LOL whenever I get a scam call I always answer this is Officer Johnson State Police what is your emergency. You never hear someone hang up so fast in your life!😁
Runs pretty dang good. Sounds good. The comedians really know how to deal with the scam phone calls. What I want to do is tell them whoever they are calling for has passed away and go on a rant over the phone and keep them tied up for a bit.
Brilliant way to address scammers. I am really going to unload a ton of pig manure on someone's front driveway one day. 😂 Thank you forvthe video. I love those old CAT dozers.
Another Great Video, Warren. On top of the mechanical knowledge that is shared on your Channel, I really appreciate your stories and sense of humor. I had to laugh about the telemarketer comments, you know you have done your job when they hang up.
3/5/24..Great video finalizing engine work on this particular CAT D4. Also had big belly laugh at your report with telemarketer..."you give me Your address...so you could 'make a 'deposit' on her front porch!' LOL !😂🎉 Always enjoy your educational commentary & your incredible work ethic & attitude! ✅️A+ Anxious to see/hear this D4 start & run after that 'new' Radiator is in...stay safe & carry on!🔧⚙️🔩🍺😊
Thanks Warren, you always put up good material, and try to give good tips. I know that scam caller wasn't expecting you to say you were gonna come shit on her porch, that's a good one lol. G-d bless.
I always like your videos. You're a whizz at everything. I'm not a big proponent of RTV but when I'm trying to mate vertical surfaces I'll put a small squirt of RTV on each corner just enough to hold that gasket to one of the mating surfaces. Then I can make the final alignment when installing the bolts.
Great work, Warren love watching your videos. I run my own shop and have learned a lot about how to diagnose and repair different equipment. Keep up the good work.
Nice come back on the scam call, I love it, I used to ask them for their company name and address, when they ask why I would want that I would say that I have to account for every hour of production through out the day, that our rate was $150 p/h and a min bill of $75 for 1/2 hr and under I needed to send an invoice for billing to account for production time, not to mention your call took me off a paying job that’s on a deadline, I always, without failure got a “CLICK” on the other end. 😏😉😂 I enjoy your videos, appreciate your walk thrus on the reassembly and the time and effort you put into the videos.
the engine sounds super nice. 100psi sounds like alot. hopefully the bearing arent too tight but you'd know sliding them in if they were I guess. It sounds brand new
Hello Warren. The injectors on our D4D are the same but for the inserts that hold them in. There's a tool with splines on for tietening the injector in.
I worked in an automotive machine shop and would answer the phone every once in a while, they would ask to speak to the owner I would tell them he went out to the woods to shit and the hogs ate him. They didn't like that. Warren it's good to see your still around, looks like your very busy. It is so nice to see someone that knows how to use a torque wrench, most of the guys on TH-cam junk it like there, you know what.
Sir I have to say with tung and cheak as you did with the teq and savy in your response to the woman who called from the sunshine state of Florida request for your home address you handled it with the upmost respect as any schollar and gentleman with have your knowledge and expertise would lol well done
Great video Warren glad to see this little dozer coming to gether. Glad to hear it start and run without much trouble. Oil pressure is Wow never seen it that high on one of these little engines. Looking forward to your next video stay safe Warren.
Hey Warren. Another great job done by the master!! 100 pounds does sound like a lot for oil pressure. I’m sure that too much can be as bad as too little. Thanks much for the video.
Warren, you asked a few videos ago what we liked to watch on TH-cam... Of course, No 1 is you (goes without saying), but we also watch some you mentioned like Kurtis in Australia (CEE), I C Weld, Snowball Engineering in England. Also watch Simple Living Alaska (but can't really see how they manage to fund their lifestyle). Just discovered a new one from England - SHED RACING with Ivan Dutton, retired racing driver - I think you'd enjoy his stuff.
👍👍👍👍...i like that approach with the scam calls...i think i might , perhaps try that,...with the porch...and the shit... thanks for another video...see ya on the next 👍👍👊
Thinking about it, Warren would be one of the best guys to be with on a submarine. Not gay and he can fix anything. Those are probably the top 2 traits you want in a submariner lmfao
Hay Warren did you see any video of wreckers pulling tractor trailers out of the snow banks caught in the blizzard. Seems to me the stress Put onthe tractor could definitely cause damage. A wrecker operator when asked about the truck drivers said most don’t speak English and have never seen snow.
Hey Warren I was just wondering how often do you have your torque wrench recalibrated? I noticed you use it quite a bit and I took mine in not too awful long ago because somebody recommended that and I was blown away how far off it was. Anyway seems to run good brother I'm amazed every time I watch one of your videos.
Warren. Do you have 1/4 drive universal joint sockets in 1/4", 5/16" and 3/8. I put those on my socket driver handle. To tighten worm drive hose clamps. I do bevel the outside of the 1/4" socket to fit up on the hex closer
Hey Warren im working on a 3208 cat and having trouble finding a crank damper pully aka harmonic balancer. Have you ever used damper doctor in redding Ca to have a damper rebuilt?? If not No big deal though id ask you appreciate it Thank you sir!
Your scammer response - 😂 Whatever we can do to waste their time and perhaps get them pee their undies just a little and repent, such as: as if whispering to someone else "the trace is almost there...yes...there they are ... yes ... YES."
I got a car warranty call and ask for a quote. 2005 ford GT. The guy said i love mustangs. I replied i did not say mustang. I was making this all up on the fly. I said jay leno got the first one. Bill Ford got the second i got the third. He quoted me $2500.00 i said ill call bill ford and see if ford can extend. Their coverage. A few months later they called back. I am so glad you called. I mailed your company a check but i never received any paperwork. What was stange in your guy had me make the check out to Cash. After i mailed it i looked up the address its a house in florida. I am still making this up on the fly. You will have to put a stop payment. I tried but it was already cashed at a liquor store i know this is the same company as i have caller ID. Click they hung up. Then they called back with their caller id blocked. I daid whats this. Some kind of bunco scam. Blocking your phone number i know the chief of police. I am going to ask him. I never got another car warranty call.
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
Going to remember the next time I get a scam call to ask for their address.. Might have to go over and take a dump on the porch Lol...🤣🤣🤣
LOL whenever I get a scam call I always answer this is Officer Johnson State Police what is your emergency.
You never hear someone hang up so fast in your life!😁
Not only is your work ability outstanding but your sense of humor makes me keep coming back watching your videos
I read something in VIZ (the adult comic) if you want rid of a scam caller, hand your phone to a toddler and tell them it's Santa. 😂
Runs pretty dang good. Sounds good. The comedians really know how to deal with the scam phone calls. What I want to do is tell them whoever they are calling for has passed away and go on a rant over the phone and keep them tied up for a bit.
I had my wife listen to you telling us about the call from Florida. She laughed her ass off, thought it was so funny.
Thanks for the video Warren. Your humor gets me every time. 😂😂 Appreciate the time/effort.
HI warren thanks for all the video's you take time to upload all info and content much appreciated
Brilliant way to address scammers. I am really going to unload a ton of pig manure on someone's front driveway one day. 😂 Thank you forvthe video. I love those old CAT dozers.
3304 & 3306 old engine's that made CAT'S name
today Warren you have won the highest award I have given your shit on the porch what a smile I that gave me thats a good one thanks
You've just entered the no shit zone,lol, that's a good one.
times have really changed, people dont even want you to shit on their porch anymore!
Lol
Another Great Video, Warren. On top of the mechanical knowledge that is shared on your Channel, I really appreciate your stories and sense of humor. I had to laugh about the telemarketer comments, you know you have done your job when they hang up.
I would like to let you know that you have so much natural teaching skills
3/5/24..Great video finalizing engine work on this particular CAT D4. Also had big belly laugh at your report with telemarketer..."you give me Your address...so you could 'make a 'deposit' on her front porch!' LOL !😂🎉 Always enjoy your educational commentary & your incredible work ethic & attitude! ✅️A+ Anxious to see/hear this D4 start & run after that 'new' Radiator is in...stay safe & carry on!🔧⚙️🔩🍺😊
Nice to see Les Claypool is staying active.
Thanks for the video! It seems your happier working on real iron instead of plastic and wires.
Nice to see that gauge pegged to its limit .
Thanks Warren, you always put up good material, and try to give good tips. I know that scam caller wasn't expecting you to say you were gonna come shit on her porch, that's a good one lol. G-d bless.
I always like your videos. You're a whizz at everything. I'm not a big proponent of RTV but when I'm trying to mate vertical surfaces I'll put a small squirt of RTV on each corner just enough to hold that gasket to one of the mating surfaces. Then I can make the final alignment when installing the bolts.
Hot porch dumps are the best
Great work, Warren love watching your videos. I run my own shop and have learned a lot about how to diagnose and repair different equipment. Keep up the good work.
It's a runner you are always worth the time to watch.
Nice come back on the scam call, I love it, I used to ask them for their company name and address, when they ask why I would want that I would say that I have to account for every hour of production through out the day, that our rate was $150 p/h and a min bill of $75 for 1/2 hr and under I needed to send an invoice for billing to account for production time, not to mention your call took me off a paying job that’s on a deadline, I always, without failure got a “CLICK” on the other end. 😏😉😂 I enjoy your videos, appreciate your walk thrus on the reassembly and the time and effort you put into the videos.
Nice job on a very uncomfortable and hard to get to engine. Thank you for bringing us along.
Ways to do that when we were young take a crap on their front porch and put greetings from Rudolph it was always around Christmas time
I found that a little hi-tack cement would hold those gaskets in place, otherwise they could be a pain.
Well done warren. Another one done for another life
I am just commenting to feed the algorithm Warren. Thanks for sharing.
Best Wishes to You and Your Family.
Warren is a wrenching machine nice job
Thanks warren 👍👍. Greetings from the Netherlands😉
the engine sounds super nice. 100psi sounds like alot. hopefully the bearing arent too tight but you'd know sliding them in if they were I guess. It sounds brand new
Morning, Warren. Kindest regards 🇨🇦🇨🇦
Hello Warren. The injectors on our D4D are the same but for the inserts that hold them in. There's a tool with splines on for tietening the injector in.
Seems to be a lot of those scam calls about at the moment 😯
Looks like you are making good progress on the cat warren .
Sounds great .👍👍👍👍
Dude cannot you worked the whole time without tapping up that wire out of your way!!! too funny!
I worked in an automotive machine shop and would answer the phone every once in a while, they would ask to speak to the owner I would tell them he went out to the woods to shit and the hogs ate him.
They didn't like that.
Warren it's good to see your still around, looks like your very busy. It is so nice to see someone that knows how to use a torque wrench, most of the guys on TH-cam junk it like there, you know what.
Hi Warren thanks for the update
Looks good, thanks for the update
Dont forget to reinstall those pesky block plugs the "machinists" always leave out. :)
Stay warm brother!
Man that runs good! Good job!
Very good , going to use that shiting on your porch 😂😂😂😂, great work, thanks for sharing 👍💨💨
Thanks Warren
Sir I have to say with tung and cheak as you did with the teq and savy in your response to the woman who called from the sunshine state of Florida request for your home address you handled it with the upmost respect as any schollar and gentleman with have your knowledge and expertise would lol well done
Awsome video Warren, thanks for sharing
Always learning from your videos . Thankyou
Safe travels bud 🎉🎉
Great video Warren glad to see this little dozer coming to gether. Glad to hear it start and run without much trouble. Oil pressure is Wow never seen it that high on one of these little engines. Looking forward to your next video stay safe Warren.
Thanks Warren, always nice to hear the engines going 👍
Looking Good
Nice jib Warren. Got part 2 up. Pretty Sweet sounding. Get her done baby.
Thanks for the spam tip can’t wait for the next call
Hey Warren. Another great job done by the master!! 100 pounds does sound like a lot for oil pressure. I’m sure that too much can be as bad as too little. Thanks much for the video.
Great work Warren, I enjoyed your telephone scam call solution.
Another great Video 👍👍
Great video thanks for sharing
Warren, you asked a few videos ago what we liked to watch on TH-cam... Of course, No 1 is you (goes without saying), but we also watch some you mentioned like Kurtis in Australia (CEE), I C Weld, Snowball Engineering in England. Also watch Simple Living Alaska (but can't really see how they manage to fund their lifestyle). Just discovered a new one from England - SHED RACING with Ivan Dutton, retired racing driver - I think you'd enjoy his stuff.
The engine sounds brand new, good job Warren.
Sounds good driver.
LMAO, that's how you take care of telemarketers when they call you.
good vid warren
"shit on your front porch" 😂
Thanks for another great video Warren🥰
A MASTER AT WORK !
Sounds good after your refurb
Thank you.
Nice job Warren
Very nice job Warren another one down the road
You're the best dude......i get calls all the time about medicare and get totally vulgar on the phone till they hang up..im with ya
👍👍👍👍...i like that approach with the scam calls...i think i might , perhaps try that,...with the porch...and the shit... thanks for another video...see ya on the next 👍👍👊
Got er done! 😊
Thanks for the deets...
100 psi gauge pegged at idle is way over spec, even if cold, might want to check the pressure relief
Thinking about it, Warren would be one of the best guys to be with on a submarine. Not gay and he can fix anything. Those are probably the top 2 traits you want in a submariner lmfao
OP Relief Valve
How much oil pressure, all of it. Good running Cat. Great work Warren, your the best.
Hay Warren did you see any video of wreckers pulling tractor trailers out of the snow banks caught in the blizzard. Seems to me the stress Put onthe tractor could definitely cause damage. A wrecker operator when asked about the truck drivers said most don’t speak English and have never seen snow.
👍
👍👍👍👍👍
LMAO...I will try that with my next spam call.
Where there is smoke, there must be farr!!!
25:30 Must be an optical illusion where the gear teeth look really torn up.
Gotta mess with scam callers by going "Hello this is (fake name here) with (your local county/state police dpt) how can I help you today?" haha!
Hey Warren I was just wondering how often do you have your torque wrench recalibrated? I noticed you use it quite a bit and I took mine in not too awful long ago because somebody recommended that and I was blown away how far off it was. Anyway seems to run good brother I'm amazed every time I watch one of your videos.
Nice job shit I got excited when she fired
I tell my friends to call twice. I won't answer a number I don't recognize. Scammers don't call twice.
Warren. Do you have 1/4 drive universal joint sockets in 1/4", 5/16" and 3/8. I put those on my socket driver handle. To tighten worm drive hose clamps. I do bevel the outside of the 1/4" socket to fit up on the hex closer
My son wants to know what brand jumpsuit you are using.
Hey Warren im working on a 3208 cat and having trouble finding a crank damper pully aka harmonic balancer. Have you ever used damper doctor in redding Ca to have a damper rebuilt?? If not No big deal though id ask you appreciate it Thank you sir!
Do you ever use gasket sealer/compound?
👍👍👍🇺🇸🇺🇸🇺🇸
Hmmm ! dashboard pox ?
Warren have you tried a little bit of grease on the gaskets to help keep them in place
Hahahaha
Well I guess nobody likes shit on porch. Well done👍
lol warren
The occasional times that I that I answer 'Spam' or 'Telemarketer' calls, I tell them to get off their asses and get a 'real' job!
I think I’m first
Your scammer response - 😂 Whatever we can do to waste their time and perhaps get them pee their undies just a little and repent, such as: as if whispering to someone else "the trace is almost there...yes...there they are ... yes ... YES."
Not a better sound than a good ole cat.
For the love of God, why don't you tape that white wire up hanging above the motor it has been messing with you from day one.😅
I got a car warranty call and ask for a quote. 2005 ford GT. The guy said i love mustangs. I replied i did not say mustang. I was making this all up on the fly. I said jay leno got the first one. Bill Ford got the second i got the third. He quoted me $2500.00 i said ill call bill ford and see if ford can extend. Their coverage. A few months later they called back. I am so glad you called. I mailed your company a check but i never received any paperwork. What was stange in your guy had me make the check out to Cash. After i mailed it i looked up the address its a house in florida. I am still making this up on the fly. You will have to put a stop payment. I tried but it was already cashed at a liquor store i know this is the same company as i have caller ID. Click they hung up. Then they called back with their caller id blocked. I daid whats this. Some kind of bunco scam. Blocking your phone number i know the chief of police. I am going to ask him. I never got another car warranty call.