Range Rover dash faults continue, next step...

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ต.ค. 2024
  • Be sure to check out our first video about the Range Rover fix: "Damn Range Rover faults... let's fix it..." If that video didn't help, stay tuned on this one and let us know in the comments section on how it went!

ความคิดเห็น • 48

  • @mhrmus
    @mhrmus 2 ปีที่แล้ว +4

    A bit late of an update. But if it helps, i replaced the TCM with no success. I was told replacing modules is not plug and play. They have to be flushed and reprogrammed which I did. No immediate success. However I drop the car for about 4 days. And magically one morning the flashing lights were gone and all started working fine. My issue was exactly same as described here since I bought the car 3 weeks ago.

  • @MasonRoyaie
    @MasonRoyaie 3 ปีที่แล้ว +1

    I had this problem too, I ended up paying a shop to check my wiring harness which was a waste of money and time, I had to go to the dealer at the end. At this point dealership diagnostics called for a new instrument cluster. They said the module inside the cluster was gone and I needed to buy a whole new cluster. It cost me $2500 at the dealer for that job.
    It is now about two years later and my instrument cluster has started acting up again. It goes off and on all the time and my search for an answer has brought me here watching this video.

    • @canuckautoworks2809
      @canuckautoworks2809  3 ปีที่แล้ว

      Sounds like you are being given a runaround! And that's expensive - we went with the small thinga first.

    • @edgarlechuga2392
      @edgarlechuga2392 2 ปีที่แล้ว +1

      Never ever go to a dealership

    • @carllavery4069
      @carllavery4069 11 หลายเดือนก่อน +1

      Just get the cluster reflowed mate most company's will give you life time warranty

    • @MasonRoyaie
      @MasonRoyaie 11 หลายเดือนก่อน

      Thank you Carl@@carllavery4069

  • @kemalkale9278
    @kemalkale9278 2 ปีที่แล้ว +3

    I had the same problem. Hdc + transmission fault + engine system fault on the screen. During investigation diagnose showed many fault codes including turbo, high pressure fuel pump, egr valves etc.. but later we found the main problem causing these fault codes. It was one of the injectors. There was a fuel leak from that injector. We changed the o-ring and never had any fault message since then.

  • @nicolasdakota3446
    @nicolasdakota3446 9 หลายเดือนก่อน

    I did all you did in either the new program, but I still have a problem with the key fund by mutual

  • @rafaelbarrera1098
    @rafaelbarrera1098 3 ปีที่แล้ว +2

    Friend, replace the same module but when I turn on the red brake blinks along with the green mountain, my transmission only works in 2, any recommendations how to fix it or reset it?

  • @CertifiedApprovedHustlas
    @CertifiedApprovedHustlas ปีที่แล้ว

    O I have to take the vehicle in to shop to reprogram the tcm? Or can I take just the tcm.?

    • @canuckautoworks2809
      @canuckautoworks2809  ปีที่แล้ว

      You need the vehicule at the shop to configure the module to the others.

  • @aalcabsh
    @aalcabsh 4 ปีที่แล้ว +2

    Thanks a lot but i got a different issue !
    i wash my range rover up , after washing i noticed that the " low mode signal " flushed and the car it self comes ponderous as a rock 😑 .. later on the mechanical said it's the difference turned on and dose not responding to clicking on the button of it ; so it should be turned off manually !
    he switched it off from the dynamo ; but the signal keeps flushing also the transmission comes no smoothy anymore 😭
    so would u plz help me out , will be pleased 🖤
    thanks a lot

    • @canuckautoworks2809
      @canuckautoworks2809  4 ปีที่แล้ว

      Sorry I'm not fully sure I understand.

    • @andreahagan8941
      @andreahagan8941 3 ปีที่แล้ว

      My RRSHSE09 same deal. Changed alternator and installed new battery problem solved I never knew how loud my stereo was till I did those two things. No clue which did the trick I just didn't care to be stranded at the car wash again.

  • @mianalihassan7343
    @mianalihassan7343 2 ปีที่แล้ว

    Hi had the same problem hdc steering angle air spantions system sc range Rover 2013 model

  • @CertifiedApprovedHustlas
    @CertifiedApprovedHustlas ปีที่แล้ว

    There is two green wires that go down in front of TCM that plug into a red and Black wire that was cut on my 2005 LR3 hase does any one know what those are and were the red and Black wire goes to? I can't find it!

  • @abadsultan722
    @abadsultan722 2 ปีที่แล้ว

    What is the problem, in the end, I have the same problem

  • @smx3798
    @smx3798 4 ปีที่แล้ว +1

    Range rover and water in the engine bay dont get along. However if your off road below the intake you are good.

  • @mianalihassan7343
    @mianalihassan7343 2 ปีที่แล้ว

    Hi brother land Rover 2011 model engine plug Fir one time coming again no come so you help me

  • @maskeenabbasi9319
    @maskeenabbasi9319 3 ปีที่แล้ว

    Very good

  • @realg9427
    @realg9427 4 ปีที่แล้ว

    I have a similar problem but mine said 2 wheel traction reduce only
    I have a range rover 2014 evoque
    Do u have any idea what that can be, i bought brand new the battery but i still get that warning

    • @canuckautoworks2809
      @canuckautoworks2809  4 ปีที่แล้ว +1

      Unfortunately I'm not familiar with the evoque models to comment. Sorry.

  • @archerland
    @archerland 4 ปีที่แล้ว

    How much you guys spend on oil change? Or maintenance

    • @canuckautoworks2809
      @canuckautoworks2809  4 ปีที่แล้ว

      We use medium grade oil + Lucas oil additive each time and do oil changes very often.

    • @carlrussell6885
      @carlrussell6885 ปีที่แล้ว

      120

  • @janmalan8204
    @janmalan8204 4 ปีที่แล้ว +1

    wow a have the same problems you have discovery 3 2.7 diesel my name is jan from south africa it drives me mad

    • @canuckautoworks2809
      @canuckautoworks2809  4 ปีที่แล้ว

      Verify the TCM like I show in my video - or I have more videos about this issue, look at the one with the brake switch as it could be related :) Hope it can help you!

  • @KansasItalianCity
    @KansasItalianCity 3 ปีที่แล้ว

    is this is same instructions for 2006 range rover sport hse?

  • @jesusgodjr9873
    @jesusgodjr9873 4 ปีที่แล้ว +1

    Is it air in the tire have to be program too

  • @christianmilbourne1110
    @christianmilbourne1110 4 ปีที่แล้ว

    Did it end up fixing it in the end ?

    • @canuckautoworks2809
      @canuckautoworks2809  4 ปีที่แล้ว +1

      Yes I did, there is a follow up video with details:)

    • @gabrieldegomez2271
      @gabrieldegomez2271 ปีที่แล้ว

      @canuckautoworks2809 Can you share the follow up video. I seem to not be able to find it. Thanks

  • @farooqbhatti2970
    @farooqbhatti2970 4 ปีที่แล้ว

    I hv Range Rover sport he’s 2008 my car problem is not car going front not back .
    And lower gear green button computer error and park light shows.
    Is this gear problem or electric but when I shift gear feels gear shifting nut not moving front or back,
    Any one support me thanks

  • @kevinreis1002
    @kevinreis1002 3 ปีที่แล้ว

    Would it stop the car from starting or letting inf talk to the orher moguls

    • @canuckautoworks2809
      @canuckautoworks2809  3 ปีที่แล้ว

      It would still run but with a bump of options disabled.

  • @sidsalomon224
    @sidsalomon224 4 ปีที่แล้ว +1

    how much is that part ?

  • @andrehill3590
    @andrehill3590 ปีที่แล้ว

    You have to reprogram it and only land rover can do that.

  • @romeukubitz9902
    @romeukubitz9902 3 ปีที่แล้ว

    Faut sisten

  • @jesusgodjr9873
    @jesusgodjr9873 4 ปีที่แล้ว

    Bullshit ECU have to reprogram wtf why buy this fucking car

    • @canuckautoworks2809
      @canuckautoworks2809  4 ปีที่แล้ว +1

      I guess its a security thing too so that nobody can easily swap it... I know right... what happened to the old OBD 1 and 2 days hehe