WHEEL SPEED SENSOR REPLACEMENT (JEEP COMMANDER)

Replacing the front wheel speed sensor on a 2006 Jeep commander. It may be necessary to have the ABS light cleared with a scan tool after performing this repair or you can drive for X amount of miles until it clears itself

[@chrism3188]

Love content creators like this. All the details, all the facts, helpful points, no wasted time on BS

[@omarjames01]

Love your videos, straight to the point. No extra talking , no extra Introduction, no talk about other B.S. I'm a fan brother

[@DifromNC]

Excellent video, I'm a fan, straight and to the point. Now I don't have to pay to do my brakes. Thank you for telling the exact measurements of the tools, freaking genius. Keep up the good work! Thanks again.

[@unforgiven101inc]

thank you so much for being so descriptive on the size of the bolts and how to remove things nobody ever tells you the size of any bolts...💪

[@feltsmartin]

This is one of the best videos i have seen, i really like your format and how straight forward and to the point you are. Thank you!

[@danielfabrizio2778]

Awesome 👍 thanks

[@mmodtomic7119]

Great video. Straight to the point. Thanks for the help. 3 hours in the driveway and $45 later...replaced all 4 sensors and my WK Grand Cherokee is back on the road!

[@KJsProjects]

I don't even own a Commander, but I must watch..
Great vid as always!

[@glennbuskirk]

Well done, no wasted words, Appreciate the socket sizes given, and the advise on the fastener that breaks. The part seems to be the same for left or right, and quite low in price. Wish I had that air tool.

[@SynerG4ce]

I came here for the spicy humor and got clean, information-dense automotive light repair advice, too.

[@ianbestor1528]

Very Helpful. I'm about to do my right rear sensor on my 02 WJ. THanks

[@777firstlovedme]

Great video man. Thank you for the heads up on that bolt that can snap

[@bigbearw2]

Good video my man
all the info in short time

[@Reina.isabel21]

Love this i can def do this myself now!! Thank you!!!

[@wes11bravo]

Subscribed after seeing this + your XK brake job video. Excellent content and production is on point, my friend!

[@BigBand1942]

this is the best video out there thanks!!

[@jeremymontour3943]

Great video!

[@EBIRCSBUS33]

i like the dont tread on me car tag ace video

[@abugarr123]

Thanks dude!

[@michaelgarnett1196]

Good video thanks I think I can see how that wheel speed sensor wire was broken there are new control arms on the vehicle Probably got broken when the new control arms were put in
control arms were installed

[@CarlosHernandez-oe8oy]

Just let u know I new subscriber I like u channel and terrific videos A+

[@sabastian151]

Replaced mine after breaking it trying to remove it with dualistic brand... still have all the lights on. Figured I'd a bad part, replaced with another and same lights on still.

[@williambolton228]

Great detailed video

[@JJPR068]

Great video, thanks for sharing. Did you breaking improve with the cross drilled rotors? Would you recommend it? My Commander is lifted and do take her off road.

[@danielupchurch6024]

A little grease on the sensor, and loctite on the bolt

[@junempis6641]

Nicely done Sir, do you need to erase the code after replacing the Old speed sensor because mine is still flashing on the dash on and off.

[@AmentiProductions]

Dude this was perfect

[@jaysmith5084]

Tubular control arms on a Commander ? This Jeep looks sweet is it a HEMI or 4.7 ? Great work on the ABS sensor install .

[@barricadegarage5361]

This Jeep has the 4.7 and a small lift so those heavy duty JBA uppers were highly recommended.

[@SilvestreVences]

This a damn fine video. Thank you sir.

[@nicholassharp8691]

I notice your lower control arms have been replaced. Were u having a whoo whoo whoo sound when you turned to the left or right?

[@paulmansour4611]

I routed my cable wrong. Stretched the cable and it broke apart. With in 2 weeks.

[@robbinstexas1834]

Good job on the vid!

[@olbinluna4182]

Buen trabajo mi troca creo tiene el mismo problema seme apaga en cada parada o semafaro

[@jomo5611]

Super Videos, vielen Dank dafür!
Which scan tool is recommended for the Commander?

[@barricadegarage5361]

Thanks and a decent universal scan tool works just fine

[@travislyon7880]

Curious, did you ever have the same problem again? I'd say that wire was pinched, or because the Jeep is lifted, the wire was over extended and snapped possibly.

[@theencouragingword5100]

What OBDscan tool did you use?

[@ralphvaccaro2638]

Good job 😀

[@TobinTempleman]

On point, sir ! Thank you !

[@brandonsulak]

Can you do this for the ZJ? Or is it basically the same process?

[@amigopiojo11]

How long should this repair take in real time in a garage and how much I have to pay?

[@justme8467]

I toke my commander to the shop to change lower and upper control arms and now my back up sensors are not working

[@MySexym]

Am having the same problem with my 07 commanders. I had a scan tool on and it reads performance speed sensor it won't go pass 200rpm

[@dorianalexander2730]

Just watching this stresses me the fuck out. X.x why I never try to fix my car myself. I would never get it back together. 😂😂😂

[@2005GMK]

Nice..
But what did you put in the screw?

[@barricadegarage5361]

Anti-sieze compound

[@CarlosHernandez-oe8oy]

I'm also want ash about my jeep 98 jeep grand Cherokee laredo I change the bolt joins and from bars and the abs light come on you know anything about thx

[@barricadegarage5361]

You changed the ball joints? Its possible you snagged the sensor wire or its damaged

[@CarlosHernandez-oe8oy]

@@barricadegarage5361 Im check out thx man 👍🏼

[@steffianchurch9055]

🔥🔥🔥🔥

[@kodacraw5817]

Does any one know if this is the same setup/process on a jeep patriot

[@digitalzeta1975]

My rear window support notches for the gas tubes has rusted off is there a way to replace them?

[@barricadegarage5361]

When I vet the commander back ill check into it

[@iceman213]

🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼

[@ericsalazar3257]

Where u get those upper control arms

[@barricadegarage5361]

jbaoffroad.com/jba-upper-a-arms-for-lifted-wk-xk.html

[@gunklejay]

Torque wrench mia