Its carbon fibre, is is always going to cost a lot, its why no one uses it, try getting a car panel in carbon fibre, its a fortune for the proper weaved stuff. not sure about the quality of the stuff used on this case but based on what I can see without the feel test, its pretty good quality.
Carbon fibre has always fascinated me. It’s such a beautiful looking material. Light and strong. Never though I’d see a pc case made out of it however 😮
Very dramatic - looks a bit busy for me, but then again its an open case and its carbon fibre, so its always going to look in your face - but its such a nice build, very clean, straight lines - nice hardware selection - super coolant which I assume is the fancy name EKWB give for red coolant - dont think Alphacool do that color, but I could be wrong - anyhow, super job James - very clean job ! 😎
Mr James Dawson - you are truly a class leading icon of PC case building - I keep going back to your AMD Frame build from years ago - madest looking pc I have seen
This is certainly something I dont think I have ever seen before, very striking ! I think the dust maintainance alone would give me concern, but really enjoyed the video and the timelapse subscribed!
Its like watching a master at work. epic fantastic ! It looked quite good at the start, but by the time you got finished, it was basically my dream build
Very nice build man ! That time lapse was so relaxing to watch ❤ I think that distro was the perfect occasion to use straight carbon tubes you nailed it
I would be cleaning this weekly , but such a great build James, I love watching you make a system, you think things out so well and pick great components and get it all matched up
@@docbrody I like it from some angles, then other times I am not so sure. At least its different, right? so many fish tank cases now, getting old quickly
James a masterpiece - I hope Alphacool fill the hole that EKWB left in the market. never hear much from them however - they dont seem to do much work - so good to see this one
I don't know why but I was not expecting the carbon fibre tubes for the loop, the build looks sick! If I didn't already have a full EK loop 7800X3D and 4090 with 3x360mm rads, and 10 T30s in my Lancool III I'd be super jelly!
That is pretty eye catching - wouldnt say I would rush out and buy it, my last expensive case was the hideous Level 10 by Thermaltake eons ago, but i enjoyed the content. Dont often see much happening from Alphacool and I figured they would be all over the EKWB failures to capitalise on the market.
Is like a kit car style idea - its pretty creative in some areas, like the drive panels and some of the ideas on the paneling . Its very well put together and with the cost of proper carbon fibre I am shocked they could hit the sub 1000 euro price point to be perfectly honest.
I dont know if that is fugly or stunning - some angles its delighful, from other angles I dont know what to make of it - the red coolant sets it off james - as always what a stunning bit of work
I would love this - my buddy has carbon fibre parts on his car, its such a nice material, especially if you get the new matte finish - looks legit carbon fibre too, you can usually tell the fake chinese wrapped stuff. well done alphacool ! the case world is so boring now with fish tank cases everywhere.!
Its certainly unusual - great choice of materials and it gets my vote for not being the usual run of the mill £150 box you get. James what is the Alpahcool gear like in 2024? I briefly went into some of their hardware years ago and found it a bit lacking in quality - has it improved at all?
If I'd ever want or need a water-cooled pc, then this is it. Astounding build, one of absolute excellence. The only thing I wonder about, seeing the rog matrix platinum gpu by DerBau3r in this build :3
That case is gorgeous, but while you where taking out the side glass panel and saying it is an old style design, I took a glance at the (99$) 8yr old NXZT S340 sitting on my desk... Alphacool did a worse job there than NZXT did 8 years ago! The S340 side glass panel mounts in a similar way, but the screw part is atached to the case with a rubber ring around it to help locate and hold the panel while you screw and unscrew the thumbscrews, I'm baffled by that design choice.
Very nice. I'm sure I'll find that 1000ish Euros down the back of the sofa. 🤪 Apart from the wobbly PSU mount this looks excellent. I'm sure that 2200 watt PSU is at peak efficiency when pulling ~500watts from the wall. 😇Honestly, what on earth would need that kind of power when we only have 1x CPU and 1x GPU to play with? Whose GPU anti-sag support did you use? It didn't look terribly out of place. 12/10👌Mint, mate.
The thing is it keeps both the CPU and GPU cool under full load with fans running under 1000rpm so the key thing is to make sure you set up custom fan curves
Given the open-frame design and the use of carbon fiber and aluminum, how does this case perform in terms of thermal management, especially when under heavy load? Are there noticeable temperature drops compared to traditional closed cases?
i think you solved the cases problem with the gpu mount to hold up the psu. If you did not say anything people would have thought that's how the case comes.
@KitGuruTech initially I wanted to criticize the "case" but as spent time watching the case design itself as a case became irrelevant when you look at the entire build
I always will love watercooling. By the way, do you plan on making a non rgb all whiteout build? Back in the day, the NZXT N7 Motherboard was very nice. But now, i don't understand why they changed the minimalism.
Its certainly a statement piece- not sure its 100% practical but I like companies who try to break out of the norm., which right now is aquarium cases.
Looks great, but also doesn't, too busy, too open, have fun with the dust, not even that much radiator or fan support, not that great or many placement options for things, just carbon and aluminium. Wish i could afford it, but i'd definitely build something else. Of course taste is personal, but i feel you can get better with more options for everything for less.
I really do like Alpha cool stuff the rads and blocks are quality, that case is on the pricey side, though, and would have expected a 140 option on the rear fan (does it actually provide any benefit in an open case?) and a much better way to fill the distro plate, looked very tortured and non optimal. Very much has the feel of a version 1. Not sure that PSU would work in in the US on their neutered 110v and 16 amps supply (max 1760w). Shame.
Wow Alphacool should hire Kitguru to make these for their shows, that is just simply epic!
Thanks, I'm glad you like it.
it is amazing - so is the price !
Its carbon fibre, is is always going to cost a lot, its why no one uses it, try getting a car panel in carbon fibre, its a fortune for the proper weaved stuff. not sure about the quality of the stuff used on this case but based on what I can see without the feel test, its pretty good quality.
Carbon fibre has always fascinated me. It’s such a beautiful looking material. Light and strong. Never though I’d see a pc case made out of it however 😮
Stunning looking thing. Got real envy 😊
Very dramatic - looks a bit busy for me, but then again its an open case and its carbon fibre, so its always going to look in your face - but its such a nice build, very clean, straight lines - nice hardware selection - super coolant which I assume is the fancy name EKWB give for red coolant - dont think Alphacool do that color, but I could be wrong - anyhow, super job James - very clean job ! 😎
You said it better than I could, 100%
Pretty sure that is EKWB coolant yes.
Im glad you liked the build, coolant is a special mix 😄
A special mix. Tell us more 😉
Mr James Dawson - you are truly a class leading icon of PC case building - I keep going back to your AMD Frame build from years ago - madest looking pc I have seen
Thanks 😁
That timelapse was so relaxing - love James builds - guy is a legend
The time lapse builds are always great, love it when they appear!
I think I briefly saw this in leos coverage from an event many months ago - took some time to get a show build up for it - looks incredible
On a lighter note the timelapse was super relaxing, nice music choice :)
The choice of hardware is very well done, bravo james
Thanks !
This is certainly something I dont think I have ever seen before, very striking ! I think the dust maintainance alone would give me concern, but really enjoyed the video and the timelapse subscribed!
Great point!
Just in time for the weekend, perfect thank you
Thanks Kitguru, great showcase build of what you can do in this case - not sure my own build would look this good, thats for sure !
Glad to help
Well I wasnt expecting to see a 1000 euro case today, thats something else !
Not too many of them around 😉
That coolant in that stands out a mile, like those clever photos you see all black and white and then they put some red flower in the middle
Thanks James, great build
Glad you like it
The choice of coolant is nice, would have liked to see a white liquid too, would have looked just as good, but more monochome
Thanks James, I do enjoy your videos, dont really post much as I have generally very little to say - but keep up the good work ! (groans)
Thanks 👍
@@KitGuruTech Welcome!
I love your watercooling style. That Alphacool block looks high quality and beautiful.
Its like watching a master at work. epic fantastic ! It looked quite good at the start, but by the time you got finished, it was basically my dream build
Thanks, I'm glad you like it.
That really is a work of art. it would be destroyed in my hour in literally days, but absolutely out there
James - legend - nuff said
Thanks !
That red liquid looks almost orange at times, but I love a good blood red build!
Think it's just the video lighting, it's quite a deep red really.
It always looked red on my screen.
Looks amazing ! too expensive for me, but impressive
Think if you're already spending 650 euros you may as well go for it and but the pro version with the custom distro plate.
Nice ! Congratulations !
Hi from all of us over here in Frankenmuth, Michigan !
Yeah thats wicked . wish I had the abililty to do the hard loop - wish you could do a guide for doing a hard loop system - no good guides on youtube
Very nice build man ! That time lapse was so relaxing to watch ❤
I think that distro was the perfect occasion to use straight carbon tubes you nailed it
Thanks, I'm glad you like it. 😊
James, very happy to see you using my CPU ! amazing build - one of the most interesting ive seen in years. very industrial/modern and evil looking
Thanks, I'm glad you like it. 😊
I would be cleaning this weekly , but such a great build James, I love watching you make a system, you think things out so well and pick great components and get it all matched up
I'm glad you enjoyed it. 😊
Has great access points. I think it might be easier than having it fully enclosed.
One of the best looking builds I've seen....awesome!
Wow, thanks!
Stunning build James. I love this case. I’d never buy it but I can certainly admire it 😮
Well at least that’s something then 👌🏻
1000 euros, they must be mad - looks great for 400-600 max
Agreed, but now I’m not sure I even like the look - it’s kinda busy.
@@docbrody I like it from some angles, then other times I am not so sure. At least its different, right? so many fish tank cases now, getting old quickly
Carbon fibre - the proper stuff anyway--- aint cheap !
Exactly its just too much.
Delightful build. Yes my young daughter loves that word so I thought I’d use it myself today ❤
Love that!
A work of art - cant argue that. amazeballs Mr Dawson !
There are, i think 10 other cases that are like that.
Thanks!
James a masterpiece - I hope Alphacool fill the hole that EKWB left in the market. never hear much from them however - they dont seem to do much work - so good to see this one
Alphacool has some great products, worth checking them out.
Cant imagine not doing a vertical GPU with a build like this.
I don't know why but I was not expecting the carbon fibre tubes for the loop, the build looks sick! If I didn't already have a full EK loop 7800X3D and 4090 with 3x360mm rads, and 10 T30s in my Lancool III I'd be super jelly!
Glad you like it!
James what a build ! Speechless
Thanks !
I love Alphacool - this is a great idea. Not sure its very practical in the real world, but looks like something out of a space ship
I like this. Using high quality materials, nicely designed and very unusual. Only problem is that it’s out of my price range.
That is pretty eye catching - wouldnt say I would rush out and buy it, my last expensive case was the hideous Level 10 by Thermaltake eons ago, but i enjoyed the content. Dont often see much happening from Alphacool and I figured they would be all over the EKWB failures to capitalise on the market.
Is like a kit car style idea - its pretty creative in some areas, like the drive panels and some of the ideas on the paneling . Its very well put together and with the cost of proper carbon fibre I am shocked they could hit the sub 1000 euro price point to be perfectly honest.
I dont know if that is fugly or stunning - some angles its delighful, from other angles I dont know what to make of it - the red coolant sets it off james - as always what a stunning bit of work
Thanks 😊
Like the way you torqued down that graphics card to the water block.
I would love one of these cases its the sort of thing that you can keep basically forever.
Literally looking at this case yesterday even though I don't need it xD
I would love this - my buddy has carbon fibre parts on his car, its such a nice material, especially if you get the new matte finish - looks legit carbon fibre too, you can usually tell the fake chinese wrapped stuff. well done alphacool ! the case world is so boring now with fish tank cases everywhere.!
Is that Alphacool coolant? never seen that before - have you got a link for me? would love to use it
It's not Alphacool, it was a custom mix. 😊
Really fun video to watch, thank you.
1000Euro to showcase the amount of dust it collects in 2 months :D
Glad you enjoyed it!
great to see them not just using carbon fibre wrap over metal. bonus points 🤑
Hate that stuff it looks so pretend. Maybe dipped carbon fibre but even that is just pretending.
Gosh what a build! Amazing job buddy
Thanks.
A james build on a friday, time to get a coffee and a biscuit and relax (well once my boss goes for his lunch anyway)
I am usually not a huge fan of the carbon esthetic, but this is looking sick.
Its certainly unusual - great choice of materials and it gets my vote for not being the usual run of the mill £150 box you get.
James what is the Alpahcool gear like in 2024? I briefly went into some of their hardware years ago and found it a bit lacking in quality - has it improved at all?
I have been impressed with some of the recent Alphacool gear. They seem to have stepped up their game with the new GPU blocks and distro plates.
Thank you for this video. This crazy case is just too expensive for me. But I love it.
If I'd ever want or need a water-cooled pc, then this is it. Astounding build, one of absolute excellence.
The only thing I wonder about, seeing the rog matrix platinum gpu by DerBau3r in this build :3
Thanks and yes good gpu !
Looks like it should be show in some futuristic museum
🥳
10:19 Well, that's gonna run a couplemof Mac Minis :D
Its BATMANS PC ! love it !
Wow, Wow, Wow and Wow. and the price, wow too.
I love it, cant afford it, but nothing new there :(
Are you sure this is real carbon fibre and not some kind of glued on cover material? what weight is the case?
That bistro plate is very nice.
That case is gorgeous, but while you where taking out the side glass panel and saying it is an old style design, I took a glance at the (99$) 8yr old NXZT S340 sitting on my desk... Alphacool did a worse job there than NZXT did 8 years ago! The S340 side glass panel mounts in a similar way, but the screw part is atached to the case with a rubber ring around it to help locate and hold the panel while you screw and unscrew the thumbscrews, I'm baffled by that design choice.
The weight is really good, carbon fibre is so light. I cant afford carbon fibre for my car. amazed they are doing it for pc now!
Far too expensive a material for most people. isnt the roof on the M Series M5 BMW competition carbon fibre? I think its a £12k extra
Very nice. I'm sure I'll find that 1000ish Euros down the back of the sofa. 🤪 Apart from the wobbly PSU mount this looks excellent. I'm sure that 2200 watt PSU is at peak efficiency when pulling ~500watts from the wall. 😇Honestly, what on earth would need that kind of power when we only have 1x CPU and 1x GPU to play with? Whose GPU anti-sag support did you use? It didn't look terribly out of place. 12/10👌Mint, mate.
Would need to make sure you picked the fans well in this one - could get very loud as an open case
The thing is it keeps both the CPU and GPU cool under full load with fans running under 1000rpm so the key thing is to make sure you set up custom fan curves
Good choice on colour for the coolant.
I think so too!
Beautiful build.
Thank you!
Having a back cover for the motherboard is a good idea to enable you to hide most of the wires.
Given the open-frame design and the use of carbon fiber and aluminum, how does this case perform in terms of thermal management, especially when under heavy load? Are there noticeable temperature drops compared to traditional closed cases?
No I don't think so. Modern PC cases can be so well designed in terms of airflow that they perform as good as an open frame.
Carbon fibre just gets me going all the time, my buddy has carbon fibre wheels for his car- cost him a fortune, dual weave or something for strength
I can’t even imagine trying to keep dust out of a case like that 😂😂
Wrap it in cling film? 😊
You'd break stuff by cleaning it. Can imagine snapping bits easily.
wow - that is stunning
i think you solved the cases problem with the gpu mount to hold up the psu. If you did not say anything people would have thought that's how the case comes.
Love that GPU water block.
PC PRON - love it
Masterpiece 👌🏻 👏🏻👏🏻👏🏻
Thankyou 😁
@KitGuruTech initially I wanted to criticize the "case" but as spent time watching the case design itself as a case became irrelevant when you look at the entire build
I always will love watercooling. By the way, do you plan on making a non rgb all whiteout build? Back in the day, the NZXT N7 Motherboard was very nice. But now, i don't understand why they changed the minimalism.
Does carbon fibre improve performance, make it lighter so you get better FPS in gaming?
Not really 😊
top quality content, well done
Alpha cool - this is amazing - didnt EKWB do something similar before they decided to shut themselves down?
yeah i saw some coverage from CES last year I think, along with their playstation project. such a waste of a good company.
Loads of thought has gone into this but for the price you would expect that wouldnt you.
Any connection to the Cougar Panzer Max G case? The overall shape and some features such as the thumb screw side panel look near identical
For me Carbon Fiber where it does not need to be, is like Gold on Burgerbun.
That makes the Burger 100$!
Really nice and clean build, hats off. Looks great.
Its certainly a statement piece- not sure its 100% practical but I like companies who try to break out of the norm., which right now is aquarium cases.
Looks like they took inspiration from Cougar. I like it.
This looks like InWin D-Frame
As del boy would say. Lovely jubbly 🎉
You plonker 🤩
It’s pretty cool. Could have gone the extra mile with an LCD display though.
Yes an LCD could look good in this.
With a 2.2 KW PSU, it removes the need to turn on your heating in winter, I suppose...
🤣
Looks great, but also doesn't, too busy, too open, have fun with the dust, not even that much radiator or fan support, not that great or many placement options for things, just carbon and aluminium.
Wish i could afford it, but i'd definitely build something else.
Of course taste is personal, but i feel you can get better with more options for everything for less.
Thanks for sharing your thoughts 👍🏻
Epic watercooling - carbon fibre tubing , is that for real or just a shealth over it?
It's real carbon fibre.
2 liters of water?! That's a lot of of heat capacity!!!
A THOUSAND EUROS for a Box to put your computer bits in!!!
Sort of but thats a very simplistic way of looking at it. Why not build a computer out of cardboard while you're at it. Wont cost a penny...
It's a nice looking box though 😊
Better make sure you never knock it over 😂
I have the same shock about my wife's apple collection 😂😂😂
@@JulianTurner2019 Good point never add up how much you've spent on apple stuff. Safer that way.
I really do like Alpha cool stuff the rads and blocks are quality, that case is on the pricey side, though, and would have expected a 140 option on the rear fan (does it actually provide any benefit in an open case?) and a much better way to fill the distro plate, looked very tortured and non optimal. Very much has the feel of a version 1.
Not sure that PSU would work in in the US on their neutered 110v and 16 amps supply (max 1760w). Shame.
The fan would have been best placed blowing across the backplate of the GPU.
I'd buy it but the case is extremely exposed to dust. It's not fully sealed is it?
finger prints!!! its triggering me! good work👍
Thank you! Cheers!
How much did this PC cost to create? all the parts I mean?
I've not calculated the cost but I would estimate between £3-4000.
Carbon fiber and aluminium? Definitely a statement piece - right?
Yep!
This case looks amazing but seems super impractical for every day use..