UTM BY BENDING TEST WITH CALCULATION IN हिंदी

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ต.ค. 2024
  • This video are Universal Testing Machine (UTM) types of stress and test, Perform by bending test and steel material with calculation.
    A Universal Testing Machine (UTM) is used to test both the tensile and compression strength of materials. Universal Testing Machines are named as such because they can perform many different varieties of tests on an equally diverse range of materials, components, and structures.

ความคิดเห็น • 31

  • @phase1eternity654
    @phase1eternity654 2 ปีที่แล้ว +4

    crystal clear experiment done. respect +1 to sir

  • @satyajitmohanty3892
    @satyajitmohanty3892 5 หลายเดือนก่อน

    Sir mera 50x6 mm ki flat ke specification me Bend test- 2t likha hai...ye kya hota hai

  • @prashantilalashettar8288
    @prashantilalashettar8288 ปีที่แล้ว +1

    sir why you did not do the cal of deflection its an important for me

  • @md.taherjamil7039
    @md.taherjamil7039 4 ปีที่แล้ว +7

    y=t/2 not b/2

  • @AnilKumar-qz3it
    @AnilKumar-qz3it 3 ปีที่แล้ว

    Super sir

  • @laxmanmurmu8974
    @laxmanmurmu8974 3 ปีที่แล้ว

    Thank you sir

  • @nitesh8900
    @nitesh8900 3 ปีที่แล้ว

    Very good do for tensile test

  • @aeon5567
    @aeon5567 3 ปีที่แล้ว

    sir ham 90 degree tk he kyu bend krte ha material ko? hamara aim to ye dekhna hana ki material kitna bending stress/load resist kr sakta ha fracture hone se pehle;to 90 pe to wo fracture(break)huwa nahi to hm ispe tb tk load kyu nahi apply krte jb tk ye pura fracture na ho jaye?

    • @classroomdada1868
      @classroomdada1868  3 ปีที่แล้ว +1

      Thanks for comment sir, bending test do not apply facture point asme standard aproce 90 deg normaly bending test ductile metal pey ho tha hey not britel metal value of bending stress kitna load kitna diflaction.

    • @prasenjita.s.sawant7332
      @prasenjita.s.sawant7332 2 ปีที่แล้ว

      @Dil Da Ni Mada friend, how much rate of loading is set on new utm machine for tensile test of a tmt bar??? Pls help... I dont know to set and how much for all tmt bars

    • @prasenjita.s.sawant7332
      @prasenjita.s.sawant7332 2 ปีที่แล้ว

      @Dil Da Ni Mada you mean IS 1608 or IS 786 ...

  • @gaganparashar5976
    @gaganparashar5976 3 ปีที่แล้ว

    Good

  • @anubhaw3322
    @anubhaw3322 3 ปีที่แล้ว

    As per ASTM , what is the rate of movement of jaw for bend test in mm/minute??

    • @classroomdada1868
      @classroomdada1868  3 ปีที่แล้ว

      Sir movement jaw not flow of hydralic presure of cylinder

    • @anubhaw3322
      @anubhaw3322 3 ปีที่แล้ว

      @@classroomdada1868 Kitna speed rakhuga bend test ke liye , like 10 mm/minute when load is applied

    • @classroomdada1868
      @classroomdada1868  3 ปีที่แล้ว

      As per practical experiance

    • @nitesh8900
      @nitesh8900 3 ปีที่แล้ว

      5mm/min

    • @prasenjita.s.sawant7332
      @prasenjita.s.sawant7332 2 ปีที่แล้ว

      Bhai log pls help... How much rate of loading in tensile test for tmt bar is set?

  • @prasenjita.s.sawant7332
    @prasenjita.s.sawant7332 2 ปีที่แล้ว

    Sir, rate of loading kitna set karna hota hai tmt bar tensile test ke liye?

    • @classroomdada1868
      @classroomdada1868  2 ปีที่แล้ว

      Flow rate standard

    • @prasenjita.s.sawant7332
      @prasenjita.s.sawant7332 2 ปีที่แล้ว

      @@classroomdada1868 IS 1608 mein toh nahi diya hai.....kaha se milega har ek tmt bar ke liye aur flat plate ke liye bhi

  • @coolmind154
    @coolmind154 4 ปีที่แล้ว

    Nice

  • @ronikumarpal2607
    @ronikumarpal2607 4 หลายเดือนก่อน

    From where you are getting the load?

  • @Smurff097
    @Smurff097 3 ปีที่แล้ว

    Hlo gcet waloo😂😂

  • @peterpersson1967
    @peterpersson1967 2 ปีที่แล้ว

    Why not write in the language your target audience is expected to understand ????????? It is so annoying and time consuming to see these MANY click bait videos... It should no be allowed... Probably 10000 of your 14000 viewers are visitors who DOES NOT understand this spoken language and was lured to click on your link.... At least place an English subtitle on it....