Fixing the leak on my Glacier Bay bottom load water dispenser!

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 มี.ค. 2018
  • Fixing the leak on my Glacier Bay bottom load water dispenser!
    I had my Glacier Bay bottom load water dispenser on during the winter about 2 or 3 years ago and the power went out on the house the water lines and water tank froze. after this happened the water tank would just poor out water when the pump was running and I thought it was broken for good. I finally got down to working on it and pulled it a part to find out it was just a rubber line that froze and expanded and came off the connecting tube that poor's the water. I worked on the connection and after some time and some donated blood due to cutting my hand on sharp edges I was able to reconnect the rubber tube back onto the water cylinder and secure it with a zip tie or cable tie I used a Phillips screwdriver wire cutters to cut the ties and needle nose plies to tighten the ties.
    The Glacier Bay bottom load water dispenser makes changing empty water bottles a snap. Lifting heavy bottles and cleaning accidental spills are eliminated. Finished in modern gloss black and finger proof stainless steel accents, it is sure to complement any room. With an energy star rating, the patented kettle features uses 70% less energy than traditional always on hot and cold water dispenser.
    Patented energy-saving kettle feature rapidly provides hot water in less than 3 minutes
    Hot, room and cold water dispensing
    Large "fill" area is great for large glasses and pitchers
    Fingerprint resistant stainless steel finish
    Black piano gloss finish (UV coated)
    Anti-boil-dry heating system

ความคิดเห็น • 69

  • @realtacobell
    @realtacobell 2 ปีที่แล้ว +1

    Why is this 13 and a half minutes? Can you summarize in one sentence please? my time is precious to me

  • @luisolivas4911
    @luisolivas4911 2 ปีที่แล้ว +1

    I press the red button so the hot water turns on and it does jot work does not do anything and no hot water comes out unless that red button starts flashing. Cold water is just fine any idea how I can fix that?

  • @soytitv4114
    @soytitv4114 3 ปีที่แล้ว

    My Primo stand water dispenser is leaking. When my dispenser is ON my water tank continues dropping water, but when I unplug the dispenser, the tank stop dropping water and the leak stop...thanks

  • @mali6616
    @mali6616 4 ปีที่แล้ว +2

    How do you even install the 5 gallon bottle? If I lock the handle up bottle won’t fit under the dispenser

  • @cristianornelas3170
    @cristianornelas3170 2 ปีที่แล้ว +1

    I just got one, have a new filled tank in there and when I plug it in it seems as it wants to suction up, then the yellow light starts flashing.

  • @alexander_8473
    @alexander_8473 5 ปีที่แล้ว +5

    How is that door open. Mines pulls out apart. The water tray front door has magnets on but it comes all off and urs is open like a fride door

  • @knightsurda

    Longshot replying to a 5 year old video but if I flip the switch for cold water it never stop blinking, it will freeze momentarily and then start blinking again. The hot water works fine. The metal backplate where the water dispenses is Ice Cold. Its been like this since I bought it last year. Is there something I need to tinker with on the inside to get it to work? It doesn't entirely bother me but it would be nice to not have to get ice cubes for when I want ice cold water. Thanks for any response.

  • @justdissin7340
    @justdissin7340 4 ปีที่แล้ว

    I regret buying this thing,doesnt seal right on top of the bottle & water doesnt taste the same

  • @AnnieFarmerFarm
    @AnnieFarmerFarm 6 ปีที่แล้ว +1

    Why don't they make thing to last I hate Plastic stuff! At least you know how to fix it I would just have water in the floor!

  • @christamorales9462
    @christamorales9462 3 ปีที่แล้ว

    Do you have any alternatives to this dispenser? I wanted to purchase it from Home Depot but no longer see it on their website

  • @DMAPDX
    @DMAPDX 9 ชั่วโมงที่ผ่านมา +1

    Enjoyed your video.

  • @CornFed86
    @CornFed86 6 ปีที่แล้ว +2

    Awesome, nice work Sir! 👍🏼

  • @goosehunter4845
    @goosehunter4845 6 ปีที่แล้ว +1

    good job Darren, thats a handy machine don't need a kettle with that thing haha,.. nice video have a good night take care,

  • @foxxxy51
    @foxxxy51 6 ปีที่แล้ว +1

    Looks like it’s time to drink tap water lol lol Awesome video man! 👍👍👍👍

  • @led8541
    @led8541 6 ปีที่แล้ว +1

    great video

  • @PartTimeDetector
    @PartTimeDetector 6 ปีที่แล้ว +1

    Nice job!

  • @79dogface
    @79dogface 3 ปีที่แล้ว +1

    Does yours make a crap ton of noise no matter what it’s doing ? Mine does and I can’t stand it.

  • @photocontrol
    @photocontrol 6 ปีที่แล้ว +1

    A nice easy fix, watch out for the sharp edges! Looks like a decent water dispenser.

  • @mohammadali3711
    @mohammadali3711 ปีที่แล้ว

    Hi the bottom left light keeps flashing and water won’t come out?

  • @WaynJul
    @WaynJul 6 ปีที่แล้ว +1

    Great DIY repair. Save some money.