Milling Wild Cherry, I Wasn't Expecting It To Do This!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Milling a stressed out cherry log.
This log was grown on a slight hill. I did not expect to find tension in it. It will be difficult to get the boards to dry straight. Tension like this usually happens when trees grow on hills. Mill is a Wood Mizer LT15 GO. Tractor is a Kubota L4701 with a Construction Attachments root grapple on it.
Follow us on Facebook!: / falllineridge
Contact: falllineridge@gmail.com
The Flag Was Still There Amazon link. Not an affiliate link.
www.amazon.com/dp/1950794148/ref=cm_sw_r_cp_api_i_EzZlFb2AV6HND
Reading through it now.... great story.
Let's say you a 10-12' Cherry tree, about x 13" and you got 8 boards from it... how much could that be sold for?
@@ricardomagnificent +a
Fall Line Ridge it certainly was not a waste of time you got beautiful boards from the log. I love the woodgrain . Thank for sharing God bless.
I can't stop watching and yet i don't know why. This looks like healthy and noble work.
Beautiful boards!
Outstanding book, very well written. Thanks for putting me onto this book. Thank your father-in -law for his service.
Much appreciated!
Everyone makes mistakes, learning to correct or hide your mistakes is what makes you a great craftsman. This can apply to most any craft
Learning to minimize your mistakes is key.
you are one of the most honest people on u tube. thank you and keep making these good videos i've been watching for about a year
While I was watching thought of your little one and you could make him a sand box but use saw dust, then you can replenish really easy and it cleaner than sand. Most definitely a nice tree!
Not sure how I ended up here but enjoyed your video. We have lots of cherry here on my property in PA.
The largest I have cut and had milled was 38 inches across the stump end. It is beautiful lumber,and use it for furniture building for my home. Thanks for the content.
well done mate! thank you for sharing!
those boards would make a pretty table top. great video.
Wes, thanks for the tip on your father in law’s book!
He was a good soldier and sounds like a fine man, you are lucky to have him as your father in law.
I enjoyed the book and appreciate his service during the service of all who served in Vietnam.
I managed to avoid Vietnam by serving in the Army Reserve for 6 years.
Thank you. Very much appreciate it.
On the side your scrap makes excellent BBQ smoke wood. I've used wild cherry before and it makes tasty BBQ.
I have used it to smoke turkey and pork shoulders. I use both the wood and the sawdust.
Me also, today I am smoking catfish.
I have a 55 gallon drum with a sealable lid and a 4” chimney, load it with chunks, throw it on a campfire and turn the chunks into lump charcoal. It’s really amazing and good excuse to drink beer by a fire all night.
I love working with cherry, looks awesome as well.
Love working with cherry. Did a mantle over the fireplace. Beautiful color.
Thanks for the videos. I am waiting for my mill to arrive and I'll get started...EB
Thanks. Always enjoy and learn a lot each time. You make a good presentation and don't attempt to tell us things you don't know. That's very commendable of any man in the public view.
Thanks!
Gorgeous logs. They may be excellent for building a nice piece of furniture!
Regarding your father in law's time serving in Vietnam, first of all THANK YOU FOR YOUR SERVICE SIR, but second, as far back as I remember, I ALWAYS thought it was right to treat the soldiers WELL regardless of what I thought of the war itself. They're either drafted or thought they were doing their best. And that's good enough for me. In recent years I've gotten several to bring out their scrapbook and spend hours talking with me about it when even their wives had never heard this story (by their own admission). I know these soldiers know of my love and respect for them no matter what, so I'm pretty sure this was cathartic to tell a civvie this story when they KNEW they were just gonna get acceptance from me. Ain't nothin' special about it. It's just what I would always do.
One of my favorite woods to work with. Thanks.
Love watching you mill! It looks like it some gratifying work! So much so I just put my Order in for the wood Mizer lx 25! Thanks for the inspiration! GOD Bless you and your family from your neighbors in North Ga
Awesome! You'll have a blast!
That's a nice setup.
I'm sitting here imagining the smell of cherry on a campfire. I had some apple branches one time, made me crave some apple pie when I burned them.
Love your projects and your adventures and what ever you can get in free cherry wood it’s a blessing and those boards look good to me and thanks again for sharing your videos and God Bless
Interesting video. Something I’ve never seen before. Next time I buy wood for a project I’ll know how it got there. Thanks for posting this.
Thanks to your father in law for his service. Semper Fi
I love seeing the grain that is awesome to work with for projects!!
I had my WM15 for 8 years, before the farm was sold. What my «mentor» (he was 90 years old, worked the woods in Norway all his life) told me was that those logs, which has such tremendous warp built in - was never cut to boards. They were cut to use as biggest possible construction beams, and when installed correctly - they made sure the building would never sag. Just a tip. I can still smell the wood watching your vids. Keep up the posting. It is like porn to me. Greetings from NOrway.
I have learned more about logging and building from old, woodwise Norwegians than anyone else. One look at the stave churches tells you that these people mastered the art of building with wood. Excellent information!
@@LogHewer Wood has many disciplines or rather used to have. Carpentry is one of them. Many others have been lost, like barrel maker, cobbler, or big wooden spoon maker. Then there's all the wood used for horse carriages, sedan cars, farming tools and of course the lost art of wooden interior moldings, stairs and tools handle.
Wow you sure do go for the best shots with your cameras! Good job. And such a young guy who appreciates the beauty of wood. It usually take almost a lifetime to do such. Keep the vids coming!
Mill saws are incredibly satisfying
Beautiful grain even though a disappointing yield. You still have some nice boards. Good video.
Good morning from Yukon. I really enjoy your video’s. So relaxing. You’ll be able to use the good pieces to make something out of the scraps, maybe a birdhouse. Have a great weekend. Keep up the great work. God bless you and your family.
You know, I have some very pretty boards of different species, but they are crooked, cupped and twisted. With that, I usually save them for smaller projects and just cut out the best sections. After cross cutting and milling to nominal dimension, I still let them acclimate to my shop before investing them into a project.
In particular, I purchased a nice load of poplar from a mill at a very good price that was custom cut for a client that didn't need it all. It's been drying for some time under a shed at the mill. When I ran the first piece through my planer, I was shocked just how beautiful the poplar was! I was used to a greenish tint to every poplar variation in color I had seen. This purchase had black, pink, the typical green and even streaks of light red. Several boards looked just like walnut when "dark walnut" Danish Oil was applied . So you never know.....
Pure poplar sapwood (white) was used as flooring for years. Try cherry stain, it already has grain similar to the ripples of cherry.
I bought the book and you said in your introduction that your father in law won the lottery he must have had a low lottery date of birth number...I was eligible for the draft lottery the same year he was...my number was 316 and I think they went up to about 230 that first year so I did not get drafted. I sometimes regret not going to Viet Nam and at 68 years old now if I could go back in time I would have just enlisted. I is something I regret not doing. I am glad your father in law made it home and I am embarrassed about what happened when those guys came home. I lost 6 life long friends that went and 2 of my best friends came back home pretty messed up they both died very young. Great book so far thanks for your recommendation.
I think his number was 96.
@@falllineridge Yes that is why he was drafted 96 was a low number they went up to 250 something that year ..my friend I was working a summer job together and he with had number 15 and he was in boot camp 6 weeks later...he did not make it and I often think back to that day he found out his lottery number...I still think of that day. Like I said my number was 316 I was not called. I am just getting started on your father in law's book I look forward to finishing the book. Thank you for your channel you remind me of my son who lives in Alabama a hard worker and good person like you.
Either side of that heart there appears to be some quality rail and style material. I would love to make a Cherry cabinet. No Cherry Wood up here in the Pines.
I know your father is very proud of you i can't wait to read his book. Catching up on videos getting kinda old. I.try to watch all of them i always wanted to saw mill or cut lumber cant now doing the next best thing watchig the next best thing. Thanks for bringing me along.
Thanks!
Lovely wood cherry, I have a couple of pieces of furniture that's made of cherry wood. Lovely colour.
Yep,wild cherry is pretty stuff. Cut that rot out and use the good part for trim. I have a wild cherry on my trailer waiting to cut. Cut one couple of years ago..ready to work up. Can hardly wait to get on both projects. Good stuff again...keep it up!
Thanks!
That thing cuts amazingly fast!
Good morning from St John Parish, Louisiana.
Hello!
Good stuff. I cut up a cheery tree in the spring that had fallen in the back yard last year. Now i have cherry wood for the smoker.
I also see you have new uses for the grapple😝. Greatest attachment ever
Wow you sure do go for the best shots with your cameras! Good job. And such a young guy who appreciates the beauty of wood. It usually take almost a lifetime to do such. Keep the vids coming!
Good morning from Yukon. I really enjoy your video’s. So relaxing. You’ll be able to use the good pieces to make something out of the scraps, maybe a birdhouse. Have a great weekend. Keep up the great work. God bless you and your family.
@griff50ify , I do watch him also.
a birdhouse ?! are you kidding, there's enough wood to make furniture. You may want to visit an antique furniture store.
Love your shot-set up from the forest!
The tension you have here is called Timber Bound. I see this in Hickory more than any other any other species. Keep up the good work !!
The water simulates a clear varnish veneer. Cool!
Great job
Good looking cherry tree hope you more .
The ones with rot, you could dry them out and make some small epoxy river looking items
Looking at the cross-section of the cut tree, it is quite hard and beautiful.
Weld a couple of grab hooks on top of your box blade to hook your chain in this will let you left the logs higher off the ground
Like the cherry boards!
Thanks! Good to see you here.
Beautiful Cherry Wood
1st... I really enjoy your videos..Keep up the good work..:)
Awesome! Thank you!
A very nice sawing setup you have there. I have a lot of cherry but unfortunately have been losing a lot to black ants and often bee hives.
Frankly, beyond clearing brush, those grapplers are as my Dad used to say... "are as useless as teats on a boar hog" in the overall scheme of versatility. Typically, with a log of that size or even a little larger, attach the chain just barely forward of the balance point of the log, lift it by the chain from the side of your grappler and slowly just carry it along the side your tractor with the heavy end just barely dragging to keep it pointed in the direction you're headed...no fuss, no muss.
BTW, a simple hook around the log won't slip at all, cinching a chain is never a good idea.
The stress in the log may be due to lying on the ground where it becomes moisture laden much more so on ground facing side. If you have an eye on a particular log, support if off the ground for about 6-8 months to allow it to dry naturally. Likewise, felling a live tree during the winter months when water (sap) has retreated from the tree into the ground makes a huge difference when drying a log the following summer.
The warping slabwood was probably *mostly* due to it drying on the outside more than the inside. If the tree was leaning when growing, that will cause it to have a bit of inner stresses.
I been using Lacquer instead of polyurethane. No yellowing affect. Especially on interior pine.
Last thing I made, a small cabinet, I used poly on the horizontal surface for protection, and lacquer for the vertical. I do like working with lacquer better than poly.
I had a Cherry threatening to fall on my truck. I noticed wood ears growing on it and knew it was toast. Managed to get cutting boards, rolling pins, kneading trough and all kinds of things out of it. After all of this election is over I'll start switching back to permaculture and cooking on my channel. The grain is awesome on cherry though.
If your father would be interested I have a playlist called two battlefieds one war and it is about Vietnam. My best friend growing up was John Paul Vann's youngest son. Mr. Vann was the highest ranking person killed in Vietnam. That dude had a pair and included me in something that was huge. LOL
Another good upload thank Wes! Some nice looking Cherry there even though some of it had some rot. Once those boards have dried (hopefully straight) they would make some fine furniture! A friend here in the UK had a 26" diameter cherry tree that was dangerously close to his new house so it had to come down. He slabbed quite a lot of it up with a chainsaw mill, and despite careful stacking & storage, it warped & cracked in all directions.
I was surprised when you hooked up the trunk in the woods that you didn't put the chain over the top of the scraper crossbar - it would have lifted the end out of the dirt. I'm sure you had a reason for it! Stay safe & well. 👍👍
No good reason, just inexperience. It was really the wrong tool for the job.
Just Grabbed your PopInLaw's book on Kindle. Looking forward to reading it. Thanks for the recommendation 😀
Not a problem with the tractor, you just didn't make the trail wide enough. Just kidding. Great video. Good looking lumber.
Haha, good point!
Cherry is a beautiful wood but very hard to find - and very expensive if you choose to buy it... Nice Job!
Man that saw dust would make an excellent soil fertilizer.
You should drop the back blade down to the ground and run the chain over the top so you are dragging only about a foot on the ground.
I haven't tuned in for a long time. Looks like I've missed a lot! New tractor and a new mill! You ever use the old blue Ford anymore? Great looking cherry, man.
I love working with cherry unfortunately once you find a wind fall cherry you have to jump on it quick because it soaks up a lot of moisture.
The drying process should stop the rot. You can use some epoxy to cover the bad spot and strengthen the wood. It would add some character to your floors
Great video on skiding the log back and turning it into a cant and then sawing it into boards. My wife and I just got our first mill a 40 wide with simple set, isnt it about time to harvest your honey.
Honey is played out for the year. I harvested about 50lb last week, but it was leftover from late spring. You'll love that mill!
Usually with hardwood you cut around the Heart of the tree and end up with a cant. This way you try to eliminate pith in your lumber. I am a NHLA Inspector at Baillie Lumber Yard
You flat sawed the whole log without looking at your boards. Suggest you grade saw to get the most usable lumber. Grade sawing is sawing to the best face. Keep rotating after each cut to find the nicest face. Sometimes a defect will run all the way through on one face.
I have cut a lot of cherry trees down in my day mostly for firewood and in my later years for smoking meats my son and I prefer it over anything else
I think it's better to have the pith horizontal or vertical. Otherwise, the diagonal split breaks up a larger part of the wood going through the boatds.
The water really make a big difference,it is a vey nice lumber!
If you back up to that log and drop the box blade on ground against the log, then hook it over the top ov blade you can get it off ground and out of the dirt!
That is quite some how in that first cut, which got me thinking. If you wanted to play Robin Hood and his merry men, you have just the right piece of wood to make the bows from with all that tension lololol.
Joking aside, the rest cut pretty flat and you have done lovely timber to use once its dried, cracking wind fall, better than firewood.
Ha! It might make a decent toy bow, no kidding.
You had it right the first time. Varnish.
Poly is evil.
Beautiful
Rapaz estou assistindo alguns do seus vídeos aqui e vi quanto e tão fácil fazer tábuas aí.aqui são muito caras cada tábua dessa.muito bom seus vídeos e parabéns pelo seu trabalho.
Nice wood!
I have never seen a private lumber sewer leave so many cut layers left on. It reminds me of my uncle who’s cutting created a lot of friction and tension on his blade. If I hadn’t called about some Mahogany to sell, the blade would of cut his thigh main artery. Just putting it out there brother.
2 questions Kimo Sabe: 1 Why didn't you orient the rot section parallel to the blade? and Are you planning to salvage anything from the lower section of that log? Thanks.
Just didn't think about it. I haven't decided on that lower section yet.
Good morning. I don't care much for the smell of Cherry, however the lumber is amazing. I have lots of them on the farm.they grow like weeds here. I have some as big as 36" in diameter. have a great day. Ron
That's amazing, the ones we have are pitiful.
In cabinetmaking we can counter that tension by finding the right spot and drilling a hole. Unwarps wood. But, then we have to work around that... Also good for restorations with warping. But, furniture has more leeway than structures...
Still watching your videos. Love them. I too might be moving from my 3000 to a Kubota. Just not yet sure which model yet. By the way it looks like you have a low hanging hydraulic hose from your grapple. You might want to hang it up before you hook it on something in the woods and loose your fluids. You might find yourself backing home dragging your bucket.
Yes, I noticed that...I'll try to fix that problem soon. I love my 3000, I used it some today, but the Kubota is a major upgrade in many ways. I do think the 3000 is a bit more versatile with implements however.
Three suggestions.
Use a chain with a slip hook on one end and a grab hook on the other.
Add a hook on the top/back of the box scraper so you can pick up one end of the log to keep in cleaner (saves dulling the band blade)
Or, use a log arch on the tractor. Like this:
pbase.com/jimthode/logarch
I love working
🙏👍👍👍💖
Great video once again Wes. Loved the colour and grain of that cherry. As you only managed to get a few usable boards from this tree, do you dry them and keep them in store until you have more cherry to make a usable amount for use on a project? Best wishes to you and your family. Take care and Stay Safe! Stan
I'll probably just mix them with other species. We are planning on a multi species wood floor for the living room.
Only a real patriot says they WON the draft lottery!!! Thank your Father-in-law for his service!
As a professional sawyer my experience is that most if not all fruit woods tend to develop heart rot of some sort....and are better quarter sawn than flat sawn....but this in turn provides narrower boards and more waste....
Your work is amazing👍👍👍👍👍
Thank you!
I miss your old Ford.
log skidding arch and log skate trailer can attach to the hitch and use a come-along and lift the entire log up to carry.
2 wheels and it is easy to move around. ends that dirt in the bark problem and if you can weld, you can make them yourself.
the board with the rot would make a nice epoxy project.
Please express my thanks to your father in law for his service.
Beautiful cherry wood and all that scrap left over used that for the smoker
Thanks I was wondering if you could use cherry wood for BBQ/smoking.
Good video, awesome looking grain in that timber. Be good for kitchen bench top. Nice work!
Wild cherry makes beautiful gun stocks but it needs to be 3" thick to start.
Thats some pretty wood still. Wood make some killerr planks fir a log cabin porch steps
Very nice. Decent millable cherry in central GA is awful hard to come by.
Yes it is.
hello from Maine the land of woods and Lobster that was once caught in wood...ha !
hey, do you ever or often cut thinner slabs/strips of the lumber you select for mill runs and projects as in 1/2 '' or thinner?
Rock On,
H.L.
Been missing you sawing.
Good video my friend.
Thank you 👍