching a video of some guys doing it just now... looks like the kit costs £1575
Go on,think of the viewers lol
If this can give me more mpg, I'd give it a try. Thanks for sharing.
👍
After a couple of weeks living with it, the mpg seems to have dropped by about 3 😞
@@StupidBlokeStupidVideos shouldn't make much difference because at 1000-2000 RPM, even at full throttle, you're only creating 1/6-1/3 of the gas at 6000 RPM. Maybe gave a few extra hosses though
Love the steam train sound effects 😂
🤣
Nice one. I'm thinking of getting a piper manifold as well for the Aygo. But now you mentioned hollowing out the stock cat, that might actually be a good idea and save a few quid. To pass the local MOT I'll just get a universal sport cat and install it somewhere in the middle
I’ll just put a cat back on for MOT. Now it’s been off it should be easy to do even without taking the bumper off
Just to demonstrate my far superior knowledge, the ring end of the 22mm spanner WILL fit over the connector plug of the lambda sensor so you don’t slip off using the open ended side and batter your knuckles
It does, I think I got it through first time I removed it when I spunked oven cleaner into the cat to clean it
One question,iam not sure but have you already remove the catalyst from inside of the manifold ( the old one ) before you take it out to put the new one? If yes did you see any difference in performance? Thank you for your nice videos even with one hand!!👋
Hi mate, yes the cat I removed was already hollowed out. The difference after fitting the Piper wasn’t that much to be honest, a bit more power higher up the rev range but is actually a little bit worse at lower revs and seems to use a little bit more fuel as a result. It’s also a bit louder/more raspy than before.
Did it go through the MOT ok without a Cat?
@@davidlaw899 nope, every year I have to refit a catalyst to get the shitter through test. Tbh it’s not worth the hassle
Will it fail the MoT?
Unfortunately yes, I’ll have to swap a cat back onto the shitter when the time comes
Enjoyed this, SBSV! Idea for a future project: I decided I want to paint my current shitter C1 and have been watching about 18 thousand YT vids on painting cars with rattle cans. Some turn out like a polished pig and some pretty shockingly good. So there you have it! First a bit Karate Kid ("Sand'a car, Daniel-San") to roughen the clear coat for adhesion, and then you don't even need primer if you use an enamal paint (like Rustoleum) or a nice matt acrylic (like Autotek). PS.. Bright yellow is said to be the best colour for rattle cans - can barely see imperfections and naturally blends between section. I'm going matt black though. Go for it..... I dare ya!
Cheers mate. I’m shit at bodywork but the sill on the other c1 actually turned out way better than I could have ever expected. If you’re painting onto paint you just need to scotch the surface. Matt black is one of the easiest colours not to show imperfections too as there’s no shine to reflect off them, where as gloss black is probably the worst for it lol. Good luck.
Nothing like a greased up flange. YES!
YES!
I bought a new one it was just described as performance - I should have sent it back it didn’t say it wasn’t road legal.
I had to swap mine back at MOT time 🤦
@StupidBlokeStupidVideos silly question mate, but any idea what size the bolts are? It seems the 4 manifold bolts are 12mm? What about the cat? Are they 12s as well? Im just trying to get all the tools organised before i whip the bumper off. Thanks mate
Ah shit I can’t remember tbh. The bolts that go into the bottom of the cat usually knacker up and rust away tbh so may be worth getting a pair of new ones and new springs if possible
@@StupidBlokeStupidVideos ahh, thanks for the reply anyway. I've got all new bolts and springs in the post, and the bumper should be coming off tomorrow, So I'll find out what size they are tomorrow anyway. Loving the content by the way. Just got myself a 107 and been binge watching your vids. Great stuff 👍
Great video! 👍🏻 I think we get the pole position in front of Max Verstappen next F1 race with this C1 😉 He will just take a look from behind the whole race 😂 😂
Unfortunately I’m banned from racing in formula 1 using this C1 as I’d have such an unfair advantage 😔
Love your videos 👍
Thanks!
The more important part is your tool upgrade, someone's being f#£^&d by the Strap-On man! Haha 😄
Used to be a weekly basis for many years, but dwindled over time and not so much recently… it’s sort of like being married.
Ever thought about messing with an HDI C1? Tweaked about a bit probably a lot quicker than the petrol.
Is love one.
How do you run your C1 on reserve?! As soon as mine hits 2 bars I have to fill it up 😂
I always run it down to reserve as it’s my marker to work out mpg lol
You need a remap to get the most out of the manifold, at least an extra 15 BHP will be unleashed.
It’s already been mapped to suit this manifold before I fitted it.
th-cam.com/video/nvKyjWuBxC4/w-d-xo.html
Good idea m8, but haven't you broken many emissions laws by getting rid of the catalysator?
Probably just about all of them.
@@StupidBlokeStupidVideosshit on ! 😂
I was going to get one of them piper decat manifolds don't think I will bother now lol.outstanding video though keep the good work up.
Cheers mate. The difference isn’t huge but is there, it’s mainly at higher revs. It’s been on a couple of weeks now and actually feels slightly more flat at low revs and seems to use a little more fuel too. The sound is definitely better though, it does make it louder which I didn’t really want but the note is better.
Quality vid, very interesting and I'm guessing still no engine malfunction light ?
Thanks mate and nah, it’s still staying off 🤞
how about a yaris gearbox conversion with lower final drive
I’d consider it maybe one day
17:20 definately better if youv'e got a nice tight flange.😜
Aaaaaalways.
Cracking video esp the end lol 😆 👍👍
Thanks mate!
Grazie per questi fantastici video! Ma dove hai trovato il collettore di scarico della Aygo? Io ho la seconda versione ciao e grazie.
L'ho preso da qualcuno che lo vendeva su facebook, ma sono disponibili su ebay, e grazie!
Grazie a te!
It seems a little bit faster at the end comparison - and you had more fuel on board, so I reckon it's made a difference. Pretty slight though, hey?
Yea I’d say you’re bang on. It is slightly quicker, but as a downside it also seems to have lost a tiny bit of grunt at low revs. It seems to have moved the torque curve higher up the rev range a tiny bit.
@@StupidBlokeStupidVideos maybe a higher top speed now! 😁
@@chrisyboy219you can hit 105 on the speedo in stock form and not going down hill either.
Kepp up good work great vids love it
Thanks mate!
Hi Tim, what do you do when its MOT time? Will it pass with that on?
Hi mate. It won’t pass with a decat unfortunately. Last MOT I had to borrow a scrap catalyst and refit for the test. Pain in the dick tbh, but only took 10 mins to fit as all the bolts were free due to being off recently.
I’m replacing mine at the moment for my MOT next week, pretty easy, and your video really helped
@@TheYeminator glad it helped! Thanks for watching, and don’t forget to have a look through my other vids 🤣
Have you had an MOT with this setup yet ? or the gutted cat setup ?
Nah, I couldn’t get anyone to MOT it with a Decat unfortunately. Seems that the DVSA are a lot more strict on it than they used to be
OK, so how did you get it MOT'd ?@@StupidBlokeStupidVideos
@@StechaReal it was a ball ache. I had to borrow a catalyst and fit it temporarily to get emissions readings.
150km/h in 3rd? Dang man
The gears ok these are loooooong for a little shitter. They’re about the same ratio of my old Volvo V70 T5 I used to have!
What next turbocharger or supercharger in c1?
The TTS Centrifugal Supercharger kit doesn't seem to be for sale anymore BUT ChargerTech now sell a Roots Supercharger system and doesn't have an intercooler like the TTS and is clearly a cheaper to product...plenty to upgrade atleast.
If I get chance it’s something I’d like to do, but obviously nothing but the best. £200 Chineese supercharger ftw
3 of a kind TUUUUNE
Banger 🤟
soon this beast will be 1000 bhp
Over 9000.
@@StupidBlokeStupidVideos 😂😂😂
Forgot how long geared these cars are, been awhile since I've owned a 107, but that's a good pull in 3rd. Mine was model with a rev counter, can't remember what the redline is, but for a 5 speeder you were near top speed in just that one gear. I never used to rev mine out like that, so the mighty 1ltr bug impresses me more.
They’re just major powerhouses 😂