Stick Welding Techniques 7018 5/32"
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- see the full web page here bit.ly/2RuKFrw
Subscribe to my channel for more weekly videos.
www.youtube.co...
Visit my store at weldmongerstor... for TIG Fingers, DVDs, and other quality welding tools.
We have had a few requests for videos using 5/32" 7018.
This video is about a vertical uphill fillet weld using 7018 5/32" diameter electrodes.
Amperage range for this rod is 130-210 and we welded the whole joint out using 140 amps.
The main things to pay attention to on any weld using 7018 are ...
amperage, polarity, arc length, angle of rod, manipulation or technique, and travel speed.
For even more options, check out my Amazon recommended products page at www.amazon.com...
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: / weldmonger
Facebook: / weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingti...
Great video!! All anybody noticed in the comments was Andrew's hood.... nobody noticed how perfect his weld looks while not using a prop for his welding arm! Free arming 5/32 uphill and knocking it outta the park!! You're my hero, Andrew!
JD Brewer agreed that dude is a great welder
I noticed, very good welder he is.....I gotta use both hands and a prop
Honestly
If you're doing a plate test, taking the time to let the plate cool between passes can really be beneficial in preventing undercut and sag. Great video as always, just wanted to add my 2 cents.
Sign of a welder worth his money though is one that approaches the test like they would a weld on a job site, and on a job site where time is money...you can't cool your parts down and constantly be changing your amperage. Want to be a welder that's worth his money...learn to make amazing welds quickly and without constantly changing your amperage. This can be achieved by learning different techniques of rod manipulation for different situations
@@fe8199dead on
I'm a chef of 2 decades. I'm 39, & just got into shipfitting.
I can't express my gratitude enough. My vertical 7018's were garbage. They are getting better.
Thank you so much for these instructional videos.
I don't think I enjoy any other form of welding more than 7018 uphill. This video was spot on in every aspect. You're the best Jody!
Haha, I gotta practice more it’s my least favorite position
Thank you Jodi I requested a 5/32 7018 uphill about 5 or 6 months ago. I still think your welding videos are the best!
This is honestly one of the hardest rods for me to run vertical great video
Thank you for this. It really helps me in between my classes.
You have the pulse of a surgeon man, job well done
Thankyou for using the red line to show the technique you are using..... it’s very helpful
Man I've been watching your videos since I was a first year apprentice when I started ironwork in 2017.as good as the training was in the apprenticeship I'm positive you are the reason I've become as competent as I have at welding. I don't want to say I'm the best welder, not by a Longshot but using your techniques have helped me become a solid welder whenever I weld.
Theres something about stick welding that's so much more satisfying than TIG or MIG
I dont count tig and mig as welding lol
That's coz TIG IS FOR GIRLS MIG IS FOR GIRLS.
@@jiml7933 yep, thats it, tig and mig is just like soldering for plumbers.
I thought the same went to votec ,a year and a half , just getting ready to start on tig, but went out , went a long time making it without tig, but come to find out I didn't realize how important and in demand it is in , so I had to pick it up , wish I'd stayed a little longer in votec and got on some tig, instead of almost 10 years later , most pipe is done now with a tig bead and stick the rest of the way out , and alloys are always mainly done with tig, I know guys that straight tig in the field and can barely weld with anything else making good $$$ , I've relized I best get with the program and get on that tig
@@eharris6347 dude I tig everywhere I possibly can and if I can't tig then I'll mig.
Not too many years ago I learned more from this mans FREE online videos than I did from my welding instructor in college. Which later landed me a job that pays for my house and a new car to this very day. Support this guy.
Judy thanks for bringing Andrew on board! My stick welding is improving after almost giving up on it. Tig was my go to.
hi jody hello adrian greetings from colombia, all welding classes have helped me a lot, help us clarify doubts or any concerns you have, thank you very much for your lessons.
These videos are so helpful. To help my (mainly) hobby welding, I took a beginner's class at the local tech college 25 years ago and was taught a "whip" manipulation for this kind of weld, with 1/8" 7018 (I also have a textbook which recommends a similar method). I had a tough time getting that right and never did perfect the method, partly because I can usually set the position of the work to avoid difficult positions, which has the negative side-effect of eliminating practice time! It is SO good to see not only a completely different method for doing vertical-up fillet welds, but also a functional explanation of why that particular weave works well. This looks easier to "get right" than the method I've always used in the past, and I'm making a note to try this myself.
Always learning something about the process. I never knew this type of angle and uphill was even possible. When starting out you learn that the angle behind in a pull helps push the slag however it's clearly not necessary with rod type and technique.
Is this welding in real time? It seems as though i am traveling faster when i do it. This makes it look so easy.
You’re going faster than that? He’s already going pretty quick for a weave pattern. Unless you’re burning pretty hot like he was up around 140 then you’re probably getting like no penetration.
@@dazdavis7896 I was using 1/8 but i believe i was just running too hot. Think ive bumped it down to 110-115 for uphill. I think my problem was too hot which was causing the metal to drop and bulge up in places and i was moving faster to compensate as opposed to dropping the amps. Think i was at 125 initially but that was 1/8 7018.
@@DXT61 I was just about to ask if you were runnin a 5/32 7018 instead of a 1/8 that woulda made more sense them telling you run it that low…. My Gpa, who got me into welding before I went to school, welded on the railroad for 35 years. Heavy duty 6010, 6011, 6013, 7018 welding on the train cars and what not, he always told me it’s better to burn too hot than too cold.
@@dazdavis7896 no penetration with 5/32 stick?
@@irondiver292 uh, if you’re going to fast, yes. But apparently you don’t read the comments I thought he was using a 7018 til he clarified that.
Джони. Отличное видео. Смотрю ваше видео уже давно. Собственно по ним и научился варить агроном. Как вы говорили даже простая горелка с контактным поджигом. В руках профессионала может выполнять 90 %. Всех работ.
Вашы видео очень познавательный для тех кто идёт по нелёгкому пути сварщика.
Lol. You run 5/32 7018 the same way I did on ships. That technique is the best to let the puddle cool down enough to not drip down lol. Great video man. You are a great teacher.
What a great lesson in stick welding. I have much to learn if I am to master stick welding with my everlast stick welder
I am gojng to try some of these techniques tonight I am learning level 2 stick welding and need to do a fillet uphill, my tutor said to do a Christmas tree weave pattern I will ask him if I can do the Z pattern and upside down V instead plenty of things to try just from this video alone
This video is so awesome its so good on welding thats why welding is so nice to be a job more challenges on different position stick welding is one of the hardest on types of welding
Great video 👍👍
When you run stringers you can get a flatter bead stack by watching where the arc light shines off the ridge top of the previous bead and washing your metal up to but not past that line.
Thank for video clips 👍
Most useful. Thanks as always Jody. :)
Love Andrew's mask!
If anyone here at this channel reads this: 1. Thank you for your excellent tips. 2. What camera/ lens/ equipment are you folks using to get such excellent visuals of your welds?
Dear Sr I am a subcriber from Honduras and here we don't really have access to that kind of welding machinery due the prices here are 30 times yours in the USA . I hope you can make a welding review with the Lincoln stick welder that is the most popular welding machine here in Honduras. Thanks alot. I do really learn with your videos. Muchas gracias. Desde Honduras .
I have 45lb of Lincoln 5/32 7018 in my truck that I almost never run because of I'm scared of blowing holes and such.. This man is hitting a vert on 3/8 steel and he's just erased all my fears. Gonna show off in the near future lol, I like to be able to get a lot more weld in 1 rod too..
just watched this for the third or fourth time, great 5/32 bead uphill, I like stringers because it's hard to make them look good uphill, unless you're well practiced.
New video iquals instant like hehe.
Hello from Brasil.
Great video Jody and Andrew you the man 👊🏻
Always informative!💪🏼👨🏻🏭
I love to weld and getting back to work is good.
Watching a second time, nice work gentlemen.
Me orgulho de fazer parte dos que conseguem desenvolver esta tecnica e execuçao desse lindo trabalho, Good Job , tank you...
You are really good at welding sir, i will lean
Andrew is a sick welder
That much heat and metal on a coupon that small is impressive! 5/32” is no joke to run vertical on big pieces, it’s super tricky on a small piece that saturates quickly with heat!
My hardest issue welding is just finding the right rod for the metal i am welding. I am self taught so sometimes i have to experiment to find the right rod. One of the hardest but most successful welds i ever made was a case hardened steel collar welded to a cast flange on a gas compressor. It ran for years with 150 psi and the vibration of a two stage compressor. Never ever leaked not to bad for self taught in the field. But wish i had more knowledge of the different grades of steel and aluminum it would make choosing rods easier.
First I want to thank you for what you do. well you Please make a video explaining everlast 521 si setting .Especially the mig pulse . I bought one and I see it's a bit complicated. Can you please help me and simplify the settings as much as possible .Especially as the instruction manual is not in my original language
Andrew pushes the weld up at an upward angle. It works and he does a nice job but that seems to spit more BBs than Jodie's "closer to level" approach. It's good to see that there is some forgiveness in rod angle. I think when younger welders first start, they think that they have to help the weld by pushing it uphill. It become a habit that they sometimes never break.
Not unique to younger welders. I know a few oldschoolers who go uphill using the same angle.
Boy you better have that heat on time and be good and fast, that big of rod tends to drip bout half way up. Excellent weld
I was taught by a 65 year old man over 25 years ago how to weld. I've never been to school for welding. I use an old style Jackson welding hood. It's not arch flash. It's a typical old school welding hood. I weld Exxon gasoline tankers daily. And milk tankers a lot. The welder I use is a Miller from like 1980. My point is. Why do you need all these fancy welders with all these settings I don't even understand how to work. I'm thinking it's all unnecessary. Oh yeah, I use an old Ideal welder cracker box for welding 7018's. It has no setting at all really just an old dial for heat up and down. I pass welding tests every time they make me do them. With the machines I use everyday. It is what it is I guess.
I am self taught and prefer the old school welders. Both of my Mig's were made in the 1990's, I have a 1984 oil Oxford 180amp cooled AC stick welder and a 2002 Oerlikon Presto 140 G inverter welder which I use a lot in my videos and on farm repairs. Old stuff is perfectly good, no need to spend thousands of $$$$ or ££££ on welders, it is the man or woman working the arc the makes the weld not the machine!
What do you want a medal or something?
Interesting video and demonstration. Always learn something watching your channel. Thanks for sharing.
PS Jim Bollinger from DoRight Fabrication gave you a great shout out at the Summer Bash. He said that yours is about the only welding channel on TH-cam that is spot on all the time. Kudos...
Great stringers. That is the way I was taught.
Thank you for posting/sharing, great video, great camera work, and humble knowledgeable instructor's, always learn from your channel.
👍👍👍...мало знакомых слов, но за то видео шикарное!!!🤝🤝🤝
I realize this may be a specific video request...but can you do one for 8” 13# I-beam welded at 90 degrees to each other and at head hieght? Maybe some tips or tricks for coping one to meet the other would be nice too. I’m still trying to finish a frame to go under a shipping container and I need to weld it together in place since I don’t have any equipment strong enough to lift it where it needs to go.
Very nice cord well applied all excellent my respect for this Master of welding!
great video, very educational. Thanks!
Não entendo nada do q estão falando mais a solda é sensacional aí falamos a mesma língua bom d+++
With 7018 if you don't use the whole rod, taking a file to the end of the rod will help you get started again, ( the flux tends to cover the tip making a restrike harder).
My new toy for it is a cordless grinder.
Great informative video as always, thanks!
Me encantó la técnica, estoy empezando y quedo muy feliz por el tips, me encantaría visitarlos 🤗😉👍💪
F
Love stick welding
Great video
I'VE ALWAYS FELT THAT STRINGERS BEADS ARE STRONGER THAN THE WEAVE IN SMAW,GTAW,FCAW(WITH OR WITHOUT GAS SHIELDING)GMAW.
Good video
Thanks Jody
Uphill 7018 is my Achilles heel 🤣
Grate job
Thank you for video
Definitely need to try these techniques
on vous suit depuit abidjan des videos en plusieur lange ferra l affaire comme le francais mercie pour vos cour.
Great job bro
Could he come back and do a 6-pass vertical up? All stringers
Great work
Very nice welding sir, form Bangladesh.
i have a lot of trouble with arc blow with this size rod on vertical, im going to try a lower voltage like you recommend thanks
Thank you for the lesson
Beautiful root with that 5/32 wire
Thank you guys I like your videos
Nice to video good bhai
Stringer is stronger than wave because of less heat. Proved by some mechanic tests.
“I like it.” - JC. 00:31
Great job
Thanks 👍👍👍👍
Great job. Thank for your help.
I love to pass bend tests its hard but I pass some and I fail some but its great
Thanks again
Is there a video on a flat butt weld using 7018 5/32 no backup, 1/16 gap & landing. With root pass then the same half weave & half stringer cap?
Excelent video, great job
Greateens to both
I noticed Andrew uses a good 30-40 degree push, not the 5-10 degree push used by Jody.
Excelent explanation!!! Greetings from México!!!
Have you tried running AC for 5/32" uphill. I had a teacher tell me about it and it really works. I don't think a lot of places will allow the use of AC but definitely a trick to keep in your back pocket
Hey welding tips and tricks can you do a video on mig welding galvanised steel with a mig welder please
Very nice job!
nice , thanks
Great instructional video, thank you!
Really good video! Thanks
I hate it when you lay your welding helmet on the ground and a steam roller just happens to come by.
Muito bom , essas aulas aumentaram o meu conhecimento. E melhoraram meu acabamento, thankyou.
Who Can answer this question...
Say you have 3/32 and 5/32 7018 rod and both are set to their own respective amps. WHY is 5/32 7018 so much harder to manipulate than 3/32 and what are some techniques
Thanks for this channel
Nice job
Thank you very much 💐💐💐
Hello. I would like to see the socket welding of the pipe in the 5 F position. I did not find this on TH-cam. Can you?
I’m welding a thumb on an excavator and I’m not a professional welder. The instructions say single pass .060 fillet weld. My question is. Isn’t .060 very wide for one pass. What rod and diameter could achieve this?
Jody can you please make a video testing arc force and hot start features on the esab rebel 205 ac/dc. I see the 285 can handle the 5/32 rods. Debating whether to buy 205 but kind of skeptical if it can run a 5/32 6010...once again thank you for sharing your fountain of knowledge!
The 285 is great use one daily
I recently just bought an esab rebel 285ic, what are your impressions about it's weld quality and how it compares to the other machines you've got or usec