Firman Dual Fuel Oil Change: 31 Hours Deep (yes, I'm late)

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ต.ค. 2024

ความคิดเห็น • 26

  • @Onewithsausage
    @Onewithsausage 3 วันที่ผ่านมา

    My motorcycle does the same thing when draining the oil. Nice and clean until the flow slows down. I found I can wrap some aluminum foil around the area to keep the oil going where I want. Nice video! Thanks!

  • @danielfitzpatrick3543
    @danielfitzpatrick3543 7 วันที่ผ่านมา +1

    Does that oil pan and the leveling blocks come with the unit? Or did you have them from something else? Overall opinion of the unit?

  • @nofantasyman
    @nofantasyman 4 หลายเดือนก่อน +3

    Once again. Good tips. Thanks

    • @travelpawsrv
      @travelpawsrv  3 หลายเดือนก่อน +1

      Thank you!!!

  • @davidolson5052
    @davidolson5052 หลายเดือนก่อน

    Have you ever changed the on/off switch on a Firman WHO3242?

  • @bornwestusa
    @bornwestusa หลายเดือนก่อน +2

    post an update if you see metal in the oil at the second oil change!

    • @travelpawsrv
      @travelpawsrv  หลายเดือนก่อน +1

      Excellent idea! I will do that for sure!!

  • @rpsmith
    @rpsmith 21 วันที่ผ่านมา

    8:30 -- Why did you have a lose bolt to the left of the valve cover?

  • @jjkaem83
    @jjkaem83 หลายเดือนก่อน +1

    Do you have to charge the battery before the first use? If so, do you have to charge it every so often?

    • @GeeDee3333
      @GeeDee3333 8 วันที่ผ่านมา

      I didn't on my refurb unit - which also did not include the charger. Reading around the Web, I learned - 1) if you run your generator 1x month for 30 minutes (as advised by most generator mfgs), this should keep your batter charged, too. 2) it is recommended to use a battery maintainer which cycles on and off rather than the plug they included on new units. Harbor Freight has a Cen-Tech one for $10 with great reviews. You may already have one for cars/motorcycles/etc that get stored. On Amazon, you even find a barrel plug pigtail to make a cleaner setup by plugging your maintainer into the port where the charger is supposed to go on the control panel.

    • @MichaelWilson-vf8zn
      @MichaelWilson-vf8zn 7 วันที่ผ่านมา

      @@GeeDee3333 That's what I did with my refurb unit. I already had a spare battery maintainer and a barrel plug. This is one case where my junk electronics hoarding paid off, lol!

  • @gerardford5707
    @gerardford5707 2 หลายเดือนก่อน +3

    the owner's Manual states not to screw the dipstick in to check the oil.

    • @travelpawsrv
      @travelpawsrv  2 หลายเดือนก่อน

      Interesting...I'll have to pull my manual out, I don't remember that LOL thanks!!!

    • @BruhPlz
      @BruhPlz 2 หลายเดือนก่อน +1

      That’s true I was about to say that. There is a drawing showing taking oil measurements without screwing it in completely. So technically your oil level is lower than what it should be.

    • @columbiariversalmonenhance4050
      @columbiariversalmonenhance4050 หลายเดือนก่อน

      That's worth a call to the manufacturer for confirmation. Tech writers are notoriously out of touch with engineers and often inaccurate in their writing. Especially Chinese engineers. Funny thing is if you put in the correct amount of oil... you should be at the correct oil level. Thus, I refer you back to my original thesis about tech writers... 😂 FWIW, I've owned lots of Honda power equipment engines and their clones... I always screwed in the dip stick to read it. That said... you can go 3/4 of a quart of oil here and be fine. Engine isn't going to explode... 😂

    • @BruhPlz
      @BruhPlz หลายเดือนก่อน

      @@columbiariversalmonenhance4050 I verified with support and you’re not supposed to screw it in to read the proper oil level. If you’re screwing it in then your oil is slightly lower than recommended. Trust me I verified with Firman support.

  • @scottpoole2182
    @scottpoole2182 4 หลายเดือนก่อน +2

    I am just going to assume that the squeaky noises during fast-forward is non-stop swearing. 😂

    • @travelpawsrv
      @travelpawsrv  4 หลายเดือนก่อน +1

      actually it was "ouch" and a few swears thrown in because I kept getting burned, it was still hot! LOL

  • @FourMypersonaluse
    @FourMypersonaluse 3 หลายเดือนก่อน +1

    U are wasting oil ,,

    • @travelpawsrv
      @travelpawsrv  3 หลายเดือนก่อน +2

      Hi! I'm not sure I'm following...wasting oil? This was the initial oil change which is 25 hours according to the manual.

    • @FourMypersonaluse
      @FourMypersonaluse 3 หลายเดือนก่อน

      @@travelpawsrv man u all's ,, manuals ,,

    • @travelpawsrv
      @travelpawsrv  3 หลายเดือนก่อน

      @@FourMypersonaluse Nope, and I won't be changing this every 25 hours. 25 hours first change, then every 100 hours after is the plan.🙂

    • @snoopdogie187
      @snoopdogie187 2 หลายเดือนก่อน

      @@FourMypersonaluse It seems to work out to about 25 hours in a cars first oil change! I had to look it up, at about 50 mph, which is the average of my drives I'll say, that is about 1000 miles or so. He has been saying first oil change which is always lower than the rest of them. He even pointed out there was metal in the oil, which isn't common, but common on the first oil change, which is why it is changed so soon.

    • @FourMypersonaluse
      @FourMypersonaluse 2 หลายเดือนก่อน

      @@snoopdogie187 snoopy dogs house is the Dairy queen red roof in 👶🎤🙏👶🎤🙏🖼️🐕🍦