The reason its walnut media blasting is that if any get into the cylinder they get burned off thus causing no harm to the engine , just some extra carbon
I have been casually passing by the garage and overheard the phone call with customer: We have discovered the source of the issue in your vehicle. You won't believe, but there were walnuts in the combustion chamber! Sir, have you ever parked under a walnut tree or have an ongoing squirrel infestation? 😂
I did an engine oil flush on a jeep Comanche I bought used back in the 90s it was running good no noise but had a lot of sluge. Well it cloggeed the new oil filter so fast and I guess the bypass valve didn't work . anyway it spun a rod bearing . So I never flushed another engine after that 🤣 But it could have just been a Jeep thing🤔
@MrNiceGuy94 Great video. I have been going through all of them. I can't unblock the hose with chemicals and a copper wire and im certainly not confident to use a blow torch on it so how long does it take to replace the pipe? Thats where im currently at but seems like alot of aggrevation for 1 pipe.
Hi the correction values of my injector on idle are: 1. -0.057 2. 0.308 3. -0.267 4. 0.074 When i rev the car all the values go to zero. Shall i perform a injector reset? The dpf regenerates about every 42 miles. No fault code yet. Thanks
as I say it in the video, the customer didn't have the financial resources for it to be replaced this time, so this is what we agreed on. He will come back for replacement and for the strainer inspection as well.
Holly molly, why is this engine so neglected? Whats the cause of sludge? Broken injectors seals or just pure lazyness not to change oil every half a year and do thorough inspecion every couple years?
The fact you showed your mistakes say alot about how honest you guys are, good job getting it sorted 👍
You’re the master of Mazda , good job mate.
Wow, thanks! ;)
That gave the young heart a rumble I’d say 😂😂worked out ok in the end 😀
Good save there. Moral of the story , triple check lol
Well done,this is why i like your videos,honesty and integrity and you get the job done,tell Dan looking smug doesn't suit him😅😂
The reason its walnut media blasting is that if any get into the cylinder they get burned off thus causing no harm to the engine , just some extra carbon
Excellent, new learnings make you a mastercraftsman
Where are you based? I would love someone experienced with these engines to do an overhaul of my 6. Love the thorough checks and video explainations.
I have been casually passing by the garage and overheard the phone call with customer: We have discovered the source of the issue in your vehicle. You won't believe, but there were walnuts in the combustion chamber! Sir, have you ever parked under a walnut tree or have an ongoing squirrel infestation? 😂
Hello, how much does a complete carbon cleaning of the engine cost? I have a Mazda 6, 2014. 2.2 diesel.
Thank you.
Would have been nice to see what the valves looked like before the cleaning
Change your oil owners. Really isn't hard!
I thought my head was a mess when i carbon cleaned it, but that cam shaft and the level of build up is insane
I don't think this car had an oil change, ever. Some people should not be allowed to own cars.
I did an engine oil flush on a jeep Comanche I bought used back in the 90s it was running good no noise but had a lot of sluge. Well it cloggeed the new oil filter so fast and I guess the bypass valve didn't work . anyway it spun a rod bearing . So I never flushed another engine after that 🤣 But it could have just been a Jeep thing🤔
@MrNiceGuy94 Great video. I have been going through all of them. I can't unblock the hose with chemicals and a copper wire and im certainly not confident to use a blow torch on it so how long does it take to replace the pipe? Thats where im currently at but seems like alot of aggrevation for 1 pipe.
what about the walnut shells? some would have ended up in the oil system and then the bearings?
If any left in the cylinder they had been burnt by the combustion, but we did an oil flush and then an oil change on the car anyways.
Hi the correction values of my injector on idle are:
1. -0.057
2. 0.308
3. -0.267
4. 0.074
When i rev the car all the values go to zero. Shall i perform a injector reset? The dpf regenerates about every 42 miles. No fault code yet. Thanks
how many miles ??
If you say this car has a worn camshaft, why was it not replaced when the engine was in this state of disassembly?
as I say it in the video, the customer didn't have the financial resources for it to be replaced this time, so this is what we agreed on.
He will come back for replacement and for the strainer inspection as well.
🫢
Holly molly, why is this engine so neglected? Whats the cause of sludge? Broken injectors seals or just pure lazyness not to change oil every half a year and do thorough inspecion every couple years?
Laziness...100%.