Yes very true there are a few lanes a little more challenging, but generally just green landing! Will be hopefully some better videos once have moved to Mallorca, has some tricky mountain lanes👍
Hi Been watching your videos you certainly find some great tracks, perhaps in the future we can get together and do some lanes together👍 Regards Martin
Watch those valves. If they get any dirt in them they tend to not work. It's also easy to unscrew the adjustment end and mess up the setting. The P38 is the best.
Hi pal I have a 1994 p38 4.6 v8 HSE Currently has the standard EAS What setup did you get to lift the body? Id like to do the same but keep the air ride aswel I only paid £600 for it as the previous owner thought the ecu was fried but it turned out to be a few corroded wires and bad earths 😂 actually in pretty good condition for the year Black in colour with grey leather, has an log conversion which works perfectly aswel
Hi Sounds like a great deal😀👍 I have been trying to copy my 2inch lift kit which I got from Australia, at the minute having problems getting the right company to do it! I have done video called “Air vs Spring” explaining the lift kit! Will let you know when have kit available. Regards Martin
Hi Chris Thank you for your message! The snorkel doesn’t affect the BECM and the MAF sensor is still operational, it’s just an extension of the air intake👍 Regards Martin
@@all4x451 Thanks for your response. I'm sorry, I phrased my question badly. What I meant to ask is why have a snorkel which allows the engine to run in or under the water when the BECM is below the drivers seat. I mean isn't it going to drown long before the engine requires a snorkel.
Hi Chris That is true if you are in a deep crossing for too long, or the door seals are not very good😀 To date no water has entered the car although I also have extra lift with air suspension which helps! Cheers Martin
Hi Thank you for message. No only traction control at the minute, will be installing a rear Torsion diff at some point similar to Limited Slip Diff! Have recently installed reduced Diffs that will help will low range, can see installation in recent video👍 Cheers Martin
@@all4x451 thanks for sharing. Do you mean you have the factory air bags but set the controller so that it’s normal height is 2” higher OR did you modify the height sensors and the other parts like the shock to support the 2” inch? Thanks
@@datnguyen478 Hi Dat They are Arnott air bags but standard fittment, I run at standard ride hight unless need to change for extra clearance, or lower for of camber! I have a 2inch lift kit especially designed for the P38 form Australia, I am trying to replicate as kit was last one! Cheers Martin
Nice to see the vehicle being used for what it was made for... all be it soft off roading...
Yes very true there are a few lanes a little more challenging, but generally just green landing!
Will be hopefully some better videos once have moved to Mallorca, has some tricky mountain lanes👍
Another top video Martin- nice one. Keep 'em coming.....
Thank you, will do 👍
That p38 is too good for green laning now, future classic especially in that colour and spec, the values are really on the rise.
It was a tough decision but is the best vehicle for the job, and have big plans for her😀👍
Nice vid nice and simple keep them coming!! 👌🏼
Hi
Thank you for the message👍
Regards
Martin
Hi
Been watching your videos you certainly find some great tracks, perhaps in the future we can get together and do some lanes together👍
Regards
Martin
Remember to key the paint surface before appling Rapto...
Oh wait, never mind you've just ticked that box!
😂 thank you for commenting👍
Should be easy prep for sure😀
Regards
Martin
Watch those valves. If they get any dirt in them they tend to not work. It's also easy to unscrew the adjustment end and mess up the setting. The P38 is the best.
Hi
Thanks for message!
Yes have rebuilt EAS a few times now😀👍
Cheers
Martin
Great vid 👌
Hi
Thank you for your kind comment👍
Regards
Martin
Hi pal
I have a 1994 p38 4.6 v8 HSE
Currently has the standard EAS
What setup did you get to lift the body? Id like to do the same but keep the air ride aswel
I only paid £600 for it as the previous owner thought the ecu was fried but it turned out to be a few corroded wires and bad earths 😂 actually in pretty good condition for the year
Black in colour with grey leather, has an log conversion which works perfectly aswel
Hi
Sounds like a great deal😀👍
I have been trying to copy my 2inch lift kit which I got from Australia, at the minute having problems getting the right company to do it!
I have done video called “Air vs Spring” explaining the lift kit!
Will let you know when have kit available.
Regards
Martin
When you have your snorkel made, what do you do with the BECM which is under the drivers seat?
Hi Chris
Thank you for your message!
The snorkel doesn’t affect the BECM and the MAF sensor is still operational, it’s just an extension of the air intake👍
Regards
Martin
@@all4x451 Thanks for your response. I'm sorry, I phrased my question badly. What I meant to ask is why have a snorkel which allows the engine to run in or under the water when the BECM is below the drivers seat. I mean isn't it going to drown long before the engine requires a snorkel.
Hi Chris
That is true if you are in a deep crossing for too long, or the door seals are not very good😀
To date no water has entered the car although I also have extra lift with air suspension which helps!
Cheers
Martin
@@all4x451 Thank you.
No problem anytime👍
What psi do you run for road driving.
Hi
Thank you for your message!
On the road I inflate to around 30 psi, still a bit like riding on jelly but seems to wear tread evenly👍
Regards
Martin
Does the p38 have locking dif,s low range
Hi
Thank you for message.
No only traction control at the minute, will be installing a rear Torsion diff at some point similar to Limited Slip Diff!
Have recently installed reduced Diffs that will help will low range, can see installation in recent video👍
Cheers
Martin
hi! what is the size of the tires?
Hi
Thank you for message.
They are 265 75 R16 insa turbos special track.
Cheers
Martin
where did u get that grille?
Hi
Thank you for message!
The grill is of a Range Rover Sport, but have drilled holes in then countersunk holes and painted!
Cheers
Martin
@@all4x451 wow.. that looks nice.. im still fixing my 2002 p38.. i need new grille 🤣🤣🤣
There you go then happy days👍
Just be careful when drilling as drill flys through plastic😀
how much of a lift do you have?
Hi Luke
I have a 2inch lift, but have air bags still so can lift or lower👍
Regards
Martin
@@all4x451 thanks for sharing. Do you mean you have the factory air bags but set the controller so that it’s normal height is 2” higher OR did you modify the height sensors and the other parts like the shock to support the 2” inch? Thanks
@@datnguyen478 Hi Dat
They are Arnott air bags but standard fittment, I run at standard ride hight unless need to change for extra clearance, or lower for of camber!
I have a 2inch lift kit especially designed for the P38 form Australia, I am trying to replicate as kit was last one!
Cheers
Martin
You need a Jimny.
Lol😂
Thank you ! Well you could be right😀👍
As a weight ballast for the front of the 38 right?
You have a 38, bad luck@@TheAndre8900
Will be getting a front winch fitted soon, not quite the weight of a jimny though!
A Jimny so that you can haul and tow nothing and FLIP EASY on uneven surfaces while looking goofy lol