Know you know Baz, and we all do it, but for those watching, consider some specs when drilling above head height, a trip to A&E to get swarf out your eye is even less fun than for stitches, ask me how I know 😂
Had a bimmer in today for work - I've serviced a lot of cars, never seen an oil filter coated with a solid, toffee consistency layer of hardened oil, 5mm thick, all over the filter. Took a screwdriver to dig down into it to get to even see the filter paper. Zero oil was passing through that filter. Nada. Dropped the "oil" & it was the consistency of tapioca. All 3 liters of it. Going by the drain plug, the filter housing & just general nouse, I reckon that this car had never had an oil change since new. 140k km on the clock. Service book all stamped up to date nice & purty... Brakes were in no better state. A lot of garages out there pulling peoples plums IMO, Baz - they get the bills, but not the work done. You will know this yourself.
its funny,all the times ive worked on my vehicles ive removed the negative cable from the battery,i never thought of just taking off the earth cable off the firewall..much easier to do,thanks,learn something new every day..
Baz great video and presentation, you’ve blown us all away with your quality services, just wish people do proper maintenance on their eco boost engines ,💪❤️
Great job Baz, about time we saw one that needed doing😁. Camshafts and lifters all good confirmed by the Singer Standard Aural Test, sometimes we use a mouse's heartbeat as a reference when the sewing machine is out for calibration😆😆. And the oil pressure light went out instantly, good call on the new pump. Your customer just got away with that!
Saved another one. Baz, in a situation like this will you be having a friendly word with the owner about maybe changing the oil a little more frequently or do you not bother?
CRACKING JOB THERE BAZ YOU LOOK BETTER WITH YOUR GLASSES ON I HEARD WET BELTS ON FORD ARE A NIGHT MARE MATE HOPE YOU HAD A GOOD WEEKEND ON YOUR BIKE 🏍 😀
I think the extended service intervals of 18000 miles between oil changes does not help with the wet belts. I use the Ford labelled Castrol 5w20 every 12 months and I am only doing between 4000 - 5000 miles a year but mainly short journeys. Hopefully this will delay the inevitable failure as long as possible.
Great save Baz, loving the time lapse, just wondering if you've thought about a mic, as sometimes when you put the camera down and explain things its difficult to hear you. Keep up the good work mate🤙
I have a 2013 Fiesta Econetic, is there anyway to checking if the wetbelt has been changed, bought at 95k. It's now on 120k. It's had services every 10-12k miles, so I'm hoping it can make 150k miles. Is 150k possible on the original wetbelt
Just found you channel and i feel like I'm already a wet belt expert 😂 one question what's up with the accent and the the steering wheel on the wrong side though 🤔🤔🤣🤣 on a serious note why would you get rid of a dry timing belt??? Ford WTH falling apart at 60k
Baz weren't you tempted to remove a mains or big end cap to inspect the shell bearing's. I would of thought by doing this you would know if it was worth proceeding with the job.
So much work if they used the same Cover as the Eco blue it would be simple And machined in a Keyway in the crankshaft using half the Torque needed on that bolt holding the pulley, And must have known about the fibres in the sump strainer ,That sump should only be a max 1.5 hrs work and half a Day ,Such bad Design 2 extra oilseals and the Belt could have been Dry and moving the oil pump on the front of the crankshaft same as the Zetec Cvh Which should have a Keyway fitted 3 pins locking the timing job done, No wonder I Now Drive A Hgv 😂
Ive been watching all of your ecoboost timing belt videos. Great job mate, thanks a lot. Im considering doing the job myself to be honest, feeling quiet confident after watching the videos. Keep up the great work. Just wanted to ask, where i could get the repair manual from for me to have the step by step guide and torque values etc. And what part number does the torque converter have you use on the crank pulley? Is it advisable to change the oil and water pump while already there? My car has about 150k KM on it. Or any other parts while already getting everything off?
You work on these engines a lot can you tell me if it’s normal on a cold start (1st start of day being sat overnight) for the engine oil light to stay on for 1-2 seconds after starting, all other starts during the day it goes out instantly
Just subbing to the channel looks interesting , I don't want to tell you how to suck eggs but please wear. Eye defenders when drilling , could save you a very painful eye injury , I've been there 👍🧑🔧
What is the miles of that car? I don't see many 1.0 eco boosts in the UK. Ford engine goes badly later than 2012 models. Who the heck designed a rubber belt soaked in oil?
Baz, in your last wet belt video and this one too, you took off the vacuum pump to clean out the filter which was also full of belt material. Assuming removing that is a much easier job than dropping the oil pan, is the vacuum pump filter state a reliable indicator of belt health?
@@bazmeredith had a mk3 escort cvh went like the clappers Where’s your workplace baz ? Wales ? If I need any work doing that’s why I’m asking your great at what you do 👌
Hi baz y do you put oil over the cams before you put the cover back on i was always told this wen i was a lad i am a old x mechanic now well done mate 😂😂
I have a fiesta 1.0L ecoboost. It is about 10 years old and has done just over 73k miles. It has never had a wet belt replacement but it has also been properly looked after. All services done on time, only ever taken directly to Ford for servicing. Only ever had the officially recommended oil used on it. Even for small things such as new heat shields, the work has been done only at Ford garages. What are the chances my belt is bad? I could not afford to get a replacement but that also means I couldn't afford to repair if it is bad enough to go 'boom'...
I wouldn't like to say sorry if I said it was good and it failed I'd have given you wrong advice and made me look bad, but any doubt by yourself please get it changed
Baz, there's also a mesh strainer in the "Oil Pressure Control Solenoid" that can block with wet belt debris. This solenoid is on the rear of the engine block, beside the plug where the crank timing pin screws in. There's a Dayco instruction video on TH-cam "Garage Wire" Channel showing this solenoid being removed to check and clean the mesh strainer.
@@offbeatwarble I only know about the mesh strainer on the Oil Pressure Control Solenoid of the Ford 1.0 litre Ecoboost engine. I don't know anything about the 1.6 ti-vct Sigma engine, if it has similar filters or where they might be located.
Nem kell megvárni míg kigyullad a lámpa, endoskop kamerával a kieresztőlyukon keresztül meg lehet az olaj csere alkalmával nézni a szűrőt és ha fel vette a koszt, akkor szíjat kell cserélni
They are covered up to 10 years 100k for wet belt failure. Car needs full service history dosnt need to be ford dealer service history, year 2020 is allowed to be missing due to covid, and you get 3 months leeway either side of the service due dates to be covered. Obviously we don't know the service history on this car to determine that.
@derekfleming3095 my mistake lol you are correct 150k up to 10 years on the same action notice, Ford mentioned a reduction on change interval for the transit wet belt going from 150k to 100k. I knew there was 100k in there somewhere lol
Super knowledge you have on these engines. I am at the moment stripping one down due to the piston skirt snapping off of the bottom of piston 1, and hopefully changing the belts on a 14 plate. Has full service history and other than the skirt problem it is clean as a whistle with no belt debris to be seen. Anyone had the same problems with a skirt snapping?
Good save Baz, that was proper blocked, loving the time lapse, we get to see you taking things off, although we do like a little bit of magic when it puts itself back together, also just wandering if you though about a mic as sometimes when you put your camera down and you explain things its sometimes difficult to hear. Keep up the good work mate 🤙
Top job as always. I realise the camshafts are the last place to get oil hence the decision that if the cams are unmarked the engine is probably ok. Did you consider removing a big end to check bearing condition as they are the last place in the main bearing / big end line of oil flow? Clearly with the light going out so quickly all is well but interested in your perspective.
I was led to believe it had just happened with the light, so many things I could have pointed out in the video... If the crank had any signs of blue marking I would have pulled a cap off and looked the crank, and again with the cams, if any metal fillings were in the pick up I would have checked it more thoroughly.
Brilliant Baz shamefull waste of an engine at 62k if for the scrappie, commented on the ford focus wet belt change regarding my own experiences. Keep the vis comming!!!
I love these videos. Just bought one of these fiestas. Where are you located baz and how much would you charge for parts and labour to do the wetbelt? Thanks.
I don't know if its such a popular thing these days but you almost wonder if its been wound back at some point in its life before being sold and it has done more like 90K. That is bad. I've yet to work on one of these but might keep my eye for a "spares and repairs" that needs some work. I've seen that many of these done on YT by now.
Great description of what looks to be a difficult job. It looks like you go the extra mile in cleaning out all filters, advising the customer and replacing all parts whilst you’re in there. I wonder how many other garages would do that?
Good news for customers though, all those with vehicles under 10 years old, under 150k and have FSH from any independant garage get this done under goodwill from now on by ford
Not true, if engine goes bang, i have seen many forum posts of people that tried to claim the extended warranty. Ford required the print out of every service including all parts used, must be a ford filter and the requirement for the ford castrol magnetech oil This must be written on the print-out. A simple stamp in the service book isn't enough. A second owner would not have this info and if it had been serviced at an independent they may not have recorded or used the correct oil brand.
And I was told by 3 different ford dealers won't repair until the engine light comes on fullservice history, ticking time bomb,said it only happens on focus iv a ecosport same engine. Part exed it 43000,not waiting for the big bang! Never a ford again.
@@bazmeredith we bought a vauxhall 1.2 wet belt brand new and serviced it every year only doing 5000 miles and it still blocked the strainer wrong oil by the manufacturers unless you know of the issue and then service it every 5000 miles you have no chance for a joe bloggs until it happens now I service every 5000 miles at a huge cost all because the manufactures know of the issue why are all the trade bodies notdealing with this
I also cannot stand the heat, which is why my 2006 Audi has had a new AC compressor and condenser. I love the cold! Like you say, you can put a coat on. When its hot, I have to wear wet T-shits or im on the verge of passing out.
Know you know Baz, and we all do it, but for those watching, consider some specs when drilling above head height, a trip to A&E to get swarf out your eye is even less fun than for stitches, ask me how I know 😂
And if you ever need an MRI scan get an X-ray first. Swarf will rip your eyes apart in an MRI.
He's usually got his glasses on!
safety glasses ? a poor example, but, excellent work overall.
Your garage should sub contract from the local Ford Main Dealers jobs like this.
As you do them on a regular basis you are becoming an expert on them.
Had a bimmer in today for work - I've serviced a lot of cars, never seen an oil filter coated with a solid, toffee consistency layer of hardened oil, 5mm thick, all over the filter. Took a screwdriver to dig down into it to get to even see the filter paper. Zero oil was passing through that filter. Nada. Dropped the "oil" & it was the consistency of tapioca. All 3 liters of it.
Going by the drain plug, the filter housing & just general nouse, I reckon that this car had never had an oil change since new. 140k km on the clock. Service book all stamped up to date nice & purty... Brakes were in no better state.
A lot of garages out there pulling peoples plums IMO, Baz - they get the bills, but not the work done. You will know this yourself.
its funny,all the times ive worked on my vehicles ive removed the negative cable from the battery,i never thought of just taking off the earth cable off the firewall..much easier to do,thanks,learn something new every day..
Baz great video and presentation, you’ve blown us all away with your quality services, just wish people do proper maintenance on their eco boost engines ,💪❤️
Great job Baz, about time we saw one that needed doing😁. Camshafts and lifters all good confirmed by the Singer Standard Aural Test, sometimes we use a mouse's heartbeat as a reference when the sewing machine is out for calibration😆😆. And the oil pressure light went out instantly, good call on the new pump. Your customer just got away with that!
Well saved Baz.Awesome job as usual.That,ll be the last bit of love that car will get.
Excellent job, Baz. That must have taken you most of the day? Thanks for sharing.
Full day buddy
👋
Saved another one. Baz, in a situation like this will you be having a friendly word with the owner about maybe changing the oil a little more frequently or do you not bother?
Worse one I done was 95k blocked up strainer and 5 teeth missing from cambelt
Did the £Bill write off the car's value?
I will NEVER buy a wet belt FORD ...
Very impressive Baz superb job, purrs like a kitten 🐈⬛ kind regards and take care ol chap 👍
CRACKING JOB THERE BAZ YOU LOOK BETTER WITH YOUR GLASSES ON I HEARD WET BELTS ON FORD ARE A NIGHT MARE MATE HOPE YOU HAD A GOOD WEEKEND ON YOUR BIKE 🏍 😀
I think the extended service intervals of 18000 miles between oil changes does not help with the wet belts. I use the Ford labelled Castrol 5w20 every 12 months and I am only doing between 4000 - 5000 miles a year but mainly short journeys. Hopefully this will delay the inevitable failure as long as possible.
Think ford changed that now because my fiesta (2016) now states 1yr or 12k
Great save Baz, loving the time lapse, just wondering if you've thought about a mic, as sometimes when you put the camera down and explain things its difficult to hear you. Keep up the good work mate🤙
Great job as always. How much of that sludge and old belt is still in the oil gallery though🤔
Wet belt is the worst design. Ford dropped a clanger there.
Great job saving another economy boost.
I have a 2013 Fiesta Econetic, is there anyway to checking if the wetbelt has been changed, bought at 95k. It's now on 120k.
It's had services every 10-12k miles, so I'm hoping it can make 150k miles.
Is 150k possible on the original wetbelt
No way to check buddy unless there's proof of it being done, and I wouldn't like to push it to it's interval
Hi Baz, great program & informative but lacking in health & safety, plus for "me" far to many roonies, its so repetitive & annoying. sorry.
There's a reason for them being repetitive... And the roonies make it different
Just found you channel and i feel like I'm already a wet belt expert 😂 one question what's up with the accent and the the steering wheel on the wrong side though 🤔🤔🤣🤣 on a serious note why would you get rid of a dry timing belt??? Ford WTH falling apart at 60k
Baz weren't you tempted to remove a mains or big end cap to inspect the shell bearing's. I would of thought by doing this you would know if it was worth proceeding with the job.
Baz.. Would it be possible to use the endoscope to look at the oil pickup mesh through the sump drain?
No buddy it wouldn't saying that I've not tried, you know what I'll give it a go
So much work if they used the same Cover as the Eco blue it would be simple And machined in a Keyway in the crankshaft using half the Torque needed on that bolt holding the pulley, And must have known about the fibres in the sump strainer ,That sump should only be a max 1.5 hrs work and half a Day ,Such bad Design 2 extra oilseals and the Belt could have been Dry and moving the oil pump on the front of the crankshaft same as the Zetec Cvh Which should have a Keyway fitted 3 pins locking the timing job done, No wonder I Now Drive A Hgv 😂
Smashed it Baz well saved keep it up lad enjoy watching ur content 👌🏻🔥😎🤝
26c in that garage according to the readout on the speedo, nice cold beer to add to your checklist when you're done!
It was a warm one yesterday, but what's out of sight is a portable AC machine keeping me cool ISH
Ive been watching all of your ecoboost timing belt videos. Great job mate, thanks a lot.
Im considering doing the job myself to be honest, feeling quiet confident after watching the videos.
Keep up the great work.
Just wanted to ask, where i could get the repair manual from for me to have the step by step guide and torque values etc.
And what part number does the torque converter have you use on the crank pulley?
Is it advisable to change the oil and water pump while already there? My car has about 150k KM on it. Or any other parts while already getting everything off?
definitely never been serviced you would not get all that filth if it had ,thanks for the video.
You work on these engines a lot can you tell me if it’s normal on a cold start (1st start of day being sat overnight) for the engine oil light to stay on for 1-2 seconds after starting, all other starts during the day it goes out instantly
Just subbing to the channel looks interesting , I don't want to tell you how to suck eggs but please wear. Eye defenders when drilling , could save you a very painful eye injury , I've been there 👍🧑🔧
What is the miles of that car? I don't see many 1.0 eco boosts in the UK. Ford engine goes badly later than 2012 models. Who the heck designed a rubber belt soaked in oil?
Baz, in your last wet belt video and this one too, you took off the vacuum pump to clean out the filter which was also full of belt material. Assuming removing that is a much easier job than dropping the oil pan, is the vacuum pump filter state a reliable indicator of belt health?
I take the sump off regardless of anything else, it may have been removed previously to me working on it and not had the belts done
Give me a mark one fiesta or two or three or four not this engine what a nightmare I’m glad I’m old engines were simple to work on poxy wet belt lol
Old cvh anyday
@@bazmeredith had a mk3 escort cvh went like the clappers
Where’s your workplace baz ? Wales ? If I need any work doing that’s why I’m asking your great at what you do 👌
@@AnthonyToth-t5v I'm near Wrexham buddy
Hi baz y do you put oil over the cams before you put the cover back on i was always told this wen i was a lad i am a old x mechanic now well done mate 😂😂
I have a fiesta 1.0L ecoboost. It is about 10 years old and has done just over 73k miles. It has never had a wet belt replacement but it has also been properly looked after. All services done on time, only ever taken directly to Ford for servicing. Only ever had the officially recommended oil used on it. Even for small things such as new heat shields, the work has been done only at Ford garages.
What are the chances my belt is bad? I could not afford to get a replacement but that also means I couldn't afford to repair if it is bad enough to go 'boom'...
I wouldn't like to say sorry if I said it was good and it failed I'd have given you wrong advice and made me look bad, but any doubt by yourself please get it changed
Boss, where r u located and how much you charge to do timing belt on these 1.0 ecoboost engine???
First 😮
My 1.0 ecosport is vibrating a lot on idle what could be the reason
Baz, there's also a mesh strainer in the "Oil Pressure Control Solenoid" that can block with wet belt debris. This solenoid is on the rear of the engine block, beside the plug where the crank timing pin screws in. There's a Dayco instruction video on TH-cam "Garage Wire" Channel showing this solenoid being removed to check and clean the mesh strainer.
Do you know if the 1.6 ti-vct (sigma) has a filter in the block for the variable valve solenoids ? Or just screens on the solenoids themselves?
@@offbeatwarble I only know about the mesh strainer on the Oil Pressure Control Solenoid of the Ford 1.0 litre Ecoboost engine. I don't know anything about the 1.6 ti-vct Sigma engine, if it has similar filters or where they might be located.
Everything about this engine design is ridiculous.
Great engines when looked after
Excellent work on that ecoboost. The quality of your work is epic .Highest standards possible. Love your vlogs .Keep them coming
Cheers buddy 🤙
Nem kell megvárni míg kigyullad a lámpa, endoskop kamerával a kieresztőlyukon keresztül meg lehet az olaj csere alkalmával nézni a szűrőt és ha fel vette a koszt, akkor szíjat kell cserélni
Those engines sound terrible
If it has a FSH Ford are now covering all costs regarding wet belt issues
No way this has FSH!
They are covered up to 10 years 100k for wet belt failure. Car needs full service history dosnt need to be ford dealer service history, year 2020 is allowed to be missing due to covid, and you get 3 months leeway either side of the service due dates to be covered. Obviously we don't know the service history on this car to determine that.
@@azerotha4531 I thought it was 150k ?
@derekfleming3095 my mistake lol you are correct 150k up to 10 years on the same action notice, Ford mentioned a reduction on change interval for the transit wet belt going from 150k to 100k. I knew there was 100k in there somewhere lol
1L ecoboost engine most of the time that engine have problem oil pump
that oil pick up wos bad the worst iv seen
He’s never changed the oil for sure
What is wrong with a chain. Rubber belts suck.
Super knowledge you have on these engines.
I am at the moment stripping one down due to the piston skirt snapping off of the bottom of piston 1, and hopefully changing the belts on a 14 plate. Has full service history and other than the skirt problem it is clean as a whistle with no belt debris to be seen. Anyone had the same problems with a skirt snapping?
I've not had any problems other than belt issues, and I've seen them with all sorts of different millages from 30k straight up to 130k if not more
Good save Baz, that was proper blocked, loving the time lapse, we get to see you taking things off, although we do like a little bit of magic when it puts itself back together, also just wandering if you though about a mic as sometimes when you put your camera down and you explain things its sometimes difficult to hear. Keep up the good work mate 🤙
Ye it's in the basket buddy
@bazmeredith sorry mate, when I looked my original comment didn't show up so I sent another 🤙
Hate the heat
Great video as usual, what make of torque multiplier do you use, regards Andy
Go in my bio to my linktree and it's all in there
@@bazmeredith Great.... Got it thank you
Top job as always. I realise the camshafts are the last place to get oil hence the decision that if the cams are unmarked the engine is probably ok. Did you consider removing a big end to check bearing condition as they are the last place in the main bearing / big end line of oil flow? Clearly with the light going out so quickly all is well but interested in your perspective.
I was led to believe it had just happened with the light, so many things I could have pointed out in the video... If the crank had any signs of blue marking I would have pulled a cap off and looked the crank, and again with the cams, if any metal fillings were in the pick up I would have checked it more thoroughly.
@@bazmeredith excellent logic
Safety squint in use when drilling that stud I see 😂
Another great video....how do those filters come out of the oil pump for cleaning?
Prybar and they just pop straight out
Wet belt king again. 😂
How do I contact your garage by phone ??
Brilliant Baz shamefull waste of an engine at 62k if for the scrappie, commented on the ford focus wet belt change regarding my own experiences. Keep the vis comming!!!
Executive video Top man ❤👍
I love these videos. Just bought one of these fiestas. Where are you located baz and how much would you charge for parts and labour to do the wetbelt? Thanks.
Nice job!!!! How much does it cost???
I don't know if its such a popular thing these days but you almost wonder if its been wound back at some point in its life before being sold and it has done more like 90K. That is bad. I've yet to work on one of these but might keep my eye for a "spares and repairs" that needs some work. I've seen that many of these done on YT by now.
OH&S thrown out the garage door?, no eye protection when drilling, looking up. Wait till you get corneal abrasion and a rust ring.
Great description of what looks to be a difficult job. It looks like you go the extra mile in cleaning out all filters, advising the customer and replacing all parts whilst you’re in there. I wonder how many other garages would do that?
Well done mate 👏 saved it 👌
Great job mate 👍🏻
Looks like you could do these eco booms in your sleep.
Not far off 😂
Very good video.
Have ford not now given an extra warranty on these engines because it definitely the way to lose customers if they don't do
saved!
Great job 👍
👍
It would be interesting to see the service history on this vehicle.
Call me thick but why is there not a chain instead of a rubber belt? Shocking that ford have left the customers out in the cold
Cheaper ???
Another owner who didnt know how to look after their car.
Where in Wales's are you baz great video
Absolutely love this channel mate 👍
Good news for customers though, all those with vehicles under 10 years old, under 150k and have FSH from any independant garage get this done under goodwill from now on by ford
Not true, if engine goes bang, i have seen many forum posts of people that tried to claim the extended warranty. Ford required the print out of every service including all parts used, must be a ford filter and the requirement for the ford castrol magnetech oil This must be written on the print-out. A simple stamp in the service book isn't enough. A second owner would not have this info and if it had been serviced at an independent they may not have recorded or used the correct oil brand.
And I was told by 3 different ford dealers won't repair until the engine light comes on fullservice history, ticking time bomb,said it only happens on focus iv a ecosport same engine. Part exed it 43000,not waiting for the big bang! Never a ford again.
baz these wet belts are terrible and why is the motor trade doing nothing about them
They are, it's all down to servicing them, I've done many now with 90k on and the strainer has been spotless
@@bazmeredith we bought a vauxhall 1.2 wet belt brand new and serviced it every year only doing 5000 miles and it still blocked the strainer wrong oil by the manufacturers unless you know of the issue and then service it every 5000 miles you have no chance for a joe bloggs until it happens now I service every 5000 miles at a huge cost all because the manufactures know of the issue why are all the trade bodies notdealing with this
I also cannot stand the heat, which is why my 2006 Audi has had a new AC compressor and condenser. I love the cold! Like you say, you can put a coat on. When its hot, I have to wear wet T-shits or im on the verge of passing out.