Thank you. Your video just helped me fix my horn. My daughters and I have been driving for months without a horn. Your video was so easy to understand, my relay was just loose. I pushed it in and now I can drive more safely with my horn. Thank you. ✌🏾♥️🖖🏾🌻
El Imparcial • Theres a ground wire at the bottom of the battery tray. Is held down by a 9/16 bolt head. Take the battery out. Find the 6 bolts holding down that tray. Find the bolt holding down the ground wire. You can hook up another wire with an eye to that same ground wire to get the ground you need for your horn ground. From there you can cuide the new ground wire to the ( horn's relay switch contact point ). Check to see after you connect it. To hear if the horn will functión ok. Hope it works.
Thanks for the video, great and practical information! I was easily able to identity the problem from this video. The information applicable for the 2009 - 2011 Nissan X-trail sold outside of the US.
At the end you show the horn wire some one pulled mine to try and stop it from going off it did not help had to take fuse out my question is how do I put that wire back together? Thanks
I can make the horn work by removing the relay and jumping from 1 to 3 just like you did, and the hotn worked. I tried a new relay, but it still didn't work. The weird thing is, i can push the relay down real hard, and the horn will beep. What do you think the problem could be?
As an alternative to having a helper press the horn, you can hit the panic button on the key fob, which will cause the horn to honk repeatedly--you can confirm it's working by seeing the headlights flash.
Alright, so if when pressing the lock button on the fob the horn blows, but when pressing the button in the vehicle it does not. Can it still be a bad relay? Or am I looking at a bad horn switch in steering column
Thanks for sharing. My gf's 2013 rogue just over night started flashing an air bag symbol & the horn just stopped working like a year later.still beeps when u lock it with the key but no horn & blowrr motor will cut off seemingly on its own. Im thinking ground /wiring issue?
@dingdong7777777 nope still blinking away lol. Since then shes had the blower motor & resistor go out,dead battery,wheel bearing hub replaced. And of course i got stuckdoing all of this. But nope,that bad boy is staying on for the long haul 😅
a blonde??...whats that mean?....my mother is a blond and she has an iq over 160 and used to belong to mensa.....be proud, say it LOUD..."I am a blond, and i can rebuild a '57 chevy from scratch"....while tripping on acid.
First off, thanks for the video! Is the horn related to the lock on the key fob? The reason I ask is when I press the lock button on the key fob I hear the horn, but when I push the actual horn on the steering wheel nothing happens? TIA
Did you ever get it fixed? My wife's horn stopped working yesterday and after doing the troubleshooting I found but the horn sounded when I jumped the two spots. I'm thinking I have to replace the relay itself and see if it gets the job done.
Also having the same issue. Touched the two spots and the horn worked, bought a new relay and horn still isn't working. So what's the issue now? Helpppp
Hi, question. I put a new 10a fuse in the horn slot. As soon as I click the lock button it blows up. If I activate the alarm, the fuse blows. Any ideas why this isnhappebinm
gtubyyy • Good one. Starting at the horn wiring. Then going down the wiring to the horn's fuse. If everything checks ok. Then it has to be a short circuit on the horn wiring inside the steering wheel contact points.
First off, thank you for the guidance on how to find, remove and take off the horn relay. I followed all your tips and I’m still having the “no horn”. I did test the horn by bypassing the connections and the horn honked fine. I also ohmed out the fuse and it was good. My question is… do you think installing an aftermarket relay from Auto Zone be the issue? I’ve heard that using a non OEM Nissan part can be an issue. The next question would be if it could be anything behind the steering wheel? Btw, my car is a 2012 Rogue.
@@Silenceplz595 I had a mechanic tell me it’s the clock spring in the steering wheel. I haven’t fixed it yet. It’s kinda expensive so I’m saving up for the part and labor which will run close to 500 bucks. I’m not desperate to get it fixed since inspection isn’t until April of next year.
yotaman2112 • The clock spring ?. So there's a clock:spring in the steering column _ ??. I would like to see that clock spring for myself. One of these days. I guess !. 500.00 Big Ones !! To actually change the clock spring. No respects for the dollar. Commie OBIDENINFLATION is completely - OUT OF CONTROL. Absolutely no respect for the customer to say the least ! !
At the end you show the horn wire some one pulled mine to try and stop it from going off it did not help had to take fuse out my question is how do I put that wire back together? Thanks
Thank you. Your video just helped me fix my horn. My daughters and I have been driving for months without a horn. Your video was so easy to understand, my relay was just loose. I pushed it in and now I can drive more safely with my horn. Thank you. ✌🏾♥️🖖🏾🌻
This was so helpful! I have been trying to troubleshoot this issue for a week and your video pinpointed the problem for me. Thank you!
Truly appreciate your time understanding my horn issue. You have served me well.
Thanks
Thank you so much! Just figured out the problem with your shorting idea very fast!
El Imparcial • Theres a ground wire at the bottom of the battery tray. Is held down by a 9/16 bolt head. Take the battery out. Find the 6 bolts holding down that tray. Find the bolt holding down the ground wire. You can hook up another wire with an eye to that same ground wire to get the ground you need for your horn ground. From there you can cuide the new ground wire to the ( horn's relay switch contact point ). Check to see after you connect it. To hear if the horn will functión ok. Hope it works.
Thanks for the video, great and practical information! I was easily able to identity the problem from this video.
The information applicable for the 2009 - 2011 Nissan X-trail sold outside of the US.
I finally fixed mine... it was the relay thats bad!
Thanks for the help bro
Thank you so much! My car was honking at every turn and people were starring at me.... it was so embarrassing. Now I don't have to worry about it.
My 2008 rogue is doing this now...the alarm box works when locking...now the horn is honking at every turn...embarrassing is an understatement 😭😭😭😭😭😭
What was the issue?
steering wheel clock spring i belive very cheap at ebay just make sure disconnect the battery because the airbag
Can u show us how to take off the steering wheel to check the horn
At the end you show the horn wire some one pulled mine to try and stop it from going off it did not help had to take fuse out my question is how do I put that wire back together? Thanks
I can make the horn work by removing the relay and jumping from 1 to 3 just like you did, and the hotn worked. I tried a new relay, but it still didn't work. The weird thing is, i can push the relay down real hard, and the horn will beep. What do you think the problem could be?
As an alternative to having a helper press the horn, you can hit the panic button on the key fob, which will cause the horn to honk repeatedly--you can confirm it's working by seeing the headlights flash.
Thank you 🖐️😎
Thanks I got it, your video is very helpful
Alright, so if when pressing the lock button on the fob the horn blows, but when pressing the button in the vehicle it does not. Can it still be a bad relay? Or am I looking at a bad horn switch in steering column
El Imparcial • Btw. The horn's relay ground wire. Is the one on the right side of the relay switch.
Thank you very helpful information if you don’t have a manual to see where the fuse are located for the horn.
I can’t find anything about the fuses in my manual. It says where the box is but not what each fuse is for. I’ve never seen anything like it before.
Thanks for sharing. My gf's 2013 rogue just over night started flashing an air bag symbol & the horn just stopped working like a year later.still beeps when u lock it with the key but no horn & blowrr motor will cut off seemingly on its own. Im thinking ground /wiring issue?
Figure it out?
@dingdong7777777 nope still blinking away lol. Since then shes had the blower motor & resistor go out,dead battery,wheel bearing hub replaced. And of course i got stuckdoing all of this. But nope,that bad boy is staying on for the long haul 😅
Thanks a bunch. Bad relay for sure. Payday tomorrow we'll get one then.
My alarm works, my horn from the inside isn't working. What could it be? The fuse?
So my 2014 had the horn go off randomly during the night. If we put the relay back in it starts up again. Any idea how to fix it?
What do you do when you press the relay down and it sounds the horn without anyone pushing the horn in car? I just can't figure it out...
I love my truck but just has so many features for a blonde to try to figure out LOL thank you for your TH-cam teachings to women like me haha
a blonde??...whats that mean?....my mother is a blond and she has an iq over 160 and used to belong to mensa.....be proud, say it LOUD..."I am a blond, and i can rebuild a '57 chevy from scratch"....while tripping on acid.
I noticed my relay doesn’t click but the relay is good . I even put a brand new one . What could it be ? Thanks I’m advance
What should I do if I buy and replace the horn relay and it still not working?
First off, thanks for the video! Is the horn related to the lock on the key fob? The reason I ask is when I press the lock button on the key fob I hear the horn, but when I push the actual horn on the steering wheel nothing happens? TIA
It's likely to be a broken clockspring behind the steering wheel
Nice video. I replaced the relay after jumping the two spots you said horn blow and still not working. Any other thought?
Did you ever get it fixed? My wife's horn stopped working yesterday and after doing the troubleshooting I found but the horn sounded when I jumped the two spots. I'm thinking I have to replace the relay itself and see if it gets the job done.
Also having the same issue. Touched the two spots and the horn worked, bought a new relay and horn still isn't working. So what's the issue now? Helpppp
Could you fix it?
I had to make the effort to sign into my account, like the video and subscribe because the video was that good. Thank you
Aye my man thank you so much figured out what was wrong
Thank you so much
Look here bro My wife has a 2008 Nissan rogue The horn works for the security system that it doesn't work when you push it what what should I do there
Thanks! Very educative
Change my fuse and it still didn’t work what next to do
Thank you. very very helpful
thank you very much kind sir for this helpful information
Can you tapped the relay with out connecting the battery
Good Man
😂 right?
Hi, question. I put a new 10a fuse in the horn slot. As soon as I click the lock button it blows up. If I activate the alarm, the fuse blows. Any ideas why this isnhappebinm
I have the same problem with my car any idea...? Please
DISCONECT THE HORNS IF RELAY CLICKS CHECK FOR SHORTED HORN IF STILL BLOWS RELAY BAD
gtubyyy • Good one. Starting at the horn wiring. Then going down the wiring to the horn's fuse. If everything checks ok. Then it has to be a short circuit on the horn wiring inside the steering wheel contact points.
First off, thank you for the guidance on how to find, remove and take off the horn relay. I followed all your tips and I’m still having the “no horn”. I did test the horn by bypassing the connections and the horn honked fine. I also ohmed out the fuse and it was good. My question is… do you think installing an aftermarket relay from Auto Zone be the issue? I’ve heard that using a non OEM Nissan part can be an issue. The next question would be if it could be anything behind the steering wheel? Btw, my car is a 2012 Rogue.
you problably will get your reply in the next two more years coming ahead bro 🤣
@@rubbermallet3873 23 MORE MONTHS COOL GOT THE AIRBAG OUT WHAT NOW
Did you ever found out the problem
@@Silenceplz595 I had a mechanic tell me it’s the clock spring in the steering wheel. I haven’t fixed it yet. It’s kinda expensive so I’m saving up for the part and labor which will run close to 500 bucks. I’m not desperate to get it fixed since inspection isn’t until April of next year.
yotaman2112 • The clock spring ?. So there's a clock:spring in the steering column _ ??. I would like to see that clock spring for myself. One of these days.
I guess !. 500.00 Big Ones !!
To actually change the clock spring. No respects for the dollar. Commie OBIDENINFLATION is completely - OUT OF CONTROL. Absolutely no respect for the customer to say the least ! !
Lotsa help! TY
Thank you so much!!!
How to ground fuse box?
what kind of markers do you use to make markings? Where can I buy them?
When all of this checks out then the faulty item would be the closcksprint on the wheel itself.
I wish someone would post this same video on a 2012 Nissan Sentra. I haven't found the horn on mine yet.
thank
Can you do this on a 2012 Nissan Cube 🙏🏻🙏🏻🙏🏻
I will as soon as I find one!
I get not graun(-) to the horn telay.
Major help!
Yupe..now I am deaf 😅 I did the short-circuit and now I am deaf lol. But now I can tell is the fuse itself that is not working
At the end you show the horn wire some one pulled mine to try and stop it from going off it did not help had to take fuse out my question is how do I put that wire back together? Thanks