I had a C in my 93 Volvo and it was a gutless disappointment for several years. The ECM shorted out around 400,000 miles, and instead of replacing it , Terry at Pantropic Cat in Fort Meyers turned it back to a mechanical B with some pump and timing fabrication. Plus a fuel pedal. What an absolute monster. He set it at 2150 rpm's saying i didnt need it any faster. With 24.5 rubber and 373 rears 105 mph was no sweat. The beast accelerated up Mt Eagle with about 20,000 lbs in my Atlas Van line wagon rolling coal like a Fletcher Class destroyer laying smoke. 4 mpg being foolish, almost seven when being frugal. Dropped a valve at about 1.3 million miles and had the big Cat dealer in Winchester VA on I-81 overhaul it and put another ten years on it including heavy hauling prefab concrete panels up to 125,000 lbs a whack. Broke my heart when i sold it. My two 350 cummins were as bullet proof and economical as anything going but for sheer power and reliability and longevity nothing could touch that Cat. Fuck carb,epa,def,scr,dpf and every other alphabet soup sob that doesnt understand what it takes to move freight and run a business.
It's hard to believe you can't find someone interested in learning mechanics. I spent my life working various construction trades, mostly electrical, but vehicle repair was my favorite past time. Did a head gasket replacement, water pump replacement,and dozens of other repairs and all my own maintenance on my lly. In fact my truck hasn't been to a mechanic in 17 years. Hope you can find someone to help take some stress and workload off of you. Even though I'm retired if I lived close to your shop I would enjoy helping out. Keep up the good work. You're the hardest working and most knowkedable mechanic I've ever seen!!
When I went to trade school for diesel mechanic, back when mechanic's were called mechanics. My engine I worked on was a Cat 3406B. Really nothing to them, solid engine and when she fired, was so sweet and satisfying. If I remember correctly, my old instructor called the 3408's throw away blocks. My opinion, this old 3406B is still worth fixing. Great video as always
Thank you warren, i really like your video's, especially when you tell stories, you do it so well. I appreciate the time it takes to make these video's after working a very full late day, and then getting the tube cheating you. You do so many different kinds of job's, and it's always interesting to see what comes in next. G-d bless you, the family, and the furry critters.
I am an old fart now, but also way back when I was doing my training I worked with one of the old school guys. Back then, the mechanic training you was either Sir or Mr. If you fooled around (and we did, because that's what young guys do), the mechanic would warm your ear for you ! Those old 3406 motors were fantastic, took a real beating, fairly simple to repair and gave good service.
I like you warren, honesty and skill makes you a valuable person. I hope you get paid enough to make it worth it. For one person to do as much as you do is unbelievable
I’ve said it more than a few times over the years about you but it’s always true: you work hard, you work smart, you lead your chosen field by example. Thanks Warren.
Love that engine. I in framed 2 of them from the same farmer. Had 2 kenworths that were twins. Had a blown head gasket and they let it sit for a year. Top end was rusted so had to replace everything. Great running engines for sure. Love the sound too
Great video Warren. As always, very informative and your stories are the icing on the cake (or do you guys say frosting). Regardless, I always look forward to your new video. Thanks for sharing.
Thanks for the video Warren. So pleased to have you back fixing stuff. TH-cam is not the same without you sir. I'm waiting for the day that train breaks down and they call on you to do the locomotive engine. Did I see that the new Cat truck engine looks like it's PACCAR MX. You'll be delighted as a PACCAR lover.
Thanks for the video man always enjoy seeing people keeping the old engines running. I really like the old b model cats and big cam Cummins . I did a inframe on a b model cat in a frieghtliner cab over couple years ago and those sure are some really good engines. Keep up the good work man Thanks again God bless
Great video Warren ,it's always so interesting watching and listening to you while your tearing down an engine . Enjoy the stories,and rants Thanks for sharing Safe travels
Thank you Warren very much for all your videos. They have been a life saver for my husband as he has been under the weather lately and watching your videos has been really good for him. He loves every one of them and I usually get a blow by blow explanation as to what you are doing, why and a “that’s how I’ve done it too” comment. Keep the videos coming. He loves every one of them.
Didn't do all that work to find out it spun a bearing!! You were told it hydrolocked and you removed the head and verified the original complaint. Further investigation, after finding that with the head removed it was hard to turn, found the spun bearing!!! Great diagnostic teardown!!
hey warren , want to thank you for all the videos during the years , you have learnt me alot , even push me to try out heavy mech since its seems good fun , sadly i workt at that shop for 2 months with no pay , leasson that too , greatings from sweden
Great video Warren as always you take the time to bring us these videos and like you said you already work from sun up to sun down to make a living. Appreciate everything you do to bring us these videos. God bless Warren to you and your family stay safe.
Looks like you have a 7FB, JWAC, with a Brakesaver. 3406 (now called A model) was a PCT, PCTA, DIT, DITA. (1973-1984) 92U prefix. 3406B at first was a 7FB, JWAC DITA, later ATAAC was added. As they ran out of serial numbers, the first 4MG's 1-03599 was still basically the same and still could be a JWAC. Starting at 4MG03600 the VTU was the major change. And they went into the 90,000 serial numbers. Then they came out with a 5KJ and it was a 3406B, 1-07799. Most people get this serial number mixed up is the 3406 B 3ZJ, serial numbers 1-16181 is a 3406B. During the late 80's the dreaded PEEC was released. Electronic governor and VTU. You had PEEC II, PEEC II.V They started out as a 3406B 8TC. released next of the PEEC was a 2EK, still a 3406B. Last PEEC was the 4CK and it was a 3406B 1-0845. Another 3406B PEEC was a 5YG strictly a 460 HP @1900 RPM'S. After the 3406B ended the 3406C was released. Mechanical was 5KJ07800 and up, I have never seen one of these. 3JZ16182 and up. The last fully mechanical 3406C was the 8PN. It is a totally different engine and parts do NOT inner change well with the older engine. Finally you had the last PEEC, 4CK0846 and up. It was a PEEC III and had a lot of VTU problems. Just ran across some 5KJ's 3406C's that was JWAC and high HP. Looking into these.
It kinda sounds like you might have spent a little time in a cat shop... guy like you are getting few and far between. It's getting harder and harder to call anyone that knows anything about the older engines. Most of my old buddies that know stuff like you obviously do are gone.
@@danielelliott3659 In my 43rd year, been around the block with Cat engines. Worked on everything but a 1670, 1676, 3306/3406, Gas truck engine and a 1693 with a forged body fuel system. I have never seen these in a truck only pictures. When I hired in 3406 92U's was current production.
I am not a fan of cabovers because I drove cabover Freightliners for years. If that was my truck I would find a used engine or a used crankshaft and get it running again. The older trucks are way better than the new ones. But I am a fanatic about 3406`s as I am one of the few that ever ran a D7 with a 3406. It was the fastest Cat steel tracked crawler every made. It is the only D7e ever converted that I know of the other D7`s were D7f`s. We pulled out a 180 hp 4 cylinder engine that ran 1330 rpm`s wot. And we installed the 3406 that would run 2100 rpm`s wot. But we did change the ring a pinion gears on the cross shaft. The tractor would go 8 mph in 5th gear so we never used 5th. But I know how much torque a 3406 has back in the 80`s I was driving a 1979 International 4300 with a KTA Cummins set at 525 hp. Some viewers may know a KTA Cummins is 1150 cubic inches. When pulling Cabbage Hill east of Pendleton guys with 3406`s would out pull me going up the hill. But I would always pass them when it started to level off as the acceleration of KTA would let me upshift. And they could not upshift until it leveled out. But the drivers we have now have no clue what real truck driving is like. I learned in a Kenworth a 318 Detroit then I was driving a Freightliner with a 220 Cummins. This a truck that took me an hour to drive 13 miles. This is also a truck that I hand to downshift going down hill because of the headwind. Thank you for another nice video.
I have a 3406C and this video was of the most interesting to me. The engine in my Kenworth has over 40,000 hours on it and still running. Really felt for you when you were getting the oil pan out. I seriously doubt the owner will rebuild this engine due to cost and time down. Way cheaper in $$ and time just to replace.
Hey Warren, thanks for the video. I enjoy all of your hard work on these videos you put out and wish that I was able to support your channel other then just watching them. You sir deserve it more than anyone that I know of on TH-cam and I really appreciate it. So once again thank you.
Thank you Warren, did I see the hay loader still in the shop? You were doing a engine conversation on it, How is that coming, You are a master at figuring this stuff out, what a joy to watch and learn.
Great job Warren, I've got a 4MG and a 3ZJ mechanical 3406 and haven't seen a more informational teardown. Both mine have under 400K and only get driven at harvest but the age of them makes me wonder when a liner O ring or head gasket might go bad. I really liked the diagnostics of the 8R 3 point hitch although I hate seeing such nice equipment completely abused like that.
I liked your comment on the turn in the fuel screw. We farm and pretty much all of our tractors have been turned up I don’t have anything stock. Years ago I used to tractor pull with an 86 series international Harvester those American Bosch 100 pumps had a fuel screw also to turn the fuel up we would turn them up to go tractor pulling and turn them back down to go back in the field at what we normally ran them at there was an old mechanic years ago that was a pump master I’m getting horsepower out of them. His best line used to be I can make it run I won’t guarantee how long lol
Thanks for another video I always enjoy them and always watching for them as I get no notifications from TH-cam even tho I am a subscriber. Keep up the good work.
Yeah when i was in Diesel school in 1987 , the school wouldn't let us rebuild the cat engines , too expensive , so we were stuck on the DDA's , i remember seeing the first prototype Cummins diesel in a pick up truck , after that diesels became a big thing in Pick up trucks. No more racks for fuel delivery , everything was switching over to Electronic. Worked for Cullen , they had the lightest truck engine on the market but the heads would crack , ended up in the shipyards and worked as an engine fitter. Lots of memories , my uncle and grandfather were diesel mechanics.
There I was, scratching my ass, throwing stupid toys at the cat and I thought....Warren! Lo and behold. Joy, another Warren video. So, large coffee, a couple of biscuits, feet up, cat punted out the window. Settled down to watch the master at work.
When the 3406b was introduced into trucks in the UK in the 80's we found that they had a lot of problems with the intermediate head gaskets, also the engine stop solenoid on the fuel pump was very unreliable,forever being called out to the roadside
It is sad to see good equipment being broken just because you just don't want to deal with fixing it. I always wondered why people ignore issues, but it is the mentality you are being taught trough your environment. My father is also the type of guy that doesn't care anything about preventive maintenance at all. If something leaks oil then just keep filling it up, till you forget it once and now you have to deal with broken gears and bearings just because you didn't care it would be an issue. Water in engine oil is just one of those things that I never understand that it will cause a catastrophic failure eventually. Maybe the whole issue is that people think that you are just trying to sell them unnecessary stuff. And I get to a point, but eventually everyone will learn :D
👍👍have got a B model outback in a retired freightshaker...hasn't ran in probably 10 years.. should do something with that engine some day....have also go an E model, that I quite like.... like most folks ..as well as it's successors ...just got done out of Framing the fuckin thing... hopefully it runs a long time again...knock on wood...but anyway,thanks for all u do..as always 👊
A series or mk1 or 1st gen is often applied retrospectively, manufacturers wouldn’t use it on new engines or vehicles to avoid the suggestion that an improved model would be coming later
Farmers are a tight ass bunch no doubt. In my state you have to use" on road" green fuel in licensed farm trucks. The fuel on top of number three piston looked ruby red!! Maybe your state is different.
great vib Warren, lve just stripped a 4 cylinde dura torque engine down with a rob knock only to find all the top bearings on the rods where worn badly and this was on a reman engine to that had only done only 10,000 miles.
Unbelievable amount of work for a diagnosis. Your brain and know how is a vast amount of knowledge that could hardly be learned from a manual. If you get tired of doing it yourself, you should teach, like the fellow you mentioned that made an impression on you, since you would have so much to offer. Kind of like the last few in a tribe of Indians passing on a skill before they croak and it's lost.
Thanks for the share Warren. I enjoy your videos. you said about turning the injector screw in and increase the rack... back when i worked for Genesee Ford Truck and they had the IH engines in em.... i called em a corn binder engine ... lol.... we'd loosen the injector pump and rack that as far to the left as the lines would allow..... that would wake'er up a lil bit. some of the horse play that would go on in that shop.... lol
What I did on a Leyland engine , head removed, sump removed, filled the block with neat anti freeze. left it for an hour, then blue drips of anti freeze came past the liner seals on two defective liners
Let's not forget those pesky adapters that bridge the injection lines to the nozzle, that can cause a miss. Learned that the hard way once upon a time.
My first Pete, 1982 had a A model motor,it was great on fuel,the bad part was Peterbilts then had metal roofs,that was the not so good part of that trk,Peterbilts after that one was all glass roofs, that solved my problem.
I had a C in my 93 Volvo and it was a gutless disappointment for several years. The ECM shorted out around 400,000 miles, and instead of replacing it , Terry at Pantropic Cat in Fort Meyers turned it back to a mechanical B with some pump and timing fabrication. Plus a fuel pedal. What an absolute monster. He set it at 2150 rpm's saying i didnt need it any faster. With 24.5 rubber and 373 rears 105 mph was no sweat. The beast accelerated up Mt Eagle with about 20,000 lbs in my Atlas Van line wagon rolling coal like a Fletcher Class destroyer laying smoke. 4 mpg being foolish, almost seven when being frugal. Dropped a valve at about 1.3 million miles and had the big Cat dealer in Winchester VA on I-81 overhaul it and put another ten years on it including heavy hauling prefab concrete panels up to 125,000 lbs a whack. Broke my heart when i sold it. My two 350 cummins were as bullet proof and economical as anything going but for sheer power and reliability and longevity nothing could touch that Cat. Fuck carb,epa,def,scr,dpf and every other alphabet soup sob that doesnt understand what it takes to move freight and run a business.
It's hard to believe you can't find someone interested in learning mechanics. I spent my life working various construction trades, mostly electrical, but vehicle repair was my favorite past time. Did a head gasket replacement, water pump replacement,and dozens of other repairs and all my own maintenance on my lly. In fact my truck hasn't been to a mechanic in 17 years. Hope you can find someone to help take some stress and workload off of you. Even though I'm retired if I lived close to your shop I would enjoy helping out. Keep up the good work. You're the hardest working and most knowkedable mechanic I've ever seen!!
When I went to trade school for diesel mechanic, back when mechanic's were called mechanics. My engine I worked on was a Cat 3406B. Really nothing to them, solid engine and when she fired, was so sweet and satisfying. If I remember correctly, my old instructor called the 3408's throw away blocks. My opinion, this old 3406B is still worth fixing. Great video as always
3208 throwaway. 3408 Powerhouse V8.
Glad to see your posting Warren . I’ve always been amazed by your many talents 👍👍
Thank you warren, i really like your video's, especially when you tell stories, you do it so well. I appreciate the time it takes to make these video's after working a very full late day, and then getting the tube cheating you. You do so many different kinds of job's, and it's always interesting to see what comes in next. G-d bless you, the family, and the furry critters.
Haha! Can’t you see warren teaching a classroom full of booger picking gen z’ers? 😂
N😊
Joesie get over here , darned dog . Sometimes I need to leave un home. We live for you and the dogs champ
Warren, I love your detailed explanation and diagnosis of the 3406 issues! Most mechanics don't have your knowledge!
Thanks for coming back always enjoy your stories and knowledge over so much machinery and how nothing stops you in sometimes trying conditions thanks
I am an old fart now, but also way back when I was doing my training I worked with one of the old school guys. Back then, the mechanic training you was either Sir or Mr. If you fooled around (and we did, because that's what young guys do), the mechanic would warm your ear for you ! Those old 3406 motors were fantastic, took a real beating, fairly simple to repair and gave good service.
I like you warren, honesty and skill makes you a valuable person. I hope you get paid enough to make it worth it. For one person to do as much as you do is unbelievable
Thanks for the lesson about the difference between a nozzle and an injector. Every time I watch one of your videos I learn something new.
Its good to see you back on form with these extremely interesting videos.
Thank you Warren for the video. I enjoy hearing your stories of back in the day and all the knowledge of engines. Keep up the good work!
Thank you for the great instructions while taking the Cat engine apart.
I love the videos warren !
Thank you for taking time to record and edit. I really appreciate it 👍👍👍🇺🇸🇺🇸
Excellent video, as usual. Very glad you are back on stream.
I’ve said it more than a few times over the years about you but it’s always true: you work hard, you work smart, you lead your chosen field by example. Thanks Warren.
Always learn something watching you wrench, great videos!
Thanks for taking us along on this engine repair
Do not stop making vids. Such a great content every time.
Love that engine. I in framed 2 of them from the same farmer. Had 2 kenworths that were twins. Had a blown head gasket and they let it sit for a year. Top end was rusted so had to replace everything. Great running engines for sure. Love the sound too
Great video Warren. As always, very informative and your stories are the icing on the cake (or do you guys say frosting). Regardless, I always look forward to your new video. Thanks for sharing.
Thanks for the video Warren great job as always you are amazing mechanic. Take care of yourself and family and be Blessed and your dogs.
Thank you warren!!
Thanks for the video Warren. So pleased to have you back fixing stuff. TH-cam is not the same without you sir. I'm waiting for the day that train breaks down and they call on you to do the locomotive engine.
Did I see that the new Cat truck engine looks like it's PACCAR MX. You'll be delighted as a PACCAR lover.
Thanks for the video man always enjoy seeing people keeping the old engines running. I really like the old b model cats and big cam Cummins . I did a inframe on a b model cat in a frieghtliner cab over couple years ago and those sure are some really good engines. Keep up the good work man Thanks again God bless
Thanks for the video Warren
Now, this was a great video. Informative, educational, and a great use of my time!
Great to see you back, I smile when I see a new video has been posted.
Enjoyed your video. I like it when you reminisce about the old days and your explanation of the fuel system.
Great video Warren to bad it spun a bearing. Thanks for sharing really enjoy your commentary on this video stay safe Warren.
Great show and tell video. Please keep posting as these are very informative. Thx
Great video Warren ,it's always so interesting watching and listening to you while your tearing down an engine .
Enjoy the stories,and rants
Thanks for sharing
Safe travels
Thanks for the entertainment Warren. Always interesting to watch you fix stuff.
Thanks Warren, you obviously love your work and desire to excel.
Thank you Warren very much for all your videos. They have been a life saver for my husband as he has been under the weather lately and watching your videos has been really good for him. He loves every one of them and I usually get a blow by blow explanation as to what you are doing, why and a “that’s how I’ve done it too” comment. Keep the videos coming. He loves every one of them.
Thank you
Didn't do all that work to find out it spun a bearing!! You were told it hydrolocked and you removed the head and verified the original complaint. Further investigation, after finding that with the head removed it was hard to turn, found the spun bearing!!! Great diagnostic teardown!!
hey warren , want to thank you for all the videos during the years , you have learnt me alot , even push me to try out heavy mech since its seems good fun , sadly i workt at that shop for 2 months with no pay , leasson that too , greatings from sweden
Watched you pull a cat down but came here for the great stories you tell.
Thanks for your time and consideration Warren very informative 🚜🚜🚜
Great video Warren as always you take the time to bring us these videos and like you said you already work from sun up to sun down to make a living. Appreciate everything you do to bring us these videos. God bless Warren to you and your family stay safe.
Haha Bill was right 👍. Cat did that on their backhoes also, remember the 416 was their first model. Then the next gen was the 416b, 416c, etc.
Looks like you have a 7FB, JWAC, with a Brakesaver.
3406 (now called A model) was a PCT, PCTA, DIT, DITA. (1973-1984) 92U prefix.
3406B at first was a 7FB, JWAC DITA, later ATAAC was added. As they ran out of serial numbers, the first 4MG's 1-03599 was still basically the same and still could be a JWAC.
Starting at 4MG03600 the VTU was the major change. And they went into the 90,000 serial numbers. Then they came out with a 5KJ and it was a 3406B, 1-07799. Most people get this serial number mixed up is the 3406 B 3ZJ, serial numbers 1-16181 is a 3406B. During the late 80's the dreaded PEEC was released. Electronic governor and VTU. You had PEEC II, PEEC II.V They started out as a 3406B 8TC. released next of the PEEC was a 2EK, still a 3406B. Last PEEC was the 4CK and it was a 3406B 1-0845. Another 3406B PEEC was a 5YG strictly a 460 HP @1900 RPM'S.
After the 3406B ended the 3406C was released. Mechanical was 5KJ07800 and up, I have never seen one of these.
3JZ16182 and up. The last fully mechanical 3406C was the 8PN. It is a totally different engine and parts do NOT inner change well with the older engine. Finally you had the last PEEC, 4CK0846 and up. It was a PEEC III and had a lot of VTU problems.
Just ran across some 5KJ's 3406C's that was JWAC and high HP. Looking into these.
It kinda sounds like you might have spent a little time in a cat shop... guy like you are getting few and far between. It's getting harder and harder to call anyone that knows anything about the older engines. Most of my old buddies that know stuff like you obviously do are gone.
@@danielelliott3659 In my 43rd year, been around the block with Cat engines. Worked on everything but a 1670, 1676, 3306/3406, Gas truck engine and a 1693 with a forged body fuel system. I have never seen these in a truck only pictures. When I hired in 3406 92U's was current production.
Thanks for the video Warren. I'm not a mechanic but I learned a lot from the video. Thanks again.
It’s crazy how many engines you do every year? Keep up the good work Warren we enjoy the videos
Thank you for posting videos again sir! I will contribute to you
I am not a fan of cabovers because I drove cabover Freightliners for years. If that was my truck I would find a used engine or a used crankshaft and get it running again. The older trucks are way better than the new ones. But I am a fanatic about 3406`s as I am one of the few that ever ran a D7 with a 3406. It was the fastest Cat steel tracked crawler every made. It is the only D7e ever converted that I know of the other D7`s were D7f`s. We pulled out a 180 hp 4 cylinder engine that ran 1330 rpm`s wot. And we installed the 3406 that would run 2100 rpm`s wot. But we did change the ring a pinion gears on the cross shaft. The tractor would go 8 mph in 5th gear so we never used 5th. But I know how much torque a 3406 has back in the 80`s I was driving a 1979 International 4300 with a KTA Cummins set at 525 hp. Some viewers may know a KTA Cummins is 1150 cubic inches. When pulling Cabbage Hill east of Pendleton guys with 3406`s would out pull me going up the hill. But I would always pass them when it started to level off as the acceleration of KTA would let me upshift. And they could not upshift until it leveled out. But the drivers we have now have no clue what real truck driving is like. I learned in a Kenworth a 318 Detroit then I was driving a Freightliner with a 220 Cummins. This a truck that took me an hour to drive 13 miles. This is also a truck that I hand to downshift going down hill because of the headwind. Thank you for another nice video.
Amazing video. Without you a lot of these tasks would never be documented or shown .
I have a 3406C and this video was of the most interesting to me. The engine in my Kenworth has over 40,000 hours on it and still running. Really felt for you when you were getting the oil pan out. I seriously doubt the owner will rebuild this engine due to cost and time down. Way cheaper in $$ and time just to replace.
Hey Warren, thanks for the video. I enjoy all of your hard work on these videos you put out and wish that I was able to support your channel other then just watching them. You sir deserve it more than anyone that I know of on TH-cam and I really appreciate it. So once again thank you.
Thank you Warren, did I see the hay loader still in the shop? You were doing a engine conversation on it, How is that coming, You are a master at figuring this stuff out, what a joy to watch and learn.
Thank you for the video Warren, 👍
Nice footage - Thank you Warren 👍🔥
The b's one of the best engines ever made simple and powerful
In a previous life, I had one of those. I could haul 110 bales of pressed cotton at 80 mph. I loved the sound. I could whistle while I worked.
I went to wyotech in 2010 and Bill Zweig was my instructor. He passed away in 2012. He was my favorite
Great job Warren, I've got a 4MG and a 3ZJ mechanical 3406 and haven't seen a more informational teardown. Both mine have under 400K and only get driven at harvest but the age of them makes me wonder when a liner O ring or head gasket might go bad. I really liked the diagnostics of the 8R 3 point hitch although I hate seeing such nice equipment completely abused like that.
Great to see another one!!! 👍👍😊
I liked your comment on the turn in the fuel screw. We farm and pretty much all of our tractors have been turned up I don’t have anything stock. Years ago I used to tractor pull with an 86 series international Harvester those American Bosch 100 pumps had a fuel screw also to turn the fuel up we would turn them up to go tractor pulling and turn them back down to go back in the field at what we normally ran them at there was an old mechanic years ago that was a pump master I’m getting horsepower out of them. His best line used to be I can make it run I won’t guarantee how long lol
Thanks for making and sharing this Warren. Much appreciated
Thanks for another video I always enjoy them and always watching for them as I get no notifications from TH-cam even tho I am a subscriber. Keep up the good work.
Yeah when i was in Diesel school in 1987 , the school wouldn't let us rebuild the cat engines , too expensive , so we were stuck on the DDA's , i remember seeing the first prototype Cummins diesel in a pick up truck , after that diesels became a big thing in Pick up trucks. No more racks for fuel delivery , everything was switching over to Electronic. Worked for Cullen , they had the lightest truck engine on the market but the heads would crack , ended up in the shipyards and worked as an engine fitter. Lots of memories , my uncle and grandfather were diesel mechanics.
Thank you WARREN.
There I was, scratching my ass, throwing stupid toys at the cat and I thought....Warren!
Lo and behold. Joy, another Warren video.
So, large coffee, a couple of biscuits, feet up, cat punted out the window. Settled down to watch the master at work.
Great video Warren , thank you. 👍👍👍👍
When the 3406b was introduced into trucks in the UK in the 80's we found that they had a lot of problems with the intermediate head gaskets, also the engine stop solenoid on the fuel pump was very unreliable,forever being called out to the roadside
i just dont have the patience to work on that kind of crap, more power to you sir!
Thanks for another great video.
It is sad to see good equipment being broken just because you just don't want to deal with fixing it.
I always wondered why people ignore issues, but it is the mentality you are being taught trough your environment.
My father is also the type of guy that doesn't care anything about preventive maintenance at all. If something leaks oil then just keep filling it up, till you forget it once and now you have to deal with broken gears and bearings just because you didn't care it would be an issue.
Water in engine oil is just one of those things that I never understand that it will cause a catastrophic failure eventually.
Maybe the whole issue is that people think that you are just trying to sell them unnecessary stuff. And I get to a point, but eventually everyone will learn :D
Great video! Thank you 🇨🇦
THanks for letting us watch. Yer awesome
RIP Bill Zwieg, I have fond memories of that man myself.
Thank you for the video I am working on a b model now inframe
Picked up my b from cat yesterday. Bad block and 43 k later we are back to hauling
👍👍have got a B model outback in a retired freightshaker...hasn't ran in probably 10 years.. should do something with that engine some day....have also go an E model, that I quite like.... like most folks ..as well as it's successors ...just got done out of Framing the fuckin thing... hopefully it runs a long time again...knock on wood...but anyway,thanks for all u do..as always 👊
Always well explained - Keep em coming!
Great to se you are happy again love it
Good video 👍 see you on the next one
Take care 👍👍
A series or mk1 or 1st gen is often applied retrospectively, manufacturers wouldn’t use it on new engines or vehicles to avoid the suggestion that an improved model would be coming later
Farmers are a tight ass bunch no doubt. In my state you have to use" on road" green fuel in licensed farm trucks. The fuel on top of number three piston looked ruby red!! Maybe your state is different.
great vib Warren, lve just stripped a 4 cylinde dura torque engine down with a rob knock only to find all the top bearings on the rods where worn badly and this was on a reman engine to that had only done only 10,000 miles.
Weer een top video Warren ben blij je terug te horen en zien top kerel 💪💪🤘
Unbelievable amount of work for a diagnosis. Your brain and know how is a vast amount of knowledge that could hardly be learned from a manual. If you get tired of doing it yourself, you should teach, like the fellow you mentioned that made an impression on you, since you would have so much to offer. Kind of like the last few in a tribe of Indians passing on a skill before they croak and it's lost.
Great video Warren.
Thanks for the share Warren. I enjoy your videos. you said about turning the injector screw in and increase the rack... back when i worked for Genesee Ford Truck and they had the IH engines in em.... i called em a corn binder engine ... lol.... we'd loosen the injector pump and rack that as far to the left as the lines would allow..... that would wake'er up a lil bit. some of the horse play that would go on in that shop.... lol
good video ,always teaching us
Thanks for sharing the bad news Warren , great video though , engine swap video , maybe , have a good one .
the 3406 A is DITA 380 HP the thru head adapters are loose in their mounting adapters
Warren you have a great channel keep up the great work would hate to loose you buddy best wishes from down under 🦘
Another great video I hope you don’t give up your video work
Fantastic thankyou, I enjoyed that, people think they no best,
Thanks Warren
You bet.
The old Cat did her job well. I hope the owner goes w/ the refresh.
Dam good job Warren if it was me I would fix it.that is a real good semi right there.sam
What I did on a Leyland engine , head removed, sump removed, filled the block with neat anti freeze. left it for an hour, then blue drips of anti freeze came past the liner seals on two defective liners
One of the best engines cat built
Thanks warren!
Thank you for the amazing content I especially enjoy your stories from the good old days.
Let's not forget those pesky adapters that bridge the injection lines to the nozzle, that can cause a miss. Learned that the hard way once upon a time.
My first Pete, 1982 had a A model motor,it was great on fuel,the bad part was Peterbilts then had metal roofs,that was the not so good part of that trk,Peterbilts after that one was all glass roofs, that solved my problem.