Started out not liking this video, but the more I watched the more innovative stuff you showed (Scangauge in the dash...so cool!), and the better I liked it. Overall great job!
I have a 2008 GX470 too. Mine’s white, and it needs to be repainted. I’m the 2nd owner also, and it had 74k miles from first owner. It’s now up to 149k and I’ve taken this gem criss/cross country multiple times, and towed 6x12 (filled to the brim) cargo trailers, along with a travel trailer at one time. It still runs like a luxury vehicle. I’m in FL too. Lol! I’m tempted to ask Lexus dealer how much a paint job would be. They’d have to strip all of it off first though, and I’m sure they’d want a fortune. Sigh. Hoping to get 300k miles out of it, and it seems like it’s gonna go the distance!
Nice GX! I have the VLINE in my GX as well. Suggestion. Buy a Bluetooth OBD2 reader and "OBD Fusion" on the play store. This will allow you to set up custom gages displayed on your screen. I use mine everyday...
Thanks for the tip! I actually have a scanguage 2 installed in a 3d printed lower panel that gives me real time gauges. But I agree your option would work well too.
THANK YOU-- I enjoy seeing that-- you did an excellent walk around. Some of your ideas I will "borrow"... ha. I was thinking of metaltech bumper with tire carrier in back- and red dog custom in front with winch-- but I kinda like yours just trimmed!! with everything else normal. I will do sliders, and body armor and a lift of 2 inches. I love the light wiring too.. great job!!
I wrote up a long list of differences on ih8mud a while back. I will say it is a tough call. Set a budget and get the best condition one you can for that money. I prefer the more open greenhouse of the 470, it feels more like my old 80 series, great visibility. The 460 has the stronger rear axle, the 8.2. Power between the two is the same due to the weight increase in the 460. Oh and the 460 has cooled seats. LOL
You rubbing on the body mount at all? I have some 255/80/17s (33”) with stock wheels/1.25” spidertrax spacers and I rub on the body mount bad. Even with an Eibach lift
No I don't rub at all! Thats seems excessive for sure with a lift. My guess is that its a combination of needing to adjust the caster of the alignment on the front end and those wheel spacers. I only have about 0.5" more offset with these wheels. You are way more than that. I know some guys run 285s on FJ wheels with no lift. But you can't run them on a high offset wheel because as the wheel is moved outward it increases the radius so it will rub more. Hope that helps. A good shop should be able to max out the caster on the front end. That may help.
@@gx-lc_reviews yeah I have upgraded UCAs so I’ll probably have the alignment shop jam those puppies forward. Probably just went too aggressive with the spacers lol Alright thanks man, happy new year!
I would love a detailed update video on your spare tire carrier. I recently scored 5 almost new 33in BFG K02's for stupid cheap....and my fiance loves the look of that carrier, but I'm worried about the everyday use of having a 33 back there. (its her daily driver)
Sweet score! Yeah I am actually working on an update. It adds weight and my family knows not to slam the door because of it. I guess thats something I should talk about more in the next video.
I probably need to do a video on the rear power vents. I took the motors out of a 100 series land cruiser and installed them. They bolt up but need to be wired in using relays. Switch plate came from a guy in Australia on Facebook. He 3d prints them for the Prado 120.
Could you provide the specs/part numbers/ amounts you ordered for your TNutz bars. I looked and didn't see them anywhere. Thank you. I'm keepin my Silver 2008 on the more stealth overland side. Really like what you did especially for the rack. Thanks for sharing your build its really Nice.
Great vid, enjoyed the walk around and your other reviews. Thx! Does the Grom V-Line2 integrate with the factory controls for climate, audio, info, display, and menu etc?
Hey man, great looking rig! I wanted to ask about the Corolla emblem on your grill. I'm wanting to do the same on mine, but was curious on what year Corolla you got the emblem from? How was it mounted, was it a simple plug and play?
Nice ride! I replaced my factory touch screen w Nav with a Joying unit and lost my climate control, can you tell me what is the Grom system you added? Or could you tell me if there is a way to control my climate without replacing the replacement head unit?
Shopping list at 8020.net Part number 4509-Black (x20) 15 series to 10 series corner bracket One side is sized for the stock 15 series sized roof rack Extrusion, The other side is sized for 10 series crossbars P/N 1020-S (x5) cut to 39.921 Inches (1012 Millimeters) You can pick 1"x1" 1"x2" or 1"x3" I like 1"x2" for weight savings 1014 mm length should squeeze right into place between the stock roof rack's rails. It's a hair under 40" P/N 3386 (x20) Bolt for 15 Series side of bracket P/N 3319 (x20) Bolt for 10 series part of bracket to secure crossbars. These are the cheapie slide in nuts and bolts. Requires removal of factory rails to get them to slide in. 80/20 also offers roll in and drop in options for more money, also in Stainless steel. This shopping list will give you a total of 178$ before tax and shipping. Can be even cheaper with 4 crossbars.
Not that I have found. Thats another reason why I run a scan gauge because it does allow you to calculate the correct speed. But It doesn't change the factory gauge.
Do you know if 265or 275 would also fit in there without modification? I was thinking of ST MAXX's too.. but I AM going to do a lift-- 2 in.. or what about a 275 70R17??? on 8 inch or even 7 inch rims??
Is that the factory roof rack rails? You just removed the crossbars and added the extruded aluminum? Do you have some links to the exact t-bolts or whatever you used?
Hey GX, just curious: Was this model the model with the original nav system where it features the climate control on it (higher trim), or is this the base trim model where it just has the radio & cassette which is easier to replace?
Loving the switch panel. Can you share the details on where to get it? Also, I intend to restore my headlights and also in FL. I'm wondering if clear coating will help.
Hey buddy. Sick ride! Thank you for sharing. But I have a question, would you be kind enough to tell me which Lugnuts you used for your wheels? I would appreciate the information. Have a good night!!
I’ll be running a stock 4runner trd offroad wheels and thinking of going the same size tire you got. Do you think it will rub with my stock suspension? will also be removing the step board and moving the fender liners.
Dude, we gotta get more detail on the t nuts set up on the roof rack. size nuts used? the cross bars from t nuts as well? cause i didnt see them on the website. HELP!
I was wondering if you could give me more info on what you used/did to paint your FJ wheels that gun metal color. Love the look and want to do the same. Sent you a message on Instagram about it, but no response.
Sorry for the delay. Yes rustolium rattle can grey. Just sand them where you want to paint them with a 1000 grit clean it really well and mask off the areas you don’t want paint on.
Im also wondering a little more on how to setup the crossbars like this. WOuld love some more data, im pretty new to 20 alum bars. What hardware puts it into the stock rails?
its probably best to measure. Here is a good start. Part number 4509-Black (x20) 15 series to 10 series corner bracket One side is sized for the stock 15 series sized roof rack Extrusion, The other side is sized for 10 series crossbars P/N 1020-S (x5) cut to 39.921 Inches (1012 Millimeters) You can pick 1"x1" 1"x2" or 1"x3" I like 1"x2" for weight savings 1014 mm length should squeeze right into place between the stock roof rack's rails. It's a hair under 40" P/N 3386 (x20) Bolt for 15 Series side of bracket P/N 3319 (x20) Bolt for 10 series part of bracket to secure crossbars. These are the cheapie slide in nuts and bolts. Requires removal of factory rails to get them to slide in. 80/20 also offers roll in and drop in options for more money, also in Stainless steel.
@@gx-lc_reviews whoa you responded!!! Awesome!!! Since I asked I got 255 80 r17 Falkens , dobinson struts and shocks, bit of liner zip tying and it's amazing! Spare in the back under the bed I built
اللهم صل وسلم على نبينا محمد وعلى آله وصحبه أجمعين عدد ما ذكره الذاكرون وعدد ما غفل عن ذكره الغافلون استغفرالله العظيم واتوب اليه من كل ذنب حسبي الله ونعم الوكيل عليه توكلت وهو رب العرش العظيم ولا حول ولا قوة الا بالله العلي العظيم
Who thumbs down? geez
Nice setup bro! just hit the thumbs up!
One of the most informative videos I've watched on GX!
Keep them coming!
Thanks! Will do! Appreciate it. I am certainly no pro. But figured some folks might like some ideas.
Started out not liking this video, but the more I watched the more innovative stuff you showed (Scangauge in the dash...so cool!), and the better I liked it. Overall great job!
Nice video, I need those armrests in my life!!
Yes you do! haha
Would love to see a video on those power rear vents! 👍👍
Noted! I have photos from the install but no video. But I could still explain it in some more detail.
I have a 2008 GX470 too. Mine’s white, and it needs to be repainted. I’m the 2nd owner also, and it had 74k miles from first owner. It’s now up to 149k and I’ve taken this gem criss/cross country multiple times, and towed 6x12 (filled to the brim) cargo trailers, along with a travel trailer at one time. It still runs like a luxury vehicle. I’m in FL too. Lol! I’m tempted to ask Lexus dealer how much a paint job would be. They’d have to strip all of it off first though, and I’m sure they’d want a fortune. Sigh. Hoping to get 300k miles out of it, and it seems like it’s gonna go the distance!
I have a 2008 in white as well and just hit 100k. Did you ever repaint yours?
Very nice clean build
I'm glad you like it... it is a work in progress.
Awesome setup man, gonna steal some ideas for sure
Thanks! Go for it!
Nicely and tastefully modified👌
Very, very nice vehicule and review, love it!
Thank you very much!
I love this truck gonna do mines all black an change the fog lights also
Beautiful Brotha! its a Pleasure to Own! i have an 08
For sure! I need to get better at doing videos however.
we will all get there some day my friend
Nice GX! I have the VLINE in my GX as well. Suggestion. Buy a Bluetooth OBD2 reader and "OBD Fusion" on the play store. This will allow you to set up custom gages displayed on your screen. I use mine everyday...
Thanks for the tip! I actually have a scanguage 2 installed in a 3d printed lower panel that gives me real time gauges. But I agree your option would work well too.
Very nice build and definitely lots of inspiration.
Nice mods! One suggestion. Get a Lexus front grill from Garage Alpha. You’ll love it!
Dig the FJ rims, not my first thought to try those! Sporty.
THANK YOU-- I enjoy seeing that-- you did an excellent walk around. Some of your ideas I will "borrow"... ha. I was thinking of metaltech bumper with tire carrier in back- and red dog custom in front with winch-- but I kinda like yours just trimmed!! with everything else normal. I will do sliders, and body armor and a lift of 2 inches. I love the light wiring too.. great job!!
GX looks great. I got a Tacoma TRD Off Road and will be getting a GX for more room. Really hard decision between 470 and 460.
I wrote up a long list of differences on ih8mud a while back. I will say it is a tough call. Set a budget and get the best condition one you can for that money. I prefer the more open greenhouse of the 470, it feels more like my old 80 series, great visibility. The 460 has the stronger rear axle, the 8.2. Power between the two is the same due to the weight increase in the 460. Oh and the 460 has cooled seats. LOL
Looks perfect!
So Wal…is that South Walton Beach in Florida along the 30A?
Cool. Would look great with a 1.75" Bils 5100 lift and tricked bags.
Looks fantastic. Great stance.
Thanks!
You rubbing on the body mount at all? I have some 255/80/17s (33”) with stock wheels/1.25” spidertrax spacers and I rub on the body mount bad. Even with an Eibach lift
No I don't rub at all! Thats seems excessive for sure with a lift. My guess is that its a combination of needing to adjust the caster of the alignment on the front end and those wheel spacers. I only have about 0.5" more offset with these wheels. You are way more than that. I know some guys run 285s on FJ wheels with no lift. But you can't run them on a high offset wheel because as the wheel is moved outward it increases the radius so it will rub more. Hope that helps. A good shop should be able to max out the caster on the front end. That may help.
@@gx-lc_reviews yeah I have upgraded UCAs so I’ll probably have the alignment shop jam those puppies forward. Probably just went too aggressive with the spacers lol
Alright thanks man, happy new year!
Nice job!
Thank you! Cheers!
Great vehicle! I am interested on that roofrack
Nice whip!
I would love a detailed update video on your spare tire carrier.
I recently scored 5 almost new 33in BFG K02's for stupid cheap....and my fiance loves the look of that carrier, but I'm worried about the everyday use of having a 33 back there. (its her daily driver)
Sweet score! Yeah I am actually working on an update. It adds weight and my family knows not to slam the door because of it. I guess thats something I should talk about more in the next video.
toyota corolla 😆 dude you rock
nice build. i just brought one
Looks awesome - I like the subtlety of the exterior mods. Where'd you get the switch plate? How you have power vents? Thanks!
I probably need to do a video on the rear power vents. I took the motors out of a 100 series land cruiser and installed them. They bolt up but need to be wired in using relays. Switch plate came from a guy in Australia on Facebook. He 3d prints them for the Prado 120.
I have 285/70/17 on and 17x9 wheel and -6mm offset on no lift on my gx
Nice! Those typically are a little less than 33" tall. But certainly wider.
Could you provide the specs/part numbers/ amounts you ordered for your TNutz bars. I looked and didn't see them anywhere. Thank you. I'm keepin my Silver 2008 on the more stealth overland side. Really like what you did especially for the rack. Thanks for sharing your build its really Nice.
Great vid, enjoyed the walk around and your other reviews. Thx! Does the Grom V-Line2 integrate with the factory controls for climate, audio, info, display, and menu etc?
Yes it does. And works well.
Nice!
Hey man, great looking rig! I wanted to ask about the Corolla emblem on your grill.
I'm wanting to do the same on mine, but was curious on what year Corolla you got the emblem from?
How was it mounted, was it a simple plug and play?
I was wondering the same thing. Couldn’t find any info on google either. :/
Great GX man! Why not making new vids?
Well I am in between GX or LandCruiser right now. So until I get another one I won't have any new videos. But I do plan on fixing that in the future!
@@gx-lc_reviewsdid you sell this one ?
Nice ride! I replaced my factory touch screen w Nav with a Joying unit and lost my climate control, can you tell me what is the Grom system you added? Or could you tell me if there is a way to control my climate without replacing the replacement head unit?
Great video! I am buying a 2004 with 210,000 wish me luck.
You will love it. Just make sure to get all the fluids changed if you don't have record of it being done recently.
33 inch tires without any rubbing?
Toyota is always best and beast auv, pickup truck to xuv
What year Corolla emblem did you get for the Lexus logo replacement?
Great build. What sizes did you order from tnutz and do you know if the roof rails are the same on the 100 series cruiser? Thanks!
Shopping list at 8020.net
Part number 4509-Black (x20) 15 series to 10 series corner bracket
One side is sized for the stock 15 series sized roof rack Extrusion, The other side is sized for 10 series crossbars
P/N 1020-S (x5) cut to 39.921 Inches (1012 Millimeters)
You can pick 1"x1" 1"x2" or 1"x3"
I like 1"x2" for weight savings 1014 mm length should squeeze right into place between the stock roof rack's rails. It's a hair under 40"
P/N 3386 (x20) Bolt for 15 Series side of bracket
P/N 3319 (x20) Bolt for 10 series part of bracket to secure crossbars.
These are the cheapie slide in nuts and bolts. Requires removal of factory rails to get them to slide in. 80/20 also offers roll in and drop in options for more money, also in Stainless steel.
This shopping list will give you a total of 178$ before tax and shipping. Can be even cheaper with 4 crossbars.
Bigger tires mean speedo discrepancy. Is there a way to calibrate speedo? I also own 08 gx but it's stock
Not that I have found. Thats another reason why I run a scan gauge because it does allow you to calculate the correct speed. But It doesn't change the factory gauge.
Hey great video brother,
Could you please send me a link for the navigation upgrade. Thank you.
U got a link for your spare tire ? I want a similar set up for mine. I have a 2011 gx 460
Do you know if 265or 275 would also fit in there without modification? I was thinking of ST MAXX's too.. but I AM going to do a lift-- 2 in.. or what about a 275 70R17??? on 8 inch or even 7 inch rims??
Is that the factory roof rack rails? You just removed the crossbars and added the extruded aluminum? Do you have some links to the exact t-bolts or whatever you used?
Im curious about this build too.
Schweet addition!
Power rear vents? Is that stock on 2008?
Nope, retrofitted the ones from a 100 series land cruiser
Hey GX, just curious: Was this model the model with the original nav system where it features the climate control on it (higher trim), or is this the base trim model where it just has the radio & cassette which is easier to replace?
This one had the factory navigation system. So I added the Grom system to it
Loving the switch panel. Can you share the details on where to get it?
Also, I intend to restore my headlights and also in FL. I'm wondering if clear coating will help.
Get the 3M headlight restore kit . Inexpensive and works well using a drill and 👍👍
Im not following the car play part....seems like audio cut out with parts and equipment that makes that work.
Nice ride! How much did you pay for it!!!
Where did you get your tire rack? very nice
Hey buddy. Sick ride! Thank you for sharing. But I have a question, would you be kind enough to tell me which Lugnuts you used for your wheels? I would appreciate the information. Have a good night!!
They are just the stock lug nuts. All gx470, tacoma, FJs use the same. These are FJ wheels so they use the Toyota/Lexus lugs. 👍👍👍
@@gx-lc_reviews thank you 🤙🙏
Great GX. How much did you buy it for and how long ago? Thnx.
How is the gas mileage on 255 80 17
I run in the 17s but I am not light footed. :)
I’ll be running a stock 4runner trd offroad wheels and thinking of going the same size tire you got. Do you think it will rub with my stock suspension? will also be removing the step board and moving the fender liners.
Dude, we gotta get more detail on the t nuts set up on the roof rack. size nuts used? the cross bars from t nuts as well? cause i didnt see them on the website. HELP!
Can you give us more info on the infotainment system?
Where did you find the Australian with that 3d printed part? Thanks!
He was on facebook years ago. Don't know anymore. Sorry.
What’s the offset on those wheels you have?
Looks great! Which 2nd row floor mats are those?
Those were from Lexus originally I believe.
how's the fuel mileage at the time of filming, with bigger tires but no lift?
How'd you get that carplay on there with the nav? I was only able to swap out the radio on mine
I have a GROM Vline 2 system. It replaces the factory CD changer. It works very well.
I was wondering if you could give me more info on what you used/did to paint your FJ wheels that gun metal color. Love the look and want to do the same. Sent you a message on Instagram about it, but no response.
Sorry for the delay. Yes rustolium rattle can grey. Just sand them where you want to paint them with a 1000 grit clean it really well and mask off the areas you don’t want paint on.
Do you have the link for the toyota emblem?
What info do you have on the 3d Printed Switch Panel???
Wheel spacers won’t help
You on the trail.
What length are your crossbars? I'm thinking of a similar set up.
Im also wondering a little more on how to setup the crossbars like this. WOuld love some more data, im pretty new to 20 alum bars. What hardware puts it into the stock rails?
I will do a little video on them and provide the parts needed to order.
its probably best to measure. Here is a good start.
Part number 4509-Black (x20) 15 series to 10 series corner bracket
One side is sized for the stock 15 series sized roof rack Extrusion, The other side is sized for 10 series crossbars
P/N 1020-S (x5) cut to 39.921 Inches (1012 Millimeters)
You can pick 1"x1" 1"x2" or 1"x3"
I like 1"x2" for weight savings 1014 mm length should squeeze right into place between the stock roof rack's rails. It's a hair under 40"
P/N 3386 (x20) Bolt for 15 Series side of bracket
P/N 3319 (x20) Bolt for 10 series part of bracket to secure crossbars.
These are the cheapie slide in nuts and bolts. Requires removal of factory rails to get them to slide in. 80/20 also offers roll in and drop in options for more money, also in Stainless steel.
Came here to ask this as well! Would love to see some more of it!
Did you install the vline yourself? If so how difficult was it?
Yes I did. Takes a day to do it. Just follow the instructions and plan on being frustrated at times. 😂
how do i get car play like yours for head unit?
GROM VLine 2 is the system.
Thanks for this information!!
Will they rub the original sidesteps?
No they didn’t with a little trimming at the front and removing the mud flap.
@@gx-lc_reviews whoa you responded!!! Awesome!!! Since I asked I got 255 80 r17 Falkens , dobinson struts and shocks, bit of liner zip tying and it's amazing! Spare in the back under the bed I built
اللهم صل وسلم على نبينا محمد وعلى آله وصحبه أجمعين عدد ما ذكره الذاكرون وعدد ما غفل عن ذكره الغافلون
استغفرالله العظيم واتوب اليه من كل ذنب
حسبي الله ونعم الوكيل عليه توكلت وهو رب العرش العظيم
ولا حول ولا قوة الا بالله العلي العظيم