Kev you're amazing i think if i get a 5T i don't think i'll jump mine that but it's cool to see what these rigs can take. Currently i'm saving up for another X-Maxx thanks to you for helping be decide i needed another one.
Great vid yet again Kev. I reallu am constantly amazed that these cars/chassis regarless of brand take as much punishment as they do, that they aren't really designed for, before breaking.
1:29 I have dropped several driveshafts. The rear joint isn't bad. A loud noise, the engine revs and you begin to slow down. The shaft will slap around for a few revs and then the transmission (transfer case for Andy) will spit out the driveshaft and start leaking some fluid. If the front joint goes the shaft can get bent and really whack the bottom of Andy, but I have never lost a front joint.
1:25 Hey Kev, I'm a mechanic and found this online; Typically, driveshafts contain universal joints at the ends. Over time, the grease inside the fittings can disappear, leaving the U Joints all nice and dry, but that isn’t a good thing. When the pieces are not able to turn and move freely, additional strain gets put on them. So much so that the universal joints can break while the vehicle is in motion. In turn, the driveshaft can become disconnected and hit the ground. The issue can be dangerous, as the car won’t be able to drive forward or backward. That would be bad at 100mph!! Also, why are you driving that rust bucket that fast? I can't judge I drive a honda accord with almost 300,000 miles on it well over 120 HAHA
It is amazing how those suspensions take that abuse... I was pretty impressed by the way that blue and white two stroke stuck to the ground without bouncing as if you landed it on the moon...🥴
Kevin. I just wanted to say "thank you for all your help and wisdom" my custom monster truck is up and running. The project started off as a HPI Wheelie King but has evolved into a nice piece of kit. Just the finishing touches to be done but is running. Kev. You are an inspiration. 👍😁
Fun vid to watch 👍. I am also delighted with the longer duration of it. I always prefer vids in between 10 and 18 minutes. That gives me the time to drink a cup of tea without the need for typing or searching another vid. You made my day. Thanks for that kev 👍
If the drive-shaft comes off at high speeds it could cause a roll-over. If you use a "drive-shaft loop" even if the drive-shaft comes off it will keep it from rolling the vehicle.
You could absolutely run alot leaner than 20/1 my dude✌️🤙 might get a few more mph's or kph! Would be awesome to see there 5t geared up a little bit and really get er up high!!
I bought a Baja 5T when they were relatively new, and I am pretty sure that is overall the most fun RC car I have had, for now. All the stuff you could get too, the only thing is that it can be noisy and needs som space. And a bit pricey, especially if you are not careful with the ordering of parts..
Hey Kev can you make a fully custom rc car with the biggest brushless motor you can find? I think it would be awesome to watch you make one that bashes but also goes at least 90mph lol
Is it sad that I am jealous of just his packages being dropped off? I could only wish that I could get that many exciting packages delivered to my place like that.
Can't hate on a man that has built his empire, and having fun all the time. Living the dream. You the man.
Yes your right
You can however hate on the music choice 🙄so annoying
For kevin every second is Christmas 😂
I wish it was like that for me
I wish
@@nicoleviant217 Same
@@lukasvercaempst44 then don't watch it, geeze you don't need to make it negative.
So true
Sweet man! I love the gas powered rc cars. That 2 stroke though!
Dude that losi is the sickest rc ever made! And you just made it look even cooler lol
Love itt!!!everything you do make me want to watch more of your video.. 😁 😁 BTW Can you review drag slash traxxas rc? Pretty plz😊😊
The Losi sounds like a snowmobile It’s amazing 🥹
These videos really make my day ten times better keep doing what your doing there really entertaining 😂👌
The shots from the inside looked nice👍😁
I love that Losi 5T 2.0 what a tough 1/5 gas. And also it looks like it handles and jumps very well.
Losi 5T 2.0 best truck ever made it’s a beast 💪💪💪💪
I'm still waiting for you to jump the XO1 on that ramp :))
it would be like the jump they did on roman atwoods channel over his ware house but straight up into the sky lol.
Have to have a long run up. It would really fly. Now I wanna jump mine lol
How about you buy one and jump it
Same 😂
that will be the record
I don't think I could break an RC in every video even if I tried those skins are EPIC!!!
🤘🏻🤜🏻🤛🏻
Very nice bashing as always, good to see those rigs getting their durability tested!!
Wow great Action, awesome Video about the Losi ! Thanx
It’s always fun watching all of you guys and gals having a good time. That’s what it’s all about.
man, that loud motor really highlights your stabby, all-or-nothing throttle style.
I want to see a parachute 🪂 pop out then release upon landing James Bond style!
Awesome!!! I didn't think the 5T would jump that well lol some really good shots inside the dbxl! Super cool!!
I am honestly shocked at how well that Losi drove and jumped! Keep up the awesome videos!
Entertaining video, the durability is impressive. For such large RC 😎
Hi Kevin 👊
That is some insane jumps dude.
Great video 👍
Love ur show! Love ur enthusiasm for RCs! Watching from 🇺🇸
Kev you're amazing i think if i get a 5T i don't think i'll jump mine that but it's cool to see what these rigs can take. Currently i'm saving up for another X-Maxx thanks to you for helping be decide i needed another one.
I like the way you do your films. Good job!
Great vid yet again Kev. I reallu am constantly amazed that these cars/chassis regarless of brand take as much punishment as they do, that they aren't really designed for, before breaking.
0
⁹⁹⁰0
0
0
Awesome video. That Losi is amazing. Keep the great content coming.
1:29 I have dropped several driveshafts. The rear joint isn't bad. A loud noise, the engine revs and you begin to slow down. The shaft will slap around for a few revs and then the transmission (transfer case for Andy) will spit out the driveshaft and start leaking some fluid. If the front joint goes the shaft can get bent and really whack the bottom of Andy, but I have never lost a front joint.
That losi sounds like a dirt bike 🏍!!
1:25 Hey Kev, I'm a mechanic and found this online; Typically, driveshafts contain universal joints at the ends. Over time, the grease inside the fittings can disappear, leaving the U Joints all nice and dry, but that isn’t a good thing. When the pieces are not able to turn and move freely, additional strain gets put on them. So much so that the universal joints can break while the vehicle is in motion. In turn, the driveshaft can become disconnected and hit the ground. The issue can be dangerous, as the car won’t be able to drive forward or backward.
That would be bad at 100mph!! Also, why are you driving that rust bucket that fast? I can't judge I drive a honda accord with almost 300,000 miles on it well over 120 HAHA
Kygjfhnvgmyvk I'm s a good day for vendetta against
Wow
Hahahaay
Indonesia here 👋
Man I could never jump my 5T like you Kev!! You're an animal brother hahaha
Great video! Losi takes it baby!! Will the Raminator go to the moon???
Kev has set a world record of not breaking anything on an outing !!
Hay kev you hit one million subscribers
Kev-"I've broken nothing all day!!"
Me-"HAHA that's a funny joke"
True true
KeV..ta Tim a l air GÉNIALE..dommage je suis au Québec 😒😅
That 5t is impressive! She took an absolute beating!
My new favourite TH-cam. I dare you to use one of them big controllers like I've got, you see them on model boats and trucks
It is amazing how those suspensions take that abuse... I was pretty impressed by the way that blue and white two stroke stuck to the ground without bouncing as if you landed it on the moon...🥴
Fantastic video 👍👍
Kevin. I just wanted to say "thank you for all your help and wisdom" my custom monster truck is up and running.
The project started off as a HPI Wheelie King but has evolved into a nice piece of kit. Just the finishing touches to be done but is running.
Kev. You are an inspiration. 👍😁
Wheelie King is a good truck. Enjoy!!!
@@MangoJim90
It's going to be fun.
It'll be going over things while my Savage (25) will end up going through things. Another custom job.....
3:57 why is that so fricken cutee
Like dude its litteraly ckickens and their mom
Kev, bud, if that falls off on the front whilst you're driving. Dude, you're GOING TO THE MOON!
@Roger 6.5 C its true
13 minutes not bad! Let’s do 15 minutes Kev!!
12:48 You need one that says: "If you can read this, give us some footage"
i love the gas powered rc car 2 stroke
Fun vid to watch 👍. I am also delighted with the longer duration of it. I always prefer vids in between 10 and 18 minutes. That gives me the time to drink a cup of tea without the need for typing or searching another vid.
You made my day. Thanks for that kev 👍
congrats to everyone who found this comment early
Same
Great vid Kev that was Awesome👍👍
If the drive-shaft comes off at high speeds it could cause a roll-over. If you use a "drive-shaft loop" even if the drive-shaft comes off it will keep it from rolling the vehicle.
it's so cool that your mom let's you do all this cool stuff.
when that driveshaft falls out of Andy, you now have a front wheel drive land rover.
And a battered land rover.
Exactly
BIG MONSTER TRUCK BUILD!!!!! CANT WAIT
You could absolutely run alot leaner than 20/1 my dude✌️🤙 might get a few more mph's or kph! Would be awesome to see there 5t geared up a little bit and really get er up high!!
Best rc channel! Love your videos Kev!
I bought a Baja 5T when they were relatively new, and I am pretty sure that is overall the most fun RC car I have had, for now. All the stuff you could get too, the only thing is that it can be noisy and needs som space. And a bit pricey, especially if you are not careful with the ordering of parts..
yessss!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! please unboxing arrma vorteks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :)
Hey Kev can you make a fully custom rc car with the biggest brushless motor you can find?
I think it would be awesome to watch you make one that bashes but also goes at least 90mph lol
Yeah
Im
Temp
Teted
yay, I love gas and nitros 😍😍
dude where is the 200 mph car we all are waaiting for you to send it TO THE MOON
Hi you PRo😎😎
Is it sad that I am jealous of just his packages being dropped off? I could only wish that I could get that many exciting packages delivered to my place like that.
Passando pra prestigiar aquele like 🤜🤛😉
Really cool stuff! Was actually wondering if I can make my Tamiya Bullhead run that fast. XD never tried modding it tho(dunno if that's possible too).
That 2 stroke Losi sounds awesome!
The losi 5ive was sounding like it was running really lean an needs a taller gear
Nice jump and thay are sooooo big
The onboard camera needs to stay, some good shots from that.
The DBXL jumps well. Epic rc. Love mine. Great vid.
can you do a review on the Traxxas e-Revo 1/16
He bought one and he is still waiting for it to com
Oh ok thanks
Is it just me or does that sound nice 🔥
That losi 5t is literally screaming for a 2 speed box and some thicker diff oils.
yes!!
Yes, normally the 5T 2.0 drifts much more, this one is spinning the inner wheel like crazy
And a fatter tune!!!
@@KevinTalbotTV you went the first nearly 389 hight
"Happy now?" LOL! Indeed yes! Full send!
8:41 Not enough damage, Martin’s not interested!!!
All of my favorite rc cars in one video!!! Could it get any better????!!!!
Those who don’t know the drive shaft starts spinning rapidly and will destroy the whole floor and everything
RC Cars have moved on a long way since I raced them at a high level back in the late 80’s / early 90’s
That Losi is 30 pounds, it's a lot of weight coming at you.
Your chassis skins look so cool!
If that “thing” (driveshaft) falls off you lose linkage power
Good job hahahahahaha
That first person view is epic, just like sitting inside!
No matter how hard I try to not spend all my money on this hobby, I still end up spending wayyyyyy too much money.
i love you make really nice viedios
We call that coming off “instant shit”
4:52 nice camera angle!👌
How else would you get Andy to do a front flip.
...5:20am here in pa., on my wat to my concrete molding job....uggh smelly, worker life lol!!! Keep grinding kev, the content rules!
Same here man, I'm in MA getting ready to go crawl into someone's attic to slap in some HVAC
Uggh just as bad!! Well, be safe and kick ass man!! People like us are needed
@@aggrosaxon459 Same to you man!
Me too, in Va, heading to demo some walls and ceilings out of a school.
@@robsrcinsanity1220 Hell yea man! Take a few good swings for me and smash that school
Can we just appreciate how good kev’s cameraman is.
Great video Kev as always
Losi TUFF baby 🔥 👍✌️
hey kevin you have the best vids on TH-cam wish I could have your job
WoW amazing jump!!!!!next Time the moon with ur rc
These are the greatest promotional any rc company could ever ask for lol im a losi fan boy after seeing this lol
Love your videos!
Keep it going!!!
Kevin, pls post more of your 203mph project plllzzz. Awesome video as always ❤
Nice bro
Those dbxl interior shots are awsome
This is one of your best Vids Kev.
just yesterday i was watching the 2 videos of this car and i couldn’t be more happy about the video!
I`m always watching videos. It`s a good video!
Man that losi took everything you threw at it like it was nothing and it just loved it!!, TO THE MOON 🌙!!!