SHOP ALL SCOOTER TOOLS AND GEAR I USE: bit.ly/MitchsScooterStuffSHOP Tools I used in this video: Ratchet - amzn.to/2hhmnUs 3" arm extension - amzn.to/2h7ypMl 8mm allen socket - amzn.to/2ENzvei Flathead screwdriver - amzn.to/2jN7lpE Funnel - amzn.to/2HY4m6g Rag / old sock - amzn.to/2Yh8jvg Torque wrench - amzn.to/2Crqq4R Oil pan - amzn.to/2puqMmY 10w-30 engine oil - amzn.to/2pxVR9d
You're the man! I love quick no bullshit videos that get straight to the point. I bought a Honda Elite 80 with 1500 miles and I've already put on 2000 miles. I love it and yes I did change the oil twice but I forgot both times how to do it so that's why I checked your video out. Thanks man!
Thank you for all your time and effort you put into sharing your life with us! Your videos always brighten my day. I ride a Suzuki dr650 now but am soon getting a maxi scooter. I just love cruising around the country side at 45-50 mph. The 400 berg would suit my needs much better. I didn’t even know about them til I found your channel. Thanks again for all the knowledge you share. Have a great day.
Cool scooter! I had an opportunity to buy an Elite 80 with low miles, and the price was fair, but I hesitated and someone else bought it. I think Honda sold a lot of them so something else will come up for sale.
I have a 2004 Elite 80 and I run rotella T6 5w40 in it and runs great also run that oil in all my scooters and motorcycles great stuff give it a try and if you do a valve job on the elite 80 can you post it looks east just tapets I think keep up the good work always helpful.
Thanks for showing use of a torque wrench on a drain plug, a must that is never done in a quickie oil change place. And I'll stop using spit to lube my O-Ring.
I want to get my moped registered but the vin under the floor panel (which is the dumbest place for it) is corroded and missing numbers. What can I do? There has to be another place where the vin is. or can i contact honda to get the missing numbers? Cant get any help. I didnt even think of that when i bought it and it runs great. I just changed the oil and rode it.
You have to put the key in a little slot underneath the sensor you pushed inwards and it changes the sensor from Red to Green. It will pop every 1000 miles back to Red telling you to change the oil
hello I need to change my variator on my 1992 honda elite ch80 I am having trouble finding the lock tool to remove the nut I tried using a regular flywheel spanner wrench but that just damaged my face drive plate any idea of what I can use to keep the hear from spinning ?
2 stroke use two cycle oil, it doesn't have engine oil at all... on scooter it has red light on the dash will come on to tell you to pour 2 stroke oil in the tank... some people put bigger bore on the scooter that oil pump can't handle then they have to mix with gas and two cycle oil together and pour in the gas tank... this scooter Honda Elite 80 is four stroke that has engine oil, oil filter...
Why didn't you recommend installing a magnetic oil drain plug? Especially without any oil filter anyone knowing they exist would have the sense to believe a simple magnetic oil drain plug could possibly prevent catastrophic engine damage. So much so that it's hard to believe manufacturers would build their motor cycles exclusively using magnetic oil drain plugs.. car as well, even with oil filters it seems smart. (Wise)
SHOP ALL SCOOTER TOOLS AND GEAR I USE:
bit.ly/MitchsScooterStuffSHOP
Tools I used in this video:
Ratchet - amzn.to/2hhmnUs
3" arm extension - amzn.to/2h7ypMl
8mm allen socket - amzn.to/2ENzvei
Flathead screwdriver - amzn.to/2jN7lpE
Funnel - amzn.to/2HY4m6g
Rag / old sock - amzn.to/2Yh8jvg
Torque wrench - amzn.to/2Crqq4R
Oil pan - amzn.to/2puqMmY
10w-30 engine oil - amzn.to/2pxVR9d
You're the man! I love quick no bullshit videos that get straight to the point. I bought a Honda Elite 80 with 1500 miles and I've already put on 2000 miles. I love it and yes I did change the oil twice but I forgot both times how to do it so that's why I checked your video out. Thanks man!
Thank you for all your time and effort you put into sharing your life with us! Your videos always brighten my day. I ride a Suzuki dr650 now but am soon getting a maxi scooter. I just love cruising around the country side at 45-50 mph. The 400 berg would suit my needs much better. I didn’t even know about them til I found your channel. Thanks again for all the knowledge you share. Have a great day.
BEST channel for Honda Scooters, Mitch ! - Mike from California.
My buddy Craig Bradley has been working at Hard Rock Cafe in Hawaii for decades....
Thank you Mike!
Good looks bro just got a scooter nap needed to change the oil it’s so simple!
Cool scooter! I had an opportunity to buy an Elite 80 with low miles, and the price was fair, but I hesitated and someone else bought it. I think Honda sold a lot of them so something else will come up for sale.
Hi Mitch i need tall windscreen for an Innova 125 carb model
Thank you, master!!! Change oil every... KMs?
1000 miles. 1600 Km
@@bradleydavis1772 Thanks!!!
@@bradleydavis1772cada 3,000 kms..
I’m about to do this tomorrow on a new to me 88 elite 80. Thanks for the video!!
Thanks for a quality video. Appreciate your time to do this and save me time
I have a 2004 Elite 80 and I run rotella T6 5w40 in it and runs great also run that oil in all my scooters and motorcycles great stuff give it a try and if you do a valve job on the elite 80 can you post it looks east just tapets I think keep up the good work always helpful.
Thanks for the straightforward video. Looking to do this and new tires on mine. What 3.5x10 tires do you recommend? Probably going tubeless too
Thanks for showing use of a torque wrench on a drain plug, a must that is never done in a quickie oil change place. And I'll stop using spit to lube my O-Ring.
I want to get my moped registered but the vin under the floor panel (which is the dumbest place for it) is corroded and missing numbers. What can I do? There has to be another place where the vin is. or can i contact honda to get the missing numbers? Cant get any help. I didnt even think of that when i bought it and it runs great. I just changed the oil and rode it.
Great video. Why was that new oil so dark?
Thanks! Haha it's royal purple oil :)
What the honda lead 50 ss oil engine?
What year is this ch-80?
Super helpful videos, Mitch. Thanks!
Excellent how to videos 🤙
Thanks 👍
Mitch can I use red line synthetic 20-50? I have it left over from motorcycle?
Cool video man :)
Super cool vid..... Very thorough....thanks brother.... 👍
😄🙌🏼 thanks!!
THANX A TRILLION' MITCHLOVE, PEACE & NURSE" LARRY KING, VENICE, FL . 2003 RUNNING STRONG 😀
😊🙌🏼 Stoked!
I cannot find the dipstick or the fill hole only the drain plug what I doin wrong
I changed the oil on my elite now the oil light is red ? It’s the correct oil and amount any idea why ? It was green before I changed it
You have to put the key in a little slot underneath the sensor you pushed inwards and it changes the sensor from Red to Green. It will pop every 1000 miles back to Red telling you to change the oil
Hey Mitch my exhaust pops the scooter is second-hand and was serviced before it was delivered to me. any idea what this could be?
will this work on AF16
He the man
PS. Can find my original coment but if you find a good place to buy parts for these let me know or if you have any extra parts for 99s to 01s
hello I need to change my variator on my 1992 honda elite ch80 I am having trouble finding the lock tool to remove the nut I tried using a regular flywheel spanner wrench but that just damaged my face drive plate any idea of what I can use to keep the hear from spinning ?
make your own lock tool
make your own lock tool
I used an impact. Since, I didn’t have a locking tool.
On 2 strokes there’s no oil filter? And also how often do you have to top off oil because 2 strokes mix oil and gas together right?
2 stroke use two cycle oil, it doesn't have engine oil at all... on scooter it has red light on the dash will come on to tell you to pour 2 stroke oil in the tank... some people put bigger bore on the scooter that oil pump can't handle then they have to mix with gas and two cycle oil together and pour in the gas tank... this scooter Honda Elite 80 is four stroke that has engine oil, oil filter...
Cool man honda rules I'm a goldwing mechanic.
what is the crush washer size mine is leaking i just bought it and need new washer. PLEASE HELP mitch, PS love your videos man
Did you find out what size? I’m looking for the same information
@@billyb2717 unfortunately no. I bought the last full gasket kit and it had one i could measure tomarrow and post size up
@@billyb2717 if in a bind use old one with some tread tape for now should help get ya riding
Awesome man!
Thank you! Cheers!
Why didn't you recommend installing a magnetic oil drain plug? Especially without any oil filter anyone knowing they exist would have the sense to believe a simple magnetic oil drain plug could possibly prevent catastrophic engine damage. So much so that it's hard to believe manufacturers would build their motor cycles exclusively using magnetic oil drain plugs.. car as well, even with oil filters it seems smart. (Wise)
Thanks!
That sock has seen some things
No help