this was the only video I found that pointed me in the right direction. I have a 2003 Honda Accord, it was a slightly different location, but still right by the oil filter. All of the other videos were either different or not very informative. Thanks for uploading this BOXCHEVY RIDER!
Same I’m gonna check that out I get code of misfire but I changed all spark and coils and fuil injectors my Honda shakes when I put it in gear “D” and shakes when I turn AC on
Hi there, Thanks for putting this video here… you never know who might need just the right piece of information like this video down the road.. I needed it today… 5 years after you put it on TH-cam. Thanks man
Good video. Needed this didn't realize it was behind that shield thing. Thanks. Also, it's the right side of the car not the left.its based off as if you were sitting in the seat driving. Passenger is right drive is left. I know it's weird, but as a mechanic that's how it is. If u say left side for the passenger say, u need a front passenger strut, and u call part store and order the left side it's gonna be for the driver side. Not being a **** just giving you some helpful info since u showed me where this damn sensor was at :)
Having P0339 code on my accord as well, replaced the crankshaft sensor but code still appears and extended cranking still occurs, did you have this same issue?
I recently got this code as I was driving. Engine light came up but I haven't had issues with the driving though. I bought a crank sensor replacement just in case. How goes your car now?
Did you had to do a relearn procedure when after replacing the crank sensor or you just disconnect the negative terminal from the battery before doing the replacement? As far as I know, taking the negative terminal cable off would reset the computer.
I ordered a replacement crank sensor from amazon. Before it arrived, I decided to try a fuel system cleaner. Later that night I was surprised that it turned off the check engine light. The error code it thrown at me before was a P0399. The light been off for the 3rd day now. I figured that it could be a possible carbon build up. I used to have the code P0420 which was a bad catalytic converter but that wasn't the case. I see how important it is to keep the car maintained. I always keep up with the oil changes on schedule as well as other fluids.
Great video helpful . Have Honda CRV . Would the cam sensor be in same location ? Thinking of doing this repair on my vehicle . Getting CEL code is telling me to replace sensor. Had VSA light Triangle Light & Battery light . I changed Battery and alternator already still have issue with sensor code .
You may be thinking of the Camshaft Position Sensors, there's one for the front camshaft and one for the rear camshaft. But there's only one Crankshaft Position Sensor.
Hey I appreciate you partner !! I guess my old junker decided that it was done doing the crank. And of course Honda would put this in the most inconvenient place!!
I apologize I got it confused I'm looking for the camshaft position sensor.....A or B. I clicked the wrong video. SMH. Ty for responding. Respect. Will follow you just for the reply.
this was the only video I found that pointed me in the right direction. I have a 2003 Honda Accord, it was a slightly different location, but still right by the oil filter. All of the other videos were either different or not very informative. Thanks for uploading this BOXCHEVY RIDER!
Same I’m gonna check that out I get code of misfire but I changed all spark and coils and fuil injectors my Honda shakes when I put it in gear “D” and shakes when I turn AC on
Hi there,
Thanks for putting this video here… you never know who might need just the right piece of information like this video down the road..
I needed it today… 5 years after you put it on TH-cam.
Thanks man
Good video. Needed this didn't realize it was behind that shield thing. Thanks. Also, it's the right side of the car not the left.its based off as if you were sitting in the seat driving. Passenger is right drive is left. I know it's weird, but as a mechanic that's how it is. If u say left side for the passenger say, u need a front passenger strut, and u call part store and order the left side it's gonna be for the driver side. Not being a **** just giving you some helpful info since u showed me where this damn sensor was at :)
Thanks! Been searching Google all day, you got me right to it.
I think this just went out on my car. Has to be Winter related. Did you have to drain any fluids prior to removing the sensor?
@@MrFrederickEllington no I didn't.
thanks for taking time to share video,very helpful
thanks this helped, i was looking for this shit for like 30 mins
Thank you sir !
Do you have to take the wheels off in order to change it?
Tyler Watson no. But i did
Can I do this with 1 car jack or do i need a few?
Having P0339 code on my accord as well, replaced the crankshaft sensor but code still appears and extended cranking still occurs, did you have this same issue?
I recently got this code as I was driving. Engine light came up but I haven't had issues with the driving though. I bought a crank sensor replacement just in case. How goes your car now?
Hows ur oil pressure
Check fuel pressure,spark plugs,extc
Thank you..
Did you had to do a relearn procedure when after replacing the crank sensor or you just disconnect the negative terminal from the battery before doing the replacement? As far as I know, taking the negative terminal cable off would reset the computer.
Jus disconnected the terminal.
I ordered a replacement crank sensor from amazon. Before it arrived, I decided to try a fuel system cleaner. Later that night I was surprised that it turned off the check engine light. The error code it thrown at me before was a P0399. The light been off for the 3rd day now. I figured that it could be a possible carbon build up. I used to have the code P0420 which was a bad catalytic converter but that wasn't the case. I see how important it is to keep the car maintained. I always keep up with the oil changes on schedule as well as other fluids.
i changed mine and still have the same problem. do i have to get it reprogrammed?
No programming,but u could have a faulty part or short in wire
Thank You Bud!!
Would this be on the same side on a 2011 accord?
daniel g by oil filter
Great video helpful . Have Honda CRV . Would the cam sensor be in same location ?
Thinking of doing this repair on my vehicle . Getting CEL code is telling me to replace sensor. Had VSA light Triangle Light & Battery light . I changed Battery and alternator already still have issue with sensor code .
tc cravin not sure about the crv but the cam sensor is prob at the top. part of engine more than likely
Can you please come do my crank sensor on a 05 Honda accord 2.4L I'm being told it will take a few hrs to change it
🤞or walk me thru it I'm a single mom with no car knowledge at all and some men (NOT ALL) take advantage of the lack there of
@@boxchevyrider88 Did the error code stay gone permanently after replacing the camshaft position sensor?
@@reesef6030 yup
dont forget you need to relearn the crank shaft after install so that the computer teaches the new sensor.
How you do that?
Hey is this for sensor in Position A? Thank you in advance for a reply.
I dont kno what u mean by position A
You may be thinking of the Camshaft Position Sensors, there's one for the front camshaft and one for the rear camshaft. But there's only one Crankshaft Position Sensor.
Would this be the same for a 2008? Thanks
sciencegenius27 im not sure but alot of things on the 2008 are on 2009 as long as its a 4cyl.
It's the same generation (8th gen), if you have the same 2.4 liter engine the crank position sensor will be the same as well.
Like taking candy from a baby, and I almost paid a mechanic $100.00. The part alone was 80.00plus dang.
Same with Honda acc 2009 v6 3.5l
Gia Thuy Ngo im not sure
Aw I cant change my own :)
What about a 1995?
im not sure exactly. but the older accords crank sensor is located under the lower timing cover
BOXCHEVY RIDER ok thanks, so I'd have to jack the car up like u did urs?
Yes
BOXCHEVY RIDER thanks mate!
Hey I appreciate you partner !! I guess my old junker decided that it was done doing the crank. And of course Honda would put this in the most inconvenient place!!
Same on 2009 Honda Accord EXL V6?
I apologize I got it confused I'm looking for the camshaft position sensor.....A or B. I clicked the wrong video. SMH. Ty for responding. Respect. Will follow you just for the reply.
do u have to drain the engine oil in order to replace this sensor?
skokomurliak i didnt
Thanks bruh
Is this the same thing as a crankshaft sensor
ed z yes it is
This is for code p0341?
I would like to know tha too
Cause i have a honda accord 2006 and i have the same code
They saying to replace cam chaft and crank chaft sensors
I'm also getting the same error code