Lithophane Positive & Negative, Bambu Lab P1P
ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2024
- I printed lithophanes in two different modes, positive and negative. From the lithophane video I made before. One viewer mentioned about positive and negative modes. So I made this video for the record. With my Bambu Lab P1P the solid model didn't work. With 15% infill the print was really good but the contrast wasn't great. I will try to print in the different percentage of the infill to make the better contrast.
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/soundroll/your-l...
License code: IFEU5PBB3TXQV0DM
P.S. I made a mistake setting infill/wall overlap as 100% for the 100% infill print. I will change that and reprint it.
#3dprinting #bambulab #bambulabp1p #ideas #diy
Cool. 👍🏻
you use special filament ?
Should it be 100 % infill for max res. ? or is lower infill nominal ?
Also how do you create the neg and pos files ?
Hello. I am making another video about the infill. I used PLA+. I used 0.2mm layer height. My max res. is 0.08mm but 0.2mm is good enough. For 100% infill I made a mistake. I made infill/wall overlap as 100%. Bambu Lab P1P is a strong machine, which creates what I order.
Oh! This video is showing how to make your image positive or negaive.