When the drawers start coming with a cover or top so you don't have the sockets go flying if you bump the drawer or accidentally trip while carrying them, might consider buying a mechanics set again. Just trying to get the drawer slid back in seems like the sockets want to dance around. Most mechanics sets in a case like this seem to have this flaw. Give us a way to carry the drawer seperately so you don't have to use two hands - that would be nice.
I don't get why people are bitching in the comments... I looked up the old GW 232pc kit (with the grooved top and hinged centered handle) from a year or 2 ago, and saw no difference in the selection of tools, skips, or quality (like any of us could tell a difference through a YT video anyways). Am I wrong? Seems like a good kit to me with little skips for the $$, as the cheaper Craftsman or Husky's were frustrating with the quality of the cases or the sheer amount of filler and skips they had. Thanks for the informative video!
Yeah I don’t have the previous years set, but I doubt I would be able to tell a quality difference between them, if there was any. I think for the money this is a solid kit that is a step up from the craftsman, husky, Kobalt sets.
@@GearSpinTools Absolutely. GW and Tekton are a nice middle-ground where you can tell that they put effort into their kits unlike the cheaper ones, but aren't gonna make you re-mortgage your house like Snap-on, Matco, Mac, etc lol. Personally I'd say Tekton is a bit better than GW, but their 1/4 - 3/8 - 1/2 kits are sold separately and they don't include the screwdriver set or the wrenches in a nice portable all-in-one case. With those added the Tekton route would put you well over $275 probably...
@@GearSpinTools Seems like the 232 set that in this video does go on sale for $200. The 233 set includes 3/8, 1/4 and 1/2 sockets. The 243 piece set, however, goes for $350 or so. At face value, the 232 is the better set. Maybe one of these you can borrow one to review and compare the two sets. Is $150 more worth the extra 10 more pieces?
They certainly wasted a lot of space in the top where the metric wrenches are. Atleast when compared to the Lowes Kobalt set or the Husky set. Still a good little keep in the truck / starter set. Would've liked to have seen some 1/2" drive sockets included.
What I hate about these sets the socket and wrench skips is when you go buy them you have no place to put them in the box. I think that most people would rather pay the extra money to have no skips. I myself try not to buy sets like this cause you are buying the case I would end up throwing away.
This set doesn’t have many skips, there’s a couple skips in the deep sockets but they give you the shallow. And the wrenches don’t have skips, which the standalone 18pc. Gearwrench wrench set does have some skips.
Yeah the only skip that I am surprised about is the deep 12 mm. But I will carry additional tools anyway, so no big deal. Just ordered this tool box on Home Depot, definitely seems like a great deal. Thanks for the video!
Why would they make a 12 point ratchet wrench?! To purposely round heads? I get the 2 times you need a 12 point for rod bolts or driveshaft caps but just sell a specific wrench for it, more money for them anyways. The appeal of a 12 pt on a regular wrench is being more clockable, a ratchet wrench is mostly infinity clickable.
Most ratcheting wrenches are 12 point, not because they are made specifically for 12 point fasteners but because you're usually using them in tight spaces and it's easier to get a 12 point on a fastener then it is a 6 point when you don't have good access.
That's a great looking set. Especially the ratchets and ratcheting wrench set. The case looks well made too.
Thanks
Damn they changed it up quite a bit from previous years
This is a nice set, but the older set was better, no skips, and everything you would use
When the drawers start coming with a cover or top so you don't have the sockets go flying if you bump the drawer or accidentally trip while carrying them, might consider buying a mechanics set again. Just trying to get the drawer slid back in seems like the sockets want to dance around. Most mechanics sets in a case like this seem to have this flaw. Give us a way to carry the drawer seperately so you don't have to use two hands - that would be nice.
I don't get why people are bitching in the comments... I looked up the old GW 232pc kit (with the grooved top and hinged centered handle) from a year or 2 ago, and saw no difference in the selection of tools, skips, or quality (like any of us could tell a difference through a YT video anyways). Am I wrong? Seems like a good kit to me with little skips for the $$, as the cheaper Craftsman or Husky's were frustrating with the quality of the cases or the sheer amount of filler and skips they had. Thanks for the informative video!
Yeah I don’t have the previous years set, but I doubt I would be able to tell a quality difference between them, if there was any. I think for the money this is a solid kit that is a step up from the craftsman, husky, Kobalt sets.
@@GearSpinTools Absolutely. GW and Tekton are a nice middle-ground where you can tell that they put effort into their kits unlike the cheaper ones, but aren't gonna make you re-mortgage your house like Snap-on, Matco, Mac, etc lol. Personally I'd say Tekton is a bit better than GW, but their 1/4 - 3/8 - 1/2 kits are sold separately and they don't include the screwdriver set or the wrenches in a nice portable all-in-one case. With those added the Tekton route would put you well over $275 probably...
Have you compared this to the 243-piece set?
Does this set have 22m for lug nuts or 24mm size sockets?
I don’t have the 243, the highest this set goes up to is a 22m
@@GearSpinTools Seems like the 232 set that in this video does go on sale for $200. The 233 set includes 3/8, 1/4 and 1/2 sockets. The 243 piece set, however, goes for $350 or so. At face value, the 232 is the better set. Maybe one of these you can borrow one to review and compare the two sets. Is $150 more worth the extra 10 more pieces?
They certainly wasted a lot of space in the top where the metric wrenches are. Atleast when compared to the Lowes Kobalt set or the Husky set. Still a good little keep in the truck / starter set. Would've liked to have seen some 1/2" drive sockets included.
The wrenches on the top do take quite a bit of space, but the layout with them all in a row is nice.
Yeah they did atleast make it look nice! @@GearSpinTools
Regular combination wrenches with a offset would of been better and the ratchets should of been hard handles so it would be better long term.
Standard set? Are you referring to SAE, or the standard depth, also known as shallow sockets?
I was referring to SAE
Were do you get that
@@NathanielCera This one was from Home Depot
What I hate about these sets the socket and wrench skips is when you go buy them you have no place to put them in the box. I think that most people would rather pay the extra money to have no skips. I myself try not to buy sets like this cause you are buying the case I would end up throwing away.
This set doesn’t have many skips, there’s a couple skips in the deep sockets but they give you the shallow. And the wrenches don’t have skips, which the standalone 18pc. Gearwrench wrench set does have some skips.
Yeah the only skip that I am surprised about is the deep 12 mm. But I will carry additional tools anyway, so no big deal. Just ordered this tool box on Home Depot, definitely seems like a great deal. Thanks for the video!
YOU THINK IT WILL BE ON SALE FOR MEMORIAL DAY
I believe this set goes on sale every year for Black Friday/Christmas. I don’t remember seeing on sale for any other time.
Gearwrench really went down in quality bad, you should be ashamed Apex
Accidentally dropped the box and it just came apart. So upset right now
Oh no, hopefully you can get it back together.
If milwaukee sell thisbit will be $3356
😂
Nice review but way over priced
There’s definitely cheaper options out there, I personally think the extra quality in this set is worth it.
Why would they make a 12 point ratchet wrench?! To purposely round heads? I get the 2 times you need a 12 point for rod bolts or driveshaft caps but just sell a specific wrench for it, more money for them anyways. The appeal of a 12 pt on a regular wrench is being more clockable, a ratchet wrench is mostly infinity clickable.
A lot of wrenches are 12 point, I think they do it for overall accessibility.
Most ratcheting wrenches are 12 point, not because they are made specifically for 12 point fasteners but because you're usually using them in tight spaces and it's easier to get a 12 point on a fastener then it is a 6 point when you don't have good access.
Old set was better...new sockets look cheap!
I would guess, Chy-na
The ratchets are pieces of poo 💩, the rubber at the end of the ratchet immediately broke off! Pretty much making it useless