Morimoto 370Z XB LED Headlights Install
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Welcome back guys! Today we add a little different look for the 370Z. Back in April we put in our pre order from Z1Motorsports and today we put them on the car. Welcome to our new look with the Morimoto 370Z headlight upgrade!!!
Z1Motorsports:
www.z1motorspo...
FOLLOW US ON SOCIAL MEDIA!!!
www.instagram....
/ 905streetkings
905STREETKINGS
Music: Lullaby - Yung Logos
THANKS FOR STOPPING BY!!! BE SURE TO HIT LIKE AND SUBSCRIBE FOR MORE CONTENT!!!!!
did you have to cut a hole on the fusebox lid when you plugged in the DRLs?
Yeah, we cut a slit big enough for the wire to come through. It doesn’t close flush since we only cut the lid but I’ve had no issues, bottom and side clips close enough to keep it snug
Did you have to cut and extend drl cable to reach fuse box?
Nice! I just installed mine last week and I have the same color car! It looks great, but noticed I’ve been blinding everyone since the bulbs are aiming high like high beams. Did you notice that with yours? I gotta figure out how to fix that now...
I had the same problem. The adjustment screws are the in the rear of the light housing, you want the top one for vertical. The lower adjusting screw is for horizontal. You turn the screws clockwise to lower the vertical beams. Before you begin turning the adjusters I would mark them with a white marker at the top (to know your starting point). The instructions say not to go more than a full three rotations (i.e. 1080 degrees). You should be able to reach these screws with your hood open. I had a little trouble getting the driver's side screw due to my supercharger and it's clocking position. I had to purchase a very small sewing machine screwdriver from Amazon that let me get in to the tight spot. You should be fine though.
yeah my first drive at night street signs were lit up like a Christmas tree. Luckily I don't drive at night enough to worry much about adjusting them
Yeah, I figured out how to adjust them, but failed at doing so. I started to mark up the wall in the garage at 3’ away then realized I had to back up 25’ of space that I did not have to adjust them correctly. I know I got them to point down enough, but I’m sure I don’t have them evened out or low enough. I guess I’ll find out soon when I drive at night again. Haha
ghettogunfighter
Thanks
Omar M. Ya I’m going to get them done at a shop