Installing Door Trim and Fascia: How To Build A Shed ep 13
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Come learn how you can build your own shed! In this video I show my technique for installing door trim and fascia.
This video series will show you step-by-step everything required to build an 8' x 16' shed. Are you going to build a shed too? Mash that subscribe button to follow along!
Materials needed:
Trim materials
Nails
Tools required:
Clamps
Saw
Hammer or Nail Gun
Tape measure
Carpenter's square
#Fascia #Trim #ShedTrim #ShedFascia
AmplifyDIY is a channel dedicated to do-it-yourself projects with in-depth tutorials on a wide range of subjects.
New videos are published frequently. Want to make sure you don't miss any? Subscribe now!
www.youtube.co...
Check out the full channel here:
/ amplifydiy
Follow builds in real-time on Instagram!
/ amplifydiy
Great video, one recommendation. When butting up fascia, bevel at 45 degrees to be hide the but line.
Great tip!
Good job and methods when working alone. You make it look easy. When you used the finishing nails to fasten the gable trim to the fascia you can install the upper one angled down and the lower one angled up to lock joint. Nails put straight in can be pried out with trim movement.
Good tip, thanks!
3:01 "nail in in there for realsies this time" hahahahhaha dig it. i started watching these yesterday man. if this is really your first build you are awesome bro. im hooked lol
+Hugo Sanchez LOL - glad you are enjoying the series! I’m no carpenter, just a handy guy not afraid to try bigger projects.
Great video series. You spent quite some time on just the video. thanks. Also noticed you have a new bigger miter saw. Deserved. :)
Using Hardy gloves to install LP... nice...
Thanks for the video!
You're welcome!
Thanks for the thorough reveal of how you built your shed. Planning to us the same siding. What size trim did you go with on your corners?
I believe it was 3.5" trim on the sides. Thanks for watching!
This series is fantastic. Thank you for documenting this, it’s such a huge help! Is there a link to the plans you used? This is exactly what I’m planning now, but I can’t find a good source for reliable plans.
I purchased these plans… I altered a few things, but followed them pretty closely: www.icreatables.com/sheds/8x16-TV-traditional-victorian-shed-plans
should of 45 ed the facia where they meet in corners looks neater
`
Good tip. Thanks, Joe!
Thank you so much for this series! What are the width of fascia and other trim boards? I'm going to purchase same LP trim materials for my shed.
Hi Nikita! The trim boards are a mix of 1x4 and 1x6 (actually 3.5" and 5.5" wide, respectively). I used the wider ones on the corners of the shed and around the outside of the door openings, and the narrower ones were used in the doors themselves. For the fascia, I believe I purchased 16" wide pieces and cut them down to the exact width I needed... something like 13" or 14". Best of luck with your shed!
What tips or tricks do you use when working alone to make the job easier?
Hello. I see you listed the material used in the trim. Is it what you used for the lap siding as well? They look similar.
Yes, the siding is LP SmartSide. It's from the same company and product line that I used for the trim, so everything matches. Thanks for watching!
What brand of trim material did you use?
Great question! I used a product from LP called SmartSide - it's an engineered wood product. You should be able to find it (or something like it from a different brand) at a local building supply company (not necessarily Lowes or Home Depot).
would have used some construction adhesive to join the corners and some screws. trim nails will totally shear off or separate over time. also down the road, instead of using caulk or Spackle to fill the nail holes DAP makes a great product www.homedepot.com/p/DAP-Platinum-Patch-16-oz-Advanced-Exterior-Spackling-Paste-18741/303781000 it has something along the lines of sand (silica maybe?) in it and it is better than spackling, doesn't shrink like caulk, and isn't as hard to apply as wood filler.
Odd question... what kind of camera and software do you use for filming and editing?
Hi Chef - I shoot on a Canon 6Dii, with a Canon 25-105L as my primary lens. I mix in other lenses as needed. I edit with DaVinci Resolve. I'm happy to answer any other questions (odd or otherwise) that you may have. Thanks!
Clamps by the bucket full.. just tack it using nails
eh, then I have more nail holes to fill.
When I put up fiberboard siding it was not blind nailed but face nailed.. so putting a little bit of putty in another nail hole never bothered me. I will say you do very good videos, really diligent and quality work. I assume you never even worked in the trades...
The flashing have to stay out at the head