Only thing I don't like is the preset temperature the fan comes on which is pretty close to the cut off high temperature safe guard,I would prefer if the fan came on at 65 to 70f.
Look how long it took to fill a hose!!!! Buy the new Benjamin Traveler gen 2. It is very similar to the Nomad 2. It takes a couple drops of silicone oil every 5 fills. It pumps much quicker than the umerax does. Same amount of time as the Nomad. But I think it will be much more reliable than the Umarex unit.
Just asking on most compressors you have to start with the bleeder valve open when you start the machine then shut it after the machines running you have to do that with this one it's supposedly saves on the piston
I am asking anyone this question, If you have an Umarex Legends MP40 Semi/Full auto Submachine Gun? and if you think it is possible to build a system that would use either air handpumps, HPA tanks, and PCP for the legends MP40 to be fitted with a regulator, fitting, and air hose to go where the clips piercing plug, screw that goes into the Legends MP40's clip...To use compressed air instead of the CO2 air. ??? So as to not have to deal with cold air, freeze up's with CO2.
Get it before Christmas rush people!!!
How about the piston maintenance/rebuild needed every 20 hrs of use? Is it complicated.?
What is the answer to that question? Very important!!!
@@TheOverlyHackeled there’s videos out there, it’s simple enough with a screw driver, a oring pick, and some patients.
Only thing I don't like is the preset temperature the fan comes on which is pretty close to the cut off high temperature safe guard,I would prefer if the fan came on at 65 to 70f.
500cc bottle fill time ?
Look how long it took to fill a hose!!!! Buy the new Benjamin Traveler gen 2. It is very similar to the Nomad 2. It takes a couple drops of silicone oil every 5 fills. It pumps much quicker than the umerax does. Same amount of time as the Nomad. But I think it will be much more reliable than the Umarex unit.
How is the warranty on this unit and how does it compare to the Xisico?
Just asking on most compressors you have to start with the bleeder valve open when you start the machine then shut it after the machines running you have to do that with this one it's supposedly saves on the piston
Thats correct
I am asking anyone this question, If you have an Umarex Legends MP40 Semi/Full auto Submachine Gun? and if you think it is possible to build a system that would use either air handpumps, HPA tanks, and PCP for the legends MP40 to be fitted with a regulator, fitting, and air hose to go where the clips piercing plug, screw that goes into the Legends MP40's clip...To use compressed air instead of the CO2 air. ??? So as to not have to deal with cold air, freeze up's with CO2.
Mine lasted one week.
Top much noise let’s see how long it last!
Way too loud