The PlayGo Retro Handheld - OpenDingux Emulation Device

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 368

  • @muppetonmeds
    @muppetonmeds 4 ปีที่แล้ว +199

    Copyright in china means copy correctly.

    • @ncf1
      @ncf1 4 ปีที่แล้ว +5

      haha, brilliant!

    • @sebastianwardana1527
      @sebastianwardana1527 4 ปีที่แล้ว +3

      Or... the right to copy??? You know... how it says in the title... copyright... the right to copy...

    • @anggrilukman9645
      @anggrilukman9645 4 ปีที่แล้ว

      @@sebastianwardana1527 are you Indonesian? Wardana is common last name in Indonesia

    • @Stella-ri5ex
      @Stella-ri5ex 4 ปีที่แล้ว +1

      no copyright in China..that explains why those devices are coming out in China, instead in the West.

    • @YoshiIsCool1
      @YoshiIsCool1 4 ปีที่แล้ว

      Haha

  • @voteDC
    @voteDC 4 ปีที่แล้ว +37

    With the design of this series of handhelds I really wish they were powerful enough to run PSP games. The control layout and size would make them a great alternative to the aging real PSP hardware.

    • @Maurilustrador
      @Maurilustrador 4 ปีที่แล้ว +5

      They're capable thanks to hardware, but have problems because of the software. Not even the psp vita can run n64 well, so hopefully eventually emulators will be good enough to play the games :)

  • @adams213
    @adams213 4 ปีที่แล้ว +10

    I've been wanting something near the power of the rg350, but with a smaller profile so I could carry it in my pocket. This new screen sold me instantly, so in 15-30 days I'll be rocking this beauty. Thanks again Taki.

    • @chrisbradshaw6099
      @chrisbradshaw6099 4 ปีที่แล้ว

      same here

    • @Saul700
      @Saul700 4 ปีที่แล้ว

      Been looking for it on AliExpress but all the sellers sell it with one SD card, did you find a seller that sells it with the second SD card full of games?

    • @adams213
      @adams213 4 ปีที่แล้ว

      @@Saul700 no the one I bought just came with one that I actually wiped clean right away and used an updated firmware on. Wonderful unit btw, minus the terrible slider pad. Dpad is amazing so makes up for it

    • @Saul700
      @Saul700 4 ปีที่แล้ว

      @@adams213 I guess I'll order it with the one SD card since the other offer is out of stock. I'll make sure to copy the games they included before flashing the update. But where do I get the new firmware from?

    • @adams213
      @adams213 4 ปีที่แล้ว +1

      Saul yes flashing the main card will wipe anything on it, luckily it does have two slots so games are usually kept on slot 2 to help prevent that. I used the Rogue firmware 1.2 back during development due to it being the most stable at the time, I'm sure it's been upgraded since. You can find it here boards.dingoonity.org/ingenic-jz4760-devices/pocket-go-2-'rogue'-ofw/

  • @neojeets
    @neojeets 4 ปีที่แล้ว +5

    The black looks nice. They just sent out my new PocketGo preorder so I'm excited for that. They're also sending the SFC colored buttons as a bonus.

  • @diego25497
    @diego25497 4 ปีที่แล้ว +10

    I'm a simple man. I see Taki, I click. I'm so happy how fast you've been growing, keep up the good work m8!

  • @TriniChiniese
    @TriniChiniese 4 ปีที่แล้ว +2

    I would like to see this form factor with Retroid Pocket specs .or even RG 350 form factor with the specs of the Retroid Pocket and the dual TF cards . great video keep up the feed back to the makers.

  • @TheSerpentsEye
    @TheSerpentsEye 4 ปีที่แล้ว +3

    Merry Christmas Taki!

  • @djwrahfael
    @djwrahfael 4 ปีที่แล้ว +1

    I'm still waiting for my pocket go 2 to arrive but this color looks so much cooler though. Thanks for the video! ;)

  • @davidwhitney947
    @davidwhitney947 4 ปีที่แล้ว

    Hey man I’ve been enjoying your coverage and picked up an RG350p, waiting for it to come in the mail. Will keep watching and listening to your other coverage. Good content man

  • @yllib2012
    @yllib2012 4 ปีที่แล้ว

    Great news!!! I already ordered an Aluminum Alloy RG350 but after seeing this color combo and realizing it's another rendition of the Pocket Go V2, I ordered one. The deal maker for me was the color and the replaceable battery.

  • @andywoodburn4555
    @andywoodburn4555 ปีที่แล้ว

    Just ordered one of these off of Temu and it can't get here soon enough!! Of course I'm excited to play Game Boy, Nintendo, Super Nintendo and Sega again but my main excitement is PlayStation 1 emulation in the palm of my hand. Haven't played a great deal of those games in years so I'm looking forward to it. Tekken 3, Crash Bandicoot, Tony Hawk, Mortal Kombat Trilogy, and Twisted Metal to name a few. Great time killer before work, when the wife and my aunt are watching something on streaming, and at night before bed. 😁😁

  • @zockeromi1970
    @zockeromi1970 4 ปีที่แล้ว

    Thanks for showing Taki!

  • @AndrewAHayes
    @AndrewAHayes 4 ปีที่แล้ว +6

    One thing that grates on me regarding Chinese products is they label the flash memory as ROM, I think this probably started out as a mistake but because of the Chinese copying everything, the ROM label mistake became the default.

    • @PaulMillard1973
      @PaulMillard1973 4 ปีที่แล้ว

      Andrew Hayes. I think this depends on whether it has two flashcard slots. The primary holding the main OS and emulation software which can be upgraded or tweaked. The second slot holds user data and ROMs

    • @AndrewAHayes
      @AndrewAHayes 4 ปีที่แล้ว +1

      @@PaulMillard1973 Definitely not as they do it on phones and android tv boxes also

    • @EmergencyChannel
      @EmergencyChannel 4 ปีที่แล้ว

      What about the use of Transflash (TF) which is the name that SanDisk branded Micro SD cards before they were adopted as a universal format. How many people even know what TF stands for other than it just means Micro SD on Chinese products?

  • @WickedGamerCollector
    @WickedGamerCollector 4 ปีที่แล้ว +1

    Ok this is a really fun comparison ! :D

  • @500superrich
    @500superrich 4 ปีที่แล้ว

    Woah I almost grabbed a New Pocketgo because I thought they were the same. Thank you so much for saving me from making that mistake!

  • @jasongooden917
    @jasongooden917 4 ปีที่แล้ว +2

    Too much snow outside right now to go out and enjoy the rest of my day

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +2

      No snow here :[

    • @jasongooden917
      @jasongooden917 4 ปีที่แล้ว

      @@TakiUdon I live in Canada, it's to be expected :) especially in December

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      @@jasongooden917 I love Canada!

  • @WMARUoriginal
    @WMARUoriginal 4 ปีที่แล้ว +5

    Neat to see this but also kind of sucks because lots of folks like me have the PocketGo from retromimi enroute so it’s bittersweet

  • @neoely
    @neoely 4 ปีที่แล้ว +1

    Cool color temperature doesn't mean it's always good. Low color temperature emits more blue lights and can make eyes more tired easily though it looks clearer and brighter. This thing is mentioned many times on smartphones already so you should consider your preference.

  • @mamory3791
    @mamory3791 4 ปีที่แล้ว +3

    Just got it of the link you gave us, and i have to say i am so happy i didn't buy the pocketgo version.

  • @yllib2012
    @yllib2012 4 ปีที่แล้ว

    The PlayGo is my favorite handheld console to date. I know more and better handhelds will be coming in the future. This one has everything I want now at a fantastic price.

  • @potato8090
    @potato8090 4 ปีที่แล้ว +10

    so does that mean the pocketgo 2 we ordered from retromini based on your reviews is inferior to this version? or will it ship with the same ips (color temp) as this one here?
    we get punished for buying early?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      Only they would know. Like I said, it's entirely possible the board in this is going to be the only one that exists for any version of this product.

    • @notQwatwaffle
      @notQwatwaffle 4 ปีที่แล้ว +8

      I'm going to be really upset if I bought and have been waiting for an inferior product.

    • @Codescardbarn
      @Codescardbarn 4 ปีที่แล้ว +2

      notQwatwaffle I bought from retromimi and they never delivered my product and wouldn’t send another or issue me a refund. Their customer service was a joke and had to have paypal fix the issue. Never purchasing from them again

    • @notQwatwaffle
      @notQwatwaffle 4 ปีที่แล้ว +3

      @@Codescardbarn I've talked back and forth with their team so I'm sorry to hear that. The ship date wasn't originally supposed to be until the 20th of December so no one except reviewers have their hands on them. I just received word last night that production and testing has finally finished and the first wave are being shipped. I'm waiting for a reply regarding the hardware changes. I'll let you know what they say, if you still care.

    • @potato8090
      @potato8090 4 ปีที่แล้ว

      i'm also curious to know. its december 23, still dont have any shipping confirmation email myself (i ordered before thanksgiving).

  • @Mister-Christer
    @Mister-Christer 4 ปีที่แล้ว +1

    The sepefications look really good

  • @Klaus312
    @Klaus312 4 ปีที่แล้ว +4

    So should u rather get this instead of pocket go? I’m confused ..

  • @SpuddsBuckley
    @SpuddsBuckley 4 ปีที่แล้ว +11

    So odd that they would rebrand this as the “PlayGo” when the “PocketGo” brand is already well established.

    • @mrburns366
      @mrburns366 4 ปีที่แล้ว +5

      It's probably a totally different company. I'm sure these are all made by one factory and different vendors buy them under different brands. This happens a LOT. I have a TCL 4k TV that is identical to my dad's Sharp TV. Even the remotes are the same. They do they same with guitar. At one time all Korean made guitars were made by Samick. It didn't matter the brand Epiphone, Squire, Yamaha, Dean, Washburn, Ibanez, ESP.. etc. If it was made in Korea it was made in the Samick factory for those venders and branded accordingly.

    • @SpuddsBuckley
      @SpuddsBuckley 4 ปีที่แล้ว +2

      Nope, apparently same company here. They strangely just felt a need to rebrand it for the international release. ¯\_(ツ)_/¯

    • @TrueDreams
      @TrueDreams 4 ปีที่แล้ว +1

      @@SpuddsBuckley in case of law suits they could just shut down one and not both. If the playgo is international. That's what I think.

    • @mr.n476
      @mr.n476 4 ปีที่แล้ว

      @@mrburns366 i just knew about that guitar facts. Cool

  • @dark2deeds
    @dark2deeds 4 ปีที่แล้ว +4

    Looks nice but Iam waiting for my pocket go to arrive if only I new before looks so good in black

  • @PedroAugustoPereira
    @PedroAugustoPereira 4 ปีที่แล้ว +28

    Looks great, but this giant logo in the front just kill me...

    • @mrburns366
      @mrburns366 4 ปีที่แล้ว +6

      Electrical tape..? :-P

    • @phillystevesteak6982
      @phillystevesteak6982 4 ปีที่แล้ว +1

      Should have been on the back, I agree

    • @Malheirods
      @Malheirods 4 ปีที่แล้ว +3

      No logo looks cheap for some reason. Would love to have the option to put mine.

    • @bazahaza
      @bazahaza 4 ปีที่แล้ว

      Stickers

  • @FiftyFive74
    @FiftyFive74 4 ปีที่แล้ว

    Just ordered one. Already ordered PocketGo v2 couple days ago. Let's see which one arrives first. Might try using colored buttons on the Playgo

  • @pillowgood1318
    @pillowgood1318 4 ปีที่แล้ว +1

    I ordered one based off of your review. I went for this instead of a RG350, as I already own a twin stick GPD XD, and wanted a cheap n cheerful smaller size DPad device. My first impression is the game transfer software is unbelievably clunky, and the joystick feels very flimsy, cheap and imprecise. That said the D-pad is really good, as is the main body build quality. Not being able to turn of quickly with a button push is also more annoying than I realized. I like it, but I don't love it.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      What game transfer software?

    • @pillowgood1318
      @pillowgood1318 4 ปีที่แล้ว +1

      @@TakiUdon I just mean the application that it comes with where you load the games onto another sd card, then copy your roms over to the os sd card. But not before you format that card fat32, which of course Win 10 doesn't do. So now Im waiting for AOMEI app to format my my 128 GB card, so I can load the roms. But now it seems it doesn't like anything bigger than 32 GB. So now I'm deleting the partition and trying to make a new one. 30 min in and 15% done. Think I'll re-watch Aliens.

  • @Movie_Games
    @Movie_Games 4 ปีที่แล้ว +1

    So if I like the form factor of the new Pocket Go but prefer cool screens, I should get this instead?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      Exactly

  • @pepeafa
    @pepeafa 4 ปีที่แล้ว

    I love your channel Taki

  • @ryancoke777
    @ryancoke777 4 ปีที่แล้ว

    Just ordered one of these! I think the lack of a 2nd analog stick is worth the $20+ savings over an RG350

  • @FluxXxik
    @FluxXxik 4 ปีที่แล้ว +2

    Ok, this is much harder, GKD350h or this one, i really dig the black color but GDK350 looks smaller and its more powerfull.

  • @gamersview8
    @gamersview8 4 ปีที่แล้ว +4

    Hi taki, just want to know, does this and the new pocketgo retain the newly save state if power off with the power button without using the power off icon in the OS menu? Hope you can try it for me, thanks.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      We don't have hibernate in the software yet if that's what you're referring to

    • @gamersview8
      @gamersview8 4 ปีที่แล้ว +2

      @@TakiUdon No, not hibernation but shutdown to power off. The old pocket go does not power off properly when turn off with the off switch. I would lose my newly save state if I don't go back to console menu to click on the power off icon in software to power off. I wonder if this PlayGo or new PocketGo can retain newly save state when powering off by hardware without exiting the emulator app.
      I'm not sure if you understand what I'm referring to. I made video on TH-cam to show retromimi about this problem, they told me old pocketgo needs to power off in software to properly shutdown. And I see on the aliexpress link you have in description also stated to use console menu power off icon to power off. I wonder if that indicates if powering off physically would cause save state issue like the old pocketgo.
      So I wonder if you can help to test if it is indeed the case, because I play on these devices during breaks and when I'm called I never have enough time to power off in software, and powering off by the power button is quickest so I wonder if it's possible on this new version of pocketgo.

    • @PlsDontReadThis123
      @PlsDontReadThis123 4 ปีที่แล้ว

      @@gamersview8 this is an interesting thing to test. I am also interested

  • @arfink
    @arfink 4 ปีที่แล้ว +6

    Kinda frustrating that each revision is done as a rebrand. Because if they just iterated through the same brand, it would become clear that nobody would want the crappier early versions. I feel gypped because I'm getting the early white version with the dorky warm color screen, and it hasn't even arrived yet. I'm also a bit miffed that we had the "surprise" ugly stickers on the back. I'm hoping it'll be better in person when it finally arrives.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      Yeah, I had no idea ahead of time that they were going to do that stupid stuff with the stickers. As for the screen, I do think this is going to find its way on the PG2.

  • @gamerdude612
    @gamerdude612 3 ปีที่แล้ว

    I Wanted a Pocket Go 2 but being late to the party I missed Bittboy told me this model was discontinue but now I see the PlayGo version I will go with that I mean I have a RP2 and the RG350-351P&V I don't need it but I think it looks cool I started with the Pocket Go 1 and I have a obsession with these little emulators so why not lol.

  • @joeyvlo
    @joeyvlo 4 ปีที่แล้ว +1

    0:31 Sepefications! Lmao! Love it! 😁👍

  • @webHead604
    @webHead604 4 ปีที่แล้ว +1

    Has the d-pad issue that you experienced in the PocketGo prototype been rectified in this version?

  • @NonyaDamnbusiness
    @NonyaDamnbusiness 4 ปีที่แล้ว

    So what you're saying is that the PlayGo manufacturer ran out of the screens they were going to use and went another random screen instead that just so happens to be brighter/warmer.
    On the PlayGo PCB you can actually *see* some cold solder joints right there where the joystick is. The Chinese just haven't yet mastered the art of using flux I guess.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      No, the screens are exactly the same. They are programmed via the board to be cool or warm and they switched to cool in this board revision.

  • @carlosdyer1113
    @carlosdyer1113 4 ปีที่แล้ว

    Loved Full Throttle

  • @RupeeClock
    @RupeeClock 4 ปีที่แล้ว +5

    Now I'm worried that my New Pocket Go 2 console will arrive with a slightly warm IPS panel, dang.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +2

      You really only notice it when you have it next to another device of the exact same type

    • @fonarte
      @fonarte 4 ปีที่แล้ว

      If it's closer to 6500k then it's actually closer to being correct than not. Unless you break out a colorimeter though you will never know.

  • @mahayanaconfidential6452
    @mahayanaconfidential6452 4 ปีที่แล้ว +1

    I thought I was the only one person interested in emulators. I feel old , I play resident evil 4 on my old phone. This was on a console!!!

  • @zayag3543
    @zayag3543 4 ปีที่แล้ว

    Any comment on the defective dpads being reported? Was thinking about picking this up but that has me second guessing myself. Has the manufacturer said anything about this?

  • @ThOoMii013
    @ThOoMii013 4 ปีที่แล้ว +1

    @taki after this run. What kind of colors will be available? I really like the pocket go color scheme.
    And 2nd question. Is there a frondend available for these devices. So you can add videosnaps etc. To all of the games and systems. Like arcbrowser for android?? Pls reply I am really keen on knowing this.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      The only front end that's available is emulationstation, but it doesn't support video snaps and it's not worth using.

    • @ThOoMii013
      @ThOoMii013 4 ปีที่แล้ว

      @@TakiUdon tnx for your reply. Do you think its something that might be developed for these kind of devices? Or is that simply not possible?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      @@ThOoMii013 it's possible, I just don't think anyone will work on one

  • @diversionmary
    @diversionmary 4 ปีที่แล้ว +4

    In summary, this is a pg2 with a “cool” screen, pcb revision, and two extra screws? Did they fix the dpad height issue?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +3

      I don't want to say yes and end up being wrong. Even with the PG2, there's a 50% chance of getting a unit that will require harder presses in one direction, which is why I showed how to fix it.

    • @diversionmary
      @diversionmary 4 ปีที่แล้ว

      Np, I won’t hold you to it. Got ship notice for my pg2 today, excited! Also got ship notice for my founder’s Fixture S1. I read these early models are trash, but hopefully they perfect the idea for production.

    • @diversionmary
      @diversionmary 4 ปีที่แล้ว

      Also thanks for your work on this channel, I really appreciate how thorough you are! Happy holidays!

    • @TrueDreams
      @TrueDreams 4 ปีที่แล้ว +1

      I Recieved my pg2 a few days ago and it was a preorder unit. I did get the extra 2 screws for the back cover. And the screen is on properly but there is some dust under it.

    • @diversionmary
      @diversionmary 4 ปีที่แล้ว

      Taki Udon received my pg2 today and I’m bummed about it. Lowest volume setting is super loud. Down and right on the dpad require a very strong press. I’ll need to do the tape trick. It sounds like the tape trick wears off pretty quick?
      Oh well. There’s always something wrong with these units. It’s like the designers don’t actually use them.

  • @baddabaddabaddaswing
    @baddabaddabaddaswing 4 ปีที่แล้ว

    I keep going back and forth for this... or wait for the ODroid Go Advance...

  • @JuanGomezYT
    @JuanGomezYT 4 ปีที่แล้ว

    I like the screen of the playgo better but I just hate the bland black color and love the white/gray on the pocketgo v2. So I think I'll go with that. Was leaning for the powkiddy q90 cause I'm all about the looks but it seems it cannot run SNES well. Are you going to make a video on that one?

  • @alansmemoriesofnothingands8029
    @alansmemoriesofnothingands8029 2 ปีที่แล้ว +1

    warm color means 24bit?

  • @brandon_leeroy135
    @brandon_leeroy135 4 ปีที่แล้ว +1

    Wait, is this the Pocket Go 2? Are they just branded differently?

    • @mr.n476
      @mr.n476 4 ปีที่แล้ว

      Thats what i thought. Can someone explain???!

  • @lafaqmacros8667
    @lafaqmacros8667 3 ปีที่แล้ว

    Hey. On the allieexpress it says "48 to 49€". I want to know how much you paid for it cause I kinda don't wanna be mislead by that price tag cause I don't know if I'm seeing right. I'll be waiting for a response

  • @felipefgoliveira
    @felipefgoliveira 4 ปีที่แล้ว

    I am really in doubt which console should I buy. I want to play ps1 rpgs such as Chrono Cross and FF, would you say that PlayGo is the current best cost-benefit?

  • @freddycortez9964
    @freddycortez9964 4 ปีที่แล้ว

    Yessss I see jojo I finished watching all the seasons the other day! Taki have you come across any portables that can use internet? Can these devices also hold videos? Thanks for the review!

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      This and the others that I have reviewed can all store and play videos, but you'll need to switch to a pi or Android for internet.

    • @freddycortez9964
      @freddycortez9964 4 ปีที่แล้ว

      @@TakiUdon not bad thanks I have a lot of downloaded anime and movies I would like to watch when I'm not taking what anime do you recommend Taki? Lol

  • @TrueDreams
    @TrueDreams 4 ปีที่แล้ว

    Hi Taki, after I watched the new pocket go 2 video I preordered and it arrived. But I can get the brightness selection to work? It says select plus volume up / down?

  • @Dikwili
    @Dikwili 4 ปีที่แล้ว +1

    Well damn. I already ordered the white one.

    • @Dikwili
      @Dikwili 4 ปีที่แล้ว

      @@darekm6859 i ordered this one as well. It does come with less storage, but now i can decide which one i want to keep.

  • @wolvermonkey
    @wolvermonkey 4 ปีที่แล้ว

    Just wondering, would my SD card full of games in my original Pocket Go work in this or a Pocket Go 2?

  • @truck-kun5924
    @truck-kun5924 4 ปีที่แล้ว +1

    Can I play Pokémon in this? Or other playstation or emulator games?

  • @Stefanoabed05
    @Stefanoabed05 4 ปีที่แล้ว

    Hey taki old video i know, but can you tell us if the d-pad was fixed with the playgo?

  • @ItzSplaSh
    @ItzSplaSh 4 ปีที่แล้ว

    So it doesn't matter if I buy the PlayGo or the PocketGo V2/New PocketGo?

  • @GoatZilla
    @GoatZilla 4 ปีที่แล้ว

    YA IT LOOKS SO FERMILIER

  • @cfmechanic
    @cfmechanic 3 ปีที่แล้ว

    I dont see any Mario. I am looking to buy this but definately would like Mario or zelda. Where do I go to add to the list or am I stuck with what's already loades

  • @benm.viraa.5521
    @benm.viraa.5521 4 ปีที่แล้ว +1

    As I hv watched this video for the 100000th time, I wonder is worth it as frm your videos I hv bought the Rg350 itis awesome, new to this community pls advice. My will to buy this play gonis cause the buttons are flat.

  • @garykwan360
    @garykwan360 4 ปีที่แล้ว

    Looks good

  • @eliascsjunior
    @eliascsjunior 4 ปีที่แล้ว

    The original pocket go has a warm or cool screen? I quite dont get the difference...

  • @crunchychips8123
    @crunchychips8123 4 ปีที่แล้ว

    Do these have better dpads than the original PocketGo? I bought the original, and I never used it due to the dpad.

  • @AnVan102
    @AnVan102 4 ปีที่แล้ว

    Great and very informative video! I'm new to this type of gaming device, so please excuse my newbie question: how do you add ROMs to the 2nd SD card (the one that does not contain the OS)? Does the Playgo system just recognize the added ROMs? Or do I have to do something for it to recognize the added ROMs?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      All you do is organize the files in to whatever folder structure you want. After that, you navigate to those folders inside an emulator and they will run.

    • @AnVan102
      @AnVan102 4 ปีที่แล้ว

      @@TakiUdon Thanks for the prompt reply!

  • @scorchingemblem7873
    @scorchingemblem7873 4 ปีที่แล้ว

    So wait, is this just a black Pocket Go or is this different from the Retail Version?

  • @EndaRochford
    @EndaRochford 4 ปีที่แล้ว

    Well I guess this is the first thing I'm buying in January

  • @ColtonSimmonsPhotography
    @ColtonSimmonsPhotography 4 ปีที่แล้ว +8

    "Sepefications" dying on the inside.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +7

      I had to check and make sure I didn't say that word wrong :D

    • @ColtonSimmonsPhotography
      @ColtonSimmonsPhotography 4 ปีที่แล้ว +2

      @@TakiUdon Nah homie you are good! Tell the company I'd spell check for devices!

  • @newneorodriguez7883
    @newneorodriguez7883 11 หลายเดือนก่อน

    Hola, se que ya es viejo este video y la consola pero me la acaban de regalar y no se como poner jiegos de ps1, ni que extensión ponerle, o si van comprimidos o no, o llevan bios o algo ,me podrias ayudar con eso?

  • @VinceHase
    @VinceHase 4 ปีที่แล้ว

    Does this black model come with the rubberized thumb stick, or is it still the plastic one?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      Still the plastic one :/

  • @thelegendaryzoltan9628
    @thelegendaryzoltan9628 4 ปีที่แล้ว

    Is this the same as or different from the pocket go 2? I'm confused about these really similar looking devices.

    • @danglup9587
      @danglup9587 4 ปีที่แล้ว

      same hardware but different shell

  • @SpinneretteAlex
    @SpinneretteAlex 4 ปีที่แล้ว +2

    would a fast charger work with this? and any reason to order one if i already ordered a rg350?

    • @TrueDreams
      @TrueDreams 4 ปีที่แล้ว

      I don't see any reason in getting it unless you wanted a slimmer profile with one less analog stick and less battery life. I only picked up the pg2 because of price point and so far so good.

  • @manicsithnick
    @manicsithnick 4 ปีที่แล้ว

    Hey just curious, what games are you playing in this video?

  • @THighlander
    @THighlander 4 ปีที่แล้ว +4

    Why is the logo so important is dosent effect game play and that’s honestly the only thing that matters for these handhelds

  • @TheFlamingmoe86
    @TheFlamingmoe86 4 ปีที่แล้ว

    Im from UK I just bought the pap kii handheld with all the 16bit consoles I'm very happy with it but was wondering what would be the best handheld to get with the 128bit consoles I specifically want PS1 N64 and Dreamcast on the handheld that has to be paramount for me as I want the games on those specific consoles been looking on Amazon would like to spend just under £100 sterling would you have any recommendations could u send me some links so I can have a look possibly hopefully hear from you soon thanks for these reviews and videos they have been really helpful

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      Hey, the cheapest device that can do those three systems is the PowKiddy X18/X15, but there will be better options for the same price in a few months

    • @TheFlamingmoe86
      @TheFlamingmoe86 4 ปีที่แล้ว

      @@TakiUdon and those support PS1 N64 and Dreamcast? Thanks for the rapid response

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      @@TheFlamingmoe86 yes, but you don't get perfect N64 on devices like these yet. You'd have to go to a phone with a controller for that at a reasonable price.

    • @TheFlamingmoe86
      @TheFlamingmoe86 4 ปีที่แล้ว

      @@TakiUdon realistically I only want Goldeneye and the super Mario 64 for the Nintendo my main priority is the PS1 with the games on it and the Dreamcast cause I really wanna play shenmue again on there and all the sonics that were on the DC the 64 I could live without lol just can't seem to find it on Amazon only AliExpress and have never bought anything from there before have u and would u recommend using it to buy stuff from the 30 day delivery wait is abit of a sting compared to Amazon getting next day delivery

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      @@TheFlamingmoe86 unfortunately, Goldeye requires better devices than we have now to run without issues

  • @xxkibaxxscj
    @xxkibaxxscj 3 ปีที่แล้ว

    Can this play turbo graphix? I can't find full emulation list anywhere online :(!

  • @GondrezHardstyle
    @GondrezHardstyle 4 ปีที่แล้ว

    Where should I buy the Playgo or the Pocket Go? I'm from Belgium, I don't want to pay import taxes :/

  • @jsvd1546
    @jsvd1546 4 ปีที่แล้ว

    I ordered one after seeing your review. I really like it, except for 1 thing. The lowest volume of the internal speaker is way too loud. Any idea if there is a fix for that?

    • @christopherjacobson8109
      @christopherjacobson8109 4 ปีที่แล้ว

      Job van Dongen upgrade to most current rogue cfw. The sound mixer works better

    • @jsvd1546
      @jsvd1546 4 ปีที่แล้ว

      @@christopherjacobson8109 can I use pocket go 2 firmware for the playgo?

  • @hunterdream4284
    @hunterdream4284 4 ปีที่แล้ว +1

    Why i would buy these stuff if i have phone that rum emulators??

  • @johnvattic
    @johnvattic 4 ปีที่แล้ว

    Thanks again for your video. My unit finally arrived but since I somehow can't switch to fullscreen in gambatta emulator (the options in your video are simply missing) I wanted to install a custom firmware. Which one works with this? Pocket Go v2? Myoo? Thanks

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      You can just side load a newer ReGBA emulator for the rg350. There's no real cfw worth updating to yet.

    • @johnvattic
      @johnvattic 4 ปีที่แล้ว

      @@TakiUdon Thank you for your quick reply

  • @pemuda7075
    @pemuda7075 4 ปีที่แล้ว +1

    man, these chinese companies make great design for their boxes.

  • @dariollanos
    @dariollanos 4 ปีที่แล้ว

    would you recommend this version over the pocket go 2?

  • @MrEightfortytwo
    @MrEightfortytwo 4 ปีที่แล้ว +6

    What about the firmware I can't find for the miyoo max?? Why do they make 3 of the same device with different names.
    Mine has been a brick since day one and I can't find any support any of these... I DONT reccomend these. My RG350 is better and there are tons of videos on them.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +2

      @matthew, you could have downloaded the firmware for the device a long time ago. It's been on Discord for two weeks.

    • @MrEightfortytwo
      @MrEightfortytwo 4 ปีที่แล้ว

      Where? Can you please leave a link

    • @MrEightfortytwo
      @MrEightfortytwo 4 ปีที่แล้ว

      I have searched

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +5

      @@MrEightfortytwo drive.google.com/open?id=1uJfi2htvGDnv3v9qbXBvmiSfU_bxeCo5

    • @MrEightfortytwo
      @MrEightfortytwo 4 ปีที่แล้ว +3

      I have tried this image, I use disk genius to extend it like it says with no luck still, I obviously have one of the first versions as there are only 2 screws on the back, I think this thing is a brick, it will not hold a charge either. Power light just stays orange for hours as soon as I unplug it no lights no nothing......
      I really like the form factor of this thing, sucks it doesn't work. I'm confused on all the names of the product and don't know why they would release revised versions of this unit and leave the customers with ones that are unfinished..
      I do appreciate your help and enjoy your videos. I think I just got the short end of the stick on this one and am about ready to toss this thing in the trash..

  • @r4dius
    @r4dius 4 ปีที่แล้ว

    Device looks nice :)

  • @SRMB1
    @SRMB1 4 ปีที่แล้ว

    Great videos. Question is PlayGo or do I get RG350?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +2

      Check back later

  • @imacmill
    @imacmill 4 ปีที่แล้ว +2

    I own a chinese handheld, an RG 2 Anniversary, and while it's a nice little device, there's one thing about it that keeps me from loving it...there is no way to create a 'Favourites' list, or a 'Recently Played' list. Since I have about 3000 games on it, and jump around between about 10 games or so at any given time, it is a serious PITA hunting thru systems and ROM lists to find what I've been playing. Does anyone know if there is a solution for this, other than making my own favourites folder manually on the SD card?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +5

      I agree with this 100% - I always end up just adding a second folder just for the games I want to play frequently.

    • @imacmill
      @imacmill 4 ปีที่แล้ว +2

      @@TakiUdon thanks, Taki. I guess I'll just have to do it manually.

    • @HypocritesExposd
      @HypocritesExposd 4 ปีที่แล้ว

      Yeah I usually make Favorites, To Be Played, and Complete Games folders

    • @imacmill
      @imacmill 4 ปีที่แล้ว

      @@HypocritesExposd I hope the OpenDingux developers can add a Favourites feature sometime...at the very least.

    • @trashandchaos
      @trashandchaos 4 ปีที่แล้ว

      There's a replacement launcher for these called esoteric that has this as a feature now.

  • @_Majoras
    @_Majoras 4 ปีที่แล้ว +1

    i thought the miyoo logo (dark orange font) for the black prototype was perfect it shouldn't be distracting but if theres nothing there its just too plain it ends up looking like some cheap 3d printed toy. problem is no one knows how to design 'good' logos

  • @mzterzi
    @mzterzi 4 ปีที่แล้ว

    Can you please make a video on the details, like: how to use the system, where to find and download roms, how to add and delete roms. What is the 'discord' that you mention? Otherwise your channel is mainly for people who know what to do. Still, I like your reviews, even though I don't understand everything. Thanks

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      Hey, i have a discord linked on my main TH-cam page. That's a better place to get help with more stuff like that 😉

  • @bollyduster2652
    @bollyduster2652 4 ปีที่แล้ว

    Can you please show us how to add games on this device . Im new in the retro thing. And thanxs for your content, i get me a Pocket Go 2 and i Love it .

  • @antwango
    @antwango 4 ปีที่แล้ว

    will there be an updated JXD S7800B? that device is awesome, a switch before the switch lol... a proper bigger vita!

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      JXD went defunct and lives on with GPD

  • @pinkspider28
    @pinkspider28 3 ปีที่แล้ว

    Does this run games like street fighter 3 or killer instinct arcade

  • @kenoty7769
    @kenoty7769 4 ปีที่แล้ว

    Will it be available here in the Onlineshopping site Shopee Philippines? Because I don't have a credit card to use to buy in AliExpress

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว

      I haven't had any conversations with these companies about selling on other platforms like that

    • @kenoty7769
      @kenoty7769 4 ปีที่แล้ว

      @@TakiUdon Please tell them to sell it here on Shopee Philippines because RG350 retro handheld can be found in this site but i don't like RG350 what I want is Play Go

  • @str0680
    @str0680 4 ปีที่แล้ว

    oh my god finally

  • @rcboosted
    @rcboosted 4 ปีที่แล้ว

    Stereo Speakers, 4 shoulder buttons, 1 or 2 joysticks, 1 d pad, IPS display, HDMI out. Seems like nothing recent fits the bill other than the older XD Plus. They either have 2 shoulder buttons and HDMI out, or 4 shoulder buttons and no HDMI out. Too bad I have the XD, I can't get clean rom.

  • @Draeka
    @Draeka 4 ปีที่แล้ว

    I'm learning as I go but I don't know what you folks do. If I want to get a good handheld that plays all emulators and has all games which one should I look into?

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      The has all games thing might be too difficult since these are technically not supposed to be sold with roms.

  • @RallyDon82
    @RallyDon82 4 ปีที่แล้ว

    ordered pocket go a couple weeks ago from retro mimi still waiting on it so i'm wondering how people are getting these devices.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +1

      These are honestly a steal when you think that the 350 was selling for almost $100 for the same specs a few months back

  • @fangfactory3765
    @fangfactory3765 4 ปีที่แล้ว +1

    which is better retroid pocket 2 or this ?

  • @Peppermint1
    @Peppermint1 3 ปีที่แล้ว

    Does it support Atari 2600 ?

  • @Sneakers8b
    @Sneakers8b 4 ปีที่แล้ว

    Can you do a video on how a install a resistor on the speaker wire, this thing is obnoxiously loud. Like pissing me off loud...

  • @ИванКочержук-н9м
    @ИванКочержук-н9м 4 ปีที่แล้ว

    Thanks

  • @themax23
    @themax23 4 ปีที่แล้ว +7

    powkiddy q90 please.

    • @TakiUdon
      @TakiUdon  4 ปีที่แล้ว +8

      Be prepared to be disappointed.

    • @computersxd
      @computersxd 4 ปีที่แล้ว +2

      @@TakiUdon i hear its same processor as the pocket go v1. like wtf? lmao