Samsung washer not turning on - Diagnostic and repair of the main logic board.
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2019
- Parts and tools that I used in this video:
Digital multimeter: www.amazon.com/gp/search/ref=...
Logic board (enter specific part # ): rover.ebay.com/rover/1/711-532...
(These are Amazon and eBay sponsored links. DIY-time Tech is a participant in the eBay Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to ebay.com.).
In this video, I am showing how I was able to troubleshoot the issue with our broken front load Samsung washer. This general approach may also work for fixing other brands of washers and dryers: LG, Whirlpool, Kenmore, Haier, Electrolux, Siemens, Bosch, Maytag, and more. The washing machine stopped turning on possibly after a thunderstorm. It was on the very last month of 5-year warranty and we filed a claim to get it repaired. The tech who came to look at it said it is most likely a fried main logic board. He said that our particular washer has two logic boards and he will order them both just in case. They didn't have the replacement parts in stock and the washe itself was already discontinued, so the stor we bouth it from offere up a full refund, which we gladly took. They also allowed us to keep the broken washer as well. I decided I have nothing to lose and decided to try fixing it myself. I was able to test and find out which of two logic board was bad using a simple digital multimeter tool. I found and ordered a replacement logic board online for less than $100. After I swapped the board, our washer started working again. I hope by sharing my experience I can help someone with a similar issue. And if you are one of those people, please let me know by hitting the like button, subscribing, or leaving a comment below! Share this video: • Samsung washer not tur... . - วิทยาศาสตร์และเทคโนโลยี
Parts and tools that I used in this video:
Digital multimeter: amzn.to/2ZZTUTp
Logic board: rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575132837&toolid=10001&campid=5338592483&customid=&icep_uq=Samsung+washer+logic+board+DC92-01621&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
(These are Amazon and eBay sponsored links. DIY-time Tech is a participant in the eBay Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to ebay.com.).
Are those paper clips you're using to test voltage?
Thank you very much. Your video helped me with my washer and it was the exactly same behavior, tests came up the same, new logic board fixed it.
Thank you so much for this video. My Samsung washing machine just stopped working last week. 1.5 year old unit (uhhh Samsung, really?) Anyways, it refused to power on for no apparent reason. I had a repairman come over and say that it was "going to be about $700 to fix and that I should buy a new one or a home warranty from his company." He spent about 9 minutes taking the top off and pointing to wires and happily took his $129 diagnostic fee. I took a gamble and watched your video a few times. Ordered a new logic board, crossed my fingers and installed. Instant fix. Your wisdom and willingness to share saved me a lot of money. Seriously, thank you.
👌🏻
Awesome, Im glad it worked out well for you!
Mine just didn’t turn on . I think is the transformer . There’s a click when I press on .
@@moisesbecerra8316 mine has the same problem. Mine clicks how did you solve yours
what was it? mine sometimes clicks sometimes doesnt - when it clicks itl turn on and it will start the cycle etc but then it just randomly loses power. @@moisesbecerra8316
Such an excellent and informative video that is to the point and very easy to follow along.
Just wanted to add that this was exactly the same issue I had with the Samsung 6300 series washer that was purchased late 2019. Not impressed with Samsung after only three years of moderate use and it goes belly up!
I tried replacing the front control board but that wasn't the fix. The reason is because I tested pins 4&5 which measured 5V for about a minute and then measured 0V. I thought the front display is on a timer anyways so maybe the PCB board was fine and it's my front display. A new front board didn't fix the issue. It still would not turn on!
Ordered the PCB board of the exact model and works like a charm!
Thanks for this, appreciate your efforts very much!
Thankyou very much. I replaced the board as you suggested. All working. Board cost £65. New Samsung washing machine £550. You saved me £485.
Great job on giving us all the correct testing and diagnostic's steps for the control board. I had the same exact problem but the RED LED Light was not blinking on my board. After going through all your steps, I did NOT have the 5 Volts between pin #4 and pin #5 on the CN7 Connector. I just put a new control board in today and it works now. Thanks again for your video, it was very helpful
Awesome, I am glad this was helpful!
Thank you sooooo much for publishing this video. My samsung washing machine would not turn on too and by using this video as a reference for inspection and testing, I decided to replace the board. $200 for a board and 1 day shipping and we are back washing clothes again! I would like to add that apparently there are 2 different main boards available for these washers, a "3 capacitor" and a "4 capacitor". The video showes the 4 capacitor and mine was the 3 capacitor. This meant that I could not do the exact same electrical tests that you did on mine, but I went ahead and replaced it and It works perfectly.
Appreciate your trouble shooting expertise and very informative to pin point the issue and the required part to replace. 👍
Thank you so much for doing this video! I have the same washer and it did the exact same thing. It would take multiple hits of the power button to turn on, until it didn't. Watched your video, followed your troubleshooting and looked up the service manuals as well. Was missing the same 5 volts DC. So replaced the board. I had to pay $150.00 for mine... I have also fixed the Dryer twice, once to replace a drum roller wheel, and then the heating element as it burnt out. Not impressed with Samsung washers and dryers! So thank you again for posting this and helping me out!
I feel like they don’t built them to last any more. Our drier also gad burnt element, and we replaced PLASTIC rollers on my parent’s washer twice already! For that reason we always buy extra 5-years warranty now.
Im glad this video has helpful and thanks for your kind words!
Nice!I need new washer.Very helpful tips.Thanks for sharing
Great Video.. Tried this procedure, tested all suggested voltage pins.. I had incoming 120 volts, but did not have the correct 12v, and no 5v coming out.. Ordered new board on line. Install new board with fingers crossed.. AND WOW unit now works, wife is so happy.. Thank you for this perfect diagnosis video.. Great Job Bro..
Awesome, glad to hear that!
The Amazing video very help full .Thank you
VERY GOOD 👍 👏 MUCH EXPLANATION 👏 👌 GODBLESS
Glad I found your video, my 3 year old washer had no power so i ordered a new board for $214 Canadian delivered. Up and running again. I was impressed how well the Samsung is put together and the parts look very good, but as most things today the electronics are a weak link
Glad it was helpful!
Mine too 3 year old Samsung washer won't start at all.
@@DIYtimeTech can you please help me? My Samsung washer was not coming on and I replaced the board and came on and we started washing, then stopped after 15 minutes of work and never came back on,fuse is ok ,but don't know what else to check
hey any chance you could point me in the direction of whats up with my ecobubble? so its started to not turn on OR when it will turn on, it will start the cycle etc and then 5 or 15 minutes in just randomly dies as if i have pulled the plug out the wall - now i know when its going to turn on because when i switch the plug socket on i can hear a click and i know it will power on BUT until i hear that its dead to the world, any ideas???@@DIYtimeTech
I have the same one, 3 years in and it won't turn on...wouldn't recommend a Samsung to anyone
My washer just broke. I wish i had time to fix it like you did. Good job man
Thanks!
Thank for this precious guide, it helped quite a lot. in my case it was the wifi module that caused a short circuit. Unplugged it and the washer started as there had never been a problem.
Thanks!
Where is the wifi module mine has same problem
Nice man! You didn’t save $500, you made $500 ;) lol
I guess, depends how you look at it! 🤓
thanks i'm having same issue and was about to dispose of my washer, gonna dive into this repair.
Thanks for the info
I'm working on one tomorrow with the same problem. A lot of times you can look at your transformers on the boards it will at least give you your voltage in AC are DC . Then you just need to know your testing location. A lot of board now have DC volt transformer. Good jobs thanks
👌🏻
Thank you. Saved me hundred$. BTW, your links go to the wrong part. Make sure you compare the actual sticker on the board with what you are buying - I bought the non-returnable wrong one.
Yeah, I think depending on the features of each individual washer, the main boards will have slight variations. Always compare the model number.
Thank for the walk through.
Thanks for this video, I noticed that when you turned it back on number 59 was displayed, I got to that point but I cannot get the washer to operate. Any ideas?
Today suddenly my washing stop working...dont know how it happen?
Great video wish i could do mine
@DIY-time Tech - thank you for the great video, i have the same issue as you have illustrated. This was very helpful.
Great to hear!
I LIKE VERY GOOD SOLUCTION
Thanks!
Iv got 7v between pin 4 and 5. I'm not sure how to determine if the user interface board is broken and drawing too much power or if the main board is broken and sending too much power.
Also I think 7v is high enough over 5v to damage the user interface board.
Any ideas?
So have you repaired the old pcb which have no 5v output between cn 11 pin 4 and 5?I have a dc92-01621d same symptom with yours.It also have no 5 v in pin 4 of cn11.
Professionnels👍
Thanks!
Great troubleshooting description. Do you have source for where I can find a detailed owners manual like the one you're using in the video? I have the exact same problem, washer won't turn on.
I used manualslib.com
Is this the board that would probably fry if my house was hit by lightning? My washer lets in water for a couple seconds and then stops and thinks and then another couple seconds and stops and another couple seconds and stops and then I get the rolling lights on the display. I replace the water inlet valves and that didn’t fix it. So I’m thinking it’s probably this logic board that controls when those open and close?
Awesome!!!!
Thanks!
Went shopping for washers at one point on this journey but replaced the main board on my 5200 much like yours and saved a bundle. Thanks much!
i never replace them boards its more fun repaing them done loads
Nice! I was hoping to do that too, but wasn’t able to see any visible signs of damage, so I wasn’t sure where to start. Do you have a video on how you do it? Would be interesting to learn that!
I'm in the process of doing this exact thing. I have new main control board, display board & "coil harmonic" parts. My issue is I don't know where to locate the coil harmonic part # DC26-00009T. Any advice?
Nice job. Did you happen to go back and find what happened to the 5 volts on the board?
No. The board didn't have any visible signs of damage, so I wasnt sure what part was broken. Plus it was filled with silicone to protect from water & moisture, so it would be pretty difficult to work on it anyway...
I have different control board. Incoming voltage to the board between pin 4 and 1 are 5 volts. Pins 3 and 4 has 240v. What does that mean?
hiya, thanks so much for this info. Trying to diagnose my washer (same samsung unit that isn't turning on, but does have a click from the relay when I press the power button), and looks like there's 120VAC to the main logic board CN7 providing good 5v and 12v power. Where did you find the service manual? Any ideas on next steps to diagnose? Not sure which board to get, though figure it's one of the three at this point.
There is a web address that I used shown on the screen @ 4:25 mark in this video.
in case it helps anyone else... I ended up getting a replacement main logic board (DC92-01803D) from ebay. Popping in the new logic board was easy and resolved all issues (intermittently would not turn on)
Great, thank you for sharing!
@NoTanFightFan I took a shot in the dark (and kind of an educated guess), and it worked for me. Your issues sound different, but the main logic board would be a good first target--certainly a lot less expensive than paying for a tech to come out and the high price they charge for them to pop in a board. Good luck!
mine is randomly turning on after i try turn it on about 20 times an then itl stay on for a bit an start the cycle and then just dies loses power and wont turn back on for a bit - any idea what it could be? i know when its going to work because i hear the click when you turn the plug socket switch on - and until it makes that click its dead. @@wesleyryan8543
Can you say the web site where you found the board description?
Where do you find this level of detail in the manual. The User Manual on my WF45M5500AP/A5 has no technical specs at all. Help!
4:24
I found good detailed diagrams online.
I couldn’t find my Samsung dc41-00161a service manual no page to download :( same issue stopped working and seems main board damaged no led light at all not sure if all Samsung main board has it was machine is wf1802xec
Hello sir thank you for your wonderful video I have the same problem with my washing machine. But when I try to click that you provided to order the logic board I don’t know which one to order? Can you please kindly send website I can order the specific logic board thank you very much sir
There is no way I can tell you what to buy. Every washer is different. Type in the exact part number found on the circuit board in the search.
My samsumg washer makes a sound when I push the main button to turn it on, but it doesn't start. if I keep trying for 100 times, sooner osr later it misteriously work 1 time out of a 100 tries. What might be the issue here?
In my case on this machine wf42h5000 the control panel works but washer don't fill or spin and on the panel looks like is working fine
did you find the solution to this?
@@curtisfairweather1968 yes sir. The problem with my ended on bad drain pump because i never heard if working or not so i tested with voltmeter it has voltage but no working . I buy a new pump from ebay DC31-00178A and it works
I have this washer but I just want to know what is the voltage? Is it 110 to 220 or just 110?
Mine is 110.
Have a similar Samsung front loader that will start but will not complete a cycle sometimes fills some not. Counts down rapidly and shuts off . Sometimes makes clicking noises. Does this sound like a logic board problem??
Yeah... this is what happened in my case.
hi sir were' can I get lg fc1007s5w fullyauto washingmachine inverter pcb diagram please.
Hi replace my old board with the new,the machine turn on a little then shuts off,there is a clicking sound in the mc board when attempting to turn,then I have to unplug the machine plug in and try again but no progress
Did you find our what was wrong ?
Hi did not find out what was wrong
The machine still isn't working
So I replaced the control board and I was getting a constant clicking sound coming from the control board. It then stopped all together??
Sounds like a relay crapped out.
Hello, can you provide me with the diagram? pleaseeee
HELP! I have a Samsung Front Load Washer (Model WF365BTBGSF 4.1 cu ft).
Initially the machine displayed an error code (AE). I reset the machine. Removed the power cord and let it
rest. I also reset the electrical breaker. It started back up and ran for the five minutes and shut down. The AE code no longer displays - the machine display simply goes blank and eventually powers down.
The AE - fault code indicates a communication issue of the washers main components. I opened the machine,
inspected it and decided to replace the main control panel (DC92-01527C) - RESULT: NO Change
Machine started up initially but powers down after 60-90 seconds. I continues to do this, provided it is
unplugged or the electrical panel breaker has been turned off (removing all power to the machine) for an extended period before turning it back on.
My sense is there is a capacitor somewhere that needs to be replaced. I saw two small capacitors on the main board but my guess is they regulate power to the components on the PCB and there must be another regulating the motor.
You can try to find a specific diagram online for you washer PCB, and check if getting correct power.
If not, look for any visual signs of blown capacitors.
Did they have you cut the cord? They want me to send a picture of the power cord cut
No, I didn’t have to do that.
Why would they ask for it?
What were your symptoms? My display board is flickering off and on. Then it stops altogether.
It would stop in a middle of a washing cycle and not turn on for hours or even days at first. Then it stopped turning on altogether.
@@DIYtimeTech I have same problem flickering off and it keeps continues.. Not sure this is due to the PCB board. Please advice.
I have a clicking sound sounds like it’s coming from the board
Update: my clicking sound is coming from a relay. I had 120volts to that relay as tested in the first step so not sure why the clicking
@@DIYtimeTech I have same problem with mine too.
Where did you find the board and what is the model of your washer?
I left a link in the description for the new board.
So that meens the same is going on with mine thin
Where find the technical diagrams and schematics. Can not find online
I used manualslib.com website.
How did you work out which board to get? my model number is very different to yours (WF756VMSAWQ)
I found bought the same exact part number as was listed on my old motherboard.
I need help! all my voltages are correct after i have replaced everything (both boards in the back, the board behind the display and the display its self) and my screen still will not turn on. i can here the relay click when i press the power button but the display does not turn on. i also checked all my voltages to the display and they are the correct voltages. Getting real close to taking the washing machine to the gun range at this point. Has anyone else had this problem? If so any solution?? Thanks in advance.
My samsung washing machine only sometimes works. Wont turn on one day but the next day it works again. I can continually do loads of washing during the day but once I turn it off...that's the end of it, no power again
We had similar symptoms before it went out for good. It was also shut off during washing cycle sometimes.
My machine won't turn..what could be the problem?
Can you please share the owner manual pdf please
Any soldering involved? Or is it just plug n play?
Was just plug and play for me!
@@DIYtimeTech awesome thank you.Ill be installing it today as soon as it cones in.
👍🏻
@@DIYtimeTech Installed and washer works great now..thank you sir!!
Awesome!
Anybody could help me?
My Samsung was not turning on and I replaced the main board, worked like 15 minutes, stopped and when off again,like was before,I don't want to buy another board,cause may do the same thing and those are expensive,any ideas?
Hi
How can we find the logic board diagram?
I used manualslib dot com website.
is the power button broken
Not really.
How reset my Samsung dryer
My washer don't start working what can be the problem
No power, or bad logic board.
Do you hear any click noise ?
im glad i already have another washing machine.
Samsung sucks in terms of washing machines they are unreliable even though websites suggest they aren't
My mom had a miele for 16 years and guess how long this lasted? not even 3 years.
absolute rubbish just get a better brand this is more of a toy
I think they are all the same nowadays. Everything is cheaply made so you are forced to buy a new one. Our broke twice in 5 years. I lost count how many times my dad repaired his...
Mines not turning on aswell..ive only had it 3 years...im never getting a Samsung washer again
I feel like they are all designed to fail around 3 years.
I always buy 5 years warranty for $100 extra, and I used it EVERY SINGLE TIME around years 4-5.
Got new fridge, new washer, and dryer was repaired 1 month before warranty expired.
@DIYtimeTech seems like a money making scheme by these companies. Washer is working but the digital panel has gone. Home contents insurance aint covering faults either 😒
My dryer is the same as your washer it stopped working
My drier also broke before. It was still under warranty. They replaced the heating element, it was broken and wasn’t heating up.
Oh
Washer wont turn on, when i press the power button theres a click
Same problem
so you are telling me its broken. im not going to sit there with no fkn knowledge of circuit boards and rebuild one.
CLICKBAIT! You did not repair the logic board at all. You replaced it with a new one.