The Mylar on my F-15 is bubbling, how can I repair? My playfield looks great, it has been a HUO only pin, but my OCD can’t handle the Mylar bubbling, I have to fix it.
hahaha. 7:57 „now look at this light show“. Still can‘t get over the fact that it‘s the crippled-down later F14 model light show that‘s so much worse than the real thing. Do revert the Service Bulletin, restore the original light show.
Loved playing this game as a kid! Question about LEDs - dont they light up faster than a traditional bulb? Is that harsher on the eyes, or is that accounted for somehow?
@@tntamusements ok, I'll look into those decals for sure. One thing, my ball doesn't go up the shooter ramp nearly as fast as this one. I added a missing sleeve which helped. Do you have any recommendations? Many times the ball comes backwards down the ramp and gets stuck above the shooter rod and I need to take the glass off to get the ball.
@@tntamusements thanks, i was able to support it on the support bar inside the machine. There are 2 wing nuts that allow the pcb board to pop off to access those lights. Unfortunately, now I've hot 2 flashers on it 1, 5 that don't seem to be consistently working. Reflowed solder, checked for broken lines, changed all bulbs, out of ideas, other than if the actua 2l sockets might be bad?
@@tntamusements They were replaced regularly with some of the greats of the late 80's and early 90's like Earthshaker, Diner, and FunHouse. I didn't know it at the time but I witnessing the start of Pat Lawlor's pinball career.
Great vid (as usual of course)! Have two Tomcats myself (one complete and the second needing some parts); one of these days I can afford to give them the attention the properly deserve. Learned something new with this video; you CAN use the power supply board with the H.V. section depopulated *with a LED display of course* :)
Hey Todd, yet another great pinball machine. Also, great comedy on roadhouse. It's very interesting what you are doing to LAH. It was in sad shape, please show before and after. I've had a glimpse from your other videos. I'm look forward to seeing the vids. BTW, something interesting about LAH that no one ever mentions. If that were a new Stern today, it would be a limited edition with the shaker motor, magnets...ect. It's amazing that it has 13 modes and a wizard mode. It's too bad that Arnie's big fat head is on the back glass. It would be a really good gag if you put a paper printout of your head or one of your employees over Arnie's. Lol...it would be an improvement. Atlantis looks really cool, it played well when I tried it in your showroom last year. Thank you for spending the time making the videos!
Another collector made a new backglass with my face on it...that will be incorporated into the LAH video!! So we already are thinking ahead!! LAH is PACKED with stuff...loaded to the gills with effects!!!
To Get The Fighter Jackpot: Spell T-O-M-C-A-T to light the Locks. Shooting the Landing locks the balls. Once three balls are locked, shooting the locks starts Multiball. During Multiball, shooting the locks scores a Landing. The third Landing collects Jackpot. After the Jackpot is scored, all shots to the locks scored 150,000. The Special is lit on the second Multiball. Shoot a lit outlane to collect the Special.
I help you to remember in multi ball there are three red lights they are you enemy's you must go right top corner then lights will turn blue and said she you made a safe landing if you get all three ball in the top right corner you will get a fighter jackpot.
Looking at the Road Show in the video, I think I managed to snap up the last NOS of the yellow rubber "wall" on planet Earth for the barricade that's in front of Ted, and that was ten years ago. :) Has anyone made replacements since then? (I sold old Red and Ted ten years ago). All the Road Shows get that black stripe across Ted's barricade, that at first I thought was just dirt, but then I thought maybe Williams later released a version of the wall with a black stripe to cover up the dirt/wear. But I've also seen pictures of what I can only assume to be sticker overlays that are striped at perpendicular angles. I remember changing the rubber barricade was a pain in the ass to get to, and that mechanism always had problems. BUT, the rubber barricade was the way to go as it at least absorbed some of the impact; with the impact registered with optic sensors, as it was the most hit thing in the entire game. On a similar note, I played Stern's Tron yesterday and WOW, the recognizer barricade just simply sends the balls flying all over the place. Then the balls (plural) got stuck in the dimple when the recognizer wall went down, and no matter what they wouldn't dislodge; even with the computer raising and lowering the wall. I had to tilt the game.
todd! great pin and video as usual! i have to ask you a serious question that all of your fans want to know the answer to. do you still plan to release "Sea Wolf Guy 3"...? i hate to bug you about it, but we're all curious. it doesn't matter if it takes another year...just tell us it's on the way!!!! :) billy
I tried to make a ripoff of this machine named f-16 thunderbird and it had a similar theme. However, it was too hard to make and it's sitting in pieces.
so why are their big ball jokes :P as I accidentally said the F word in front of a kid while talking to a former coworker eh his favourite word anyway.. and wheres that discs of tron or is that disks of tron before CD's mucked up the spelling??
Played this back in the day holy crap its intense.
F14 Tomcat is such a nice machine. Was great to see the short walkthrough of it
Glad you enjoyed it!
F-14 Tomcat was my favorite pinball of the 80's.
+Daehawk :-)
The Mylar on my F-15 is bubbling, how can I repair? My playfield looks great, it has been a HUO only pin, but my OCD can’t handle the Mylar bubbling, I have to fix it.
My favorite from when I was 18. Thatthing had a hellasious kicker or thumper in it. Youd think it would break the glass.
Glass is tempered so that cannot happen!
I do agree, that is a nice light show on the Tomcat. Atlantis looks like a fun pinball game.
WARRIOR4CHRIST70 KZ4LIFE Yes...another beautiful game ready for its new owner!
hahaha. 7:57 „now look at this light show“. Still can‘t get over the fact that it‘s the crippled-down later F14 model light show that‘s so much worse than the real thing. Do revert the Service Bulletin, restore the original light show.
another great video thanks Todd. hey, that roadshow playfield looks in awesome shape !.
Thanks John!!
Loved playing this game as a kid! Question about LEDs - dont they light up faster than a traditional bulb? Is that harsher on the eyes, or is that accounted for somehow?
for sure, thats why i only use traditional bulbs or ocd board. that fast flickering, not so nice..
Mine has factory Mylar too, but I'm worried that if the letters come off of the inserts, how do I deal with that?
Jeff at Classic Arcaes sells those decals...use a heat gun to remove mylar...but consider keeping it
@@tntamusements ok, I'll look into those decals for sure. One thing, my ball doesn't go up the shooter ramp nearly as fast as this one. I added a missing sleeve which helped. Do you have any recommendations? Many times the ball comes backwards down the ramp and gets stuck above the shooter rod and I need to take the glass off to get the ball.
@@tntamusements is there a contact phone number for classic arcades? Not sure I'm seeing the correct place.
How do we access those red flashers on the back wall of f14 Tomcat?
You have to lift the playfield out of the machine to get to them...a real pain
@@tntamusements thanks, i was able to support it on the support bar inside the machine. There are 2 wing nuts that allow the pcb board to pop off to access those lights. Unfortunately, now I've hot 2 flashers on it 1, 5 that don't seem to be consistently working. Reflowed solder, checked for broken lines, changed all bulbs, out of ideas, other than if the actua 2l sockets might be bad?
cold be bad sockets...but you can try cleaning them with emery cloth
@@tntamusements ok, I'll give it a try. Can't hurt.
Any trouble on the display at 3:50 or is it normal?
You must have been watching with the volume off!!! I am pressing the test switch that shows all the digits displaying.
That's ironic. In my freshman year, my college's lounge had Space Shuttle and F-14 machines next to each other and in that order.
neat!!
@@tntamusements They were replaced regularly with some of the greats of the late 80's and early 90's like Earthshaker, Diner, and FunHouse. I didn't know it at the time but I witnessing the start of Pat Lawlor's pinball career.
Yes...and now he has done Willy Wonka!
I wish you guys could work on my F-14...what's the best method for removing mylar on this one?
+Ill06Taco I think some collectors did videos on it....we lost a bunch of footage last month filming one....will do it again one day!
+TNT Amusements Inc Awesome. Also, do you sell those lexan washers for the plastics separately?
Can u turn off the top lites?
you just unplug the one plug that goes to them
Oh Gods. Red & Ted's Road Show. Only ever played that once and the heads freaked me out.
The video will have some detail of the inside of the heads!
Great vid (as usual of course)! Have two Tomcats myself (one complete and the second needing some parts); one of these days I can afford to give them the attention the properly deserve. Learned something new with this video; you CAN use the power supply board with the H.V. section depopulated *with a LED display of course* :)
YES! You can always learn something new from many of our vids!
I want the next F-14 that comes in!
Hey Todd, yet another great pinball machine. Also, great comedy on roadhouse.
It's very interesting what you are doing to LAH. It was in sad shape, please show before and after. I've had a glimpse from your other videos. I'm look forward to seeing the vids.
BTW, something interesting about LAH that no one ever mentions. If that were a new Stern today, it would be a limited edition with the shaker motor, magnets...ect. It's amazing that it has 13 modes and a wizard mode. It's too bad that Arnie's big fat head is on the back glass.
It would be a really good gag if you put a paper printout of your head or one of your employees over Arnie's. Lol...it would be an improvement.
Atlantis looks really cool, it played well when I tried it in your showroom last year.
Thank you for spending the time making the videos!
Another collector made a new backglass with my face on it...that will be incorporated into the LAH video!! So we already are thinking ahead!! LAH is PACKED with stuff...loaded to the gills with effects!!!
Do a video on the fixing if a shuffle alley - "Understanding Shuffle Alleys"
one day that will happen!
How to get a special on tomcat and get a fighter jackpot and get lunch 150 thousand points bonus ?
+Nic Cereghino Boy, I do not remember...
To Get The Fighter Jackpot: Spell T-O-M-C-A-T to light the Locks. Shooting the Landing locks the balls. Once three balls are locked, shooting the locks starts Multiball. During Multiball, shooting the locks scores a Landing. The third Landing collects Jackpot. After the Jackpot is scored, all shots to the locks scored 150,000.
The Special is lit on the second Multiball. Shoot a lit outlane to collect the Special.
COLEY FOLEY TOTALLY: DOMINATED THAT GAME... HAHAHA!
I help you to remember in multi ball there are three red lights they are you enemy's you must go right top corner then lights will turn blue and said she you made a safe landing if you get all three ball in the top right corner you will get a fighter jackpot.
It was challenging to me
Looking at the Road Show in the video, I think I managed to snap up the last NOS of the yellow rubber "wall" on planet Earth for the barricade that's in front of Ted, and that was ten years ago. :) Has anyone made replacements since then? (I sold old Red and Ted ten years ago). All the Road Shows get that black stripe across Ted's barricade, that at first I thought was just dirt, but then I thought maybe Williams later released a version of the wall with a black stripe to cover up the dirt/wear. But I've also seen pictures of what I can only assume to be sticker overlays that are striped at perpendicular angles. I remember changing the rubber barricade was a pain in the ass to get to, and that mechanism always had problems. BUT, the rubber barricade was the way to go as it at least absorbed some of the impact; with the impact registered with optic sensors, as it was the most hit thing in the entire game. On a similar note, I played Stern's Tron yesterday and WOW, the recognizer barricade just simply sends the balls flying all over the place. Then the balls (plural) got stuck in the dimple when the recognizer wall went down, and no matter what they wouldn't dislodge; even with the computer raising and lowering the wall. I had to tilt the game.
That rubber does get that stripe! Bay Area Amusements sells this rubber new!!
todd! great pin and video as usual! i have to ask you a serious question that all of your fans want to know the answer to. do you still plan to release "Sea Wolf Guy 3"...? i hate to bug you about it, but we're all curious. it doesn't matter if it takes another year...just tell us it's on the way!!!! :) billy
Sea Wolf 3 will have to be released as A, B, C, D, E, F...as its 75 minutes long...Part 1 was 6 minutes and part 2 was 8 minutes! Its a mess!
funny crew working there offending lol
We all have a good time here!!
Great!
I tried to make a ripoff of this machine named f-16 thunderbird and it had a similar theme. However, it was too hard to make and it's sitting in pieces.
Yes...its alot more work than anyone can imagine!
It is and I'm not gonna finish it anytime soon
F-14's the best
many fans of this game
so why are their big ball jokes :P as I accidentally said the F word in front of a kid while talking to a former coworker eh his favourite word anyway.. and wheres that discs of tron or is that disks of tron before CD's mucked up the spelling??
Discs of Tron is coming, when the side art arrives!