Thank you, thank you!!!! My water dispenser had not dispensed water for a week but after checking the connection like you suggested, it worked!!!!! I am beyond excited.
I can’t believe we had this unit unplugged for a year. I resolved to take it to the dump a few weeks ago but as a last ditch effort I googled to find a repairman. Thid video came up and I recognized the unit on the picture. What do you know? This was the solution! ❤️ Thank you!!!
I checked to be sure the hose was not loose on either end. I unplugged it, and waited for a few minutes to see if it would reset. When I plugged it back in, I heard the motor start up. I gave it an hour for the hot water to get hot and see if the hot water would pump, but it didn't, the normal water did pump. Yesterday the water bottle was empty, I bought more water today. The cold hasn't pumped for about a year, I just used the hot water. After unplugging it again and waited a few minutes, I replunged it, and this time I didn't hear the motor. What do you suggest?
Check the back of your dispenser and turn it on both hot and cold switches. All water dispensers are just have one supply pump just make it sure that all the tubing are properly hooked up and your water cabinet door are securely closed. I hope this helps.
I have the Costco Hamilton Beach bottom load and I have the same problem. After opening the top cover, I see the valve ear has been cracked so when I push the dispense button, it open the valve slightly. That is why my hot water starts to slowly decrease over a day or two. A viable fix is to swap the valve that I don't use. I also have an Avalon dispenser where the water on the hot side start to drip. On that one the valve wear down because of the hot water eat way the valve lip. It gets corroded\ pitted that is why it can an seal. I am looking for a more reliable dispenser.
Check it out all the tubing. Just push it a little. The motor doesn’t pump if there’s one tube is loose. And for the hot and cold, check at the back of your dispenser, turn on both hot and cold switches.
Hii bro!!! My room temperature button does not expels room temperature water 😢, it expels cold water like cold button. (Mine is brand new.) That happened to you? Maybe mine is wrong? Or maybe a factory defect??
I'm having the same issue. We don't use a bottle, we have a filter. After using it, it blinks orange and doesnt get cold. I have to unplug it for a while and back in to get it to reset.
True… but honestly modern videos have really spoiled us. I think we don’t have the patience anymore to listen to a real person talking. There’s awkward breaks, we need to inhale.. etc. this is how a normal person speaks and we just don’t listen as good as we used to before technology took over.
Thank you, thank you!!!! My water dispenser had not dispensed water for a week but after checking the connection like you suggested, it worked!!!!! I am beyond excited.
Glad to hear that 👍
Glad to hear that 👍
Thank you!! I had the empty bottle flashing light I just pushed the line in and it’s fixed. Thank you again.
Glad to hear that 👍
Thanks a lot... my water dispenser is been out for more than 2 weeks or so I thought... until I saw your video many thanks
My pleasure 👍
I was about to call the technician but when I came across your video it helped me to fix my dispenser. Thanks for your information
Glad to hear that 👍
Thank your shearing. My dispenser didn't suck these days. After watch your video, I push tubes tightly to the joint, and it works. 👍👍👍
I’m glad. Thanks for watching
Thank you! Easy fix and now I know for the future!!!
Glad to hear that 👍
Appreciate it! Just changed the water for the first time and this 100% fixed it
My pleasure 👍
Thanks so much! I thought I would need to buy a new one. So happy right now. Love my water cooler.
Glad to hear, and thanks for watching
Omg we were about to call technician because our water dispenser stopped working only to know that the hose got loosen up. Thank you!
Glad to hear that 👍
Igloo IWCBL353CRHBKS I just bought my dispenser and the water doesn't rise up, why could that be?
@@torontodiy I just bought my dispenser and the water doesn't rise up, why could that be? Igloo IWCBL353CRHBKS please help
I can’t believe we had this unit unplugged for a year. I resolved to take it to the dump a few weeks ago but as a last ditch effort I googled to find a repairman. Thid video came up and I recognized the unit on the picture. What do you know? This was the solution! ❤️ Thank you!!!
Glad to hear that 👍
Any other reason the light would be flashing? I’ve made sure my lines are secure and they are. Empty bottle light still on sadly.
Hey thank you so much, after I watched your video I fixed mine after a few weeks.
Thanks again
Thank you! This helped so much, I thought I had to buy a new one!🙌
My pleasure to help
Thank you! You saved me over $300!!
Thanks so much. Worked like a charm!
Glad it helped!
thank you sir this was very helpful
Glad to hear that 👍
Thank you! I was so frustrated, and this did the trick.
Thanks for watching👍 pls consider to subscribe🙏
I checked to be sure the hose was not loose on either end. I unplugged it, and waited for a few minutes to see if it would reset. When I plugged it back in, I heard the motor start up. I gave it an hour for the hot water to get hot and see if the hot water would pump, but it didn't, the normal water did pump. Yesterday the water bottle was empty, I bought more water today. The cold hasn't pumped for about a year, I just used the hot water. After unplugging it again and waited a few minutes, I replunged it, and this time I didn't hear the motor. What do you suggest?
Check the back of your dispenser and turn it on both hot and cold switches. All water dispensers are just have one supply pump just make it sure that all the tubing are properly hooked up and your water cabinet door are securely closed. I hope this helps.
I have the Costco Hamilton Beach bottom load and I have the same problem. After opening the top cover, I see the valve ear has been cracked so when I push the dispense button, it open the valve slightly. That is why my hot water starts to slowly decrease over a day or two. A viable fix is to swap the valve that I don't use. I also have an Avalon dispenser where the water on the hot side start to drip. On that one the valve wear down because of the hot water eat way the valve lip. It gets corroded\ pitted that is why it can an seal. I am looking for a more reliable dispenser.
Primo must be good option
Check it out all the tubing. Just push it a little. The motor doesn’t pump if there’s one tube is loose. And for the hot and cold, check at the back of your dispenser, turn on both hot and cold switches.
I turn both switches on but the cold water still doesnt dispense, what else do you suggest
I have the same issue.
Thank you very much sir, I fix the problem, have a great day always…
Happy to help
Thank you for your video it did fixed my problem 🙏🏼🙏🏼
My pleasure
THANK YOU! Fixed my problem!
Thank you! I couldn’t figure out until I searched how to fix this! ❤
Glad to hear that👍
Thank you sir! Very helpful
Glad to hear that 👍
how about if the cold indicator light is on
When it is on, it is generating cold water in to the cold water tank. Every time you dispense cold water, the cold indicator light should turn on.
Hii bro!!!
My room temperature button does not expels room temperature water 😢, it expels cold water like cold button.
(Mine is brand new.)
That happened to you?
Maybe mine is wrong?
Or maybe a factory defect??
Hi pal.
We are thinking to buy this brand, thanks for sharing.
Is it a good option, long lasting?
Thanks for watching and consider to subscribe to watch my other videos
Thank you! This helped me!
Glad to hear that 😀
The cold water icon keeps flashing and does not dispense cold water anymore could this be a filter issue? Or what could this be?
2:20
I just did tht and the light still blinking it’s frustrating and my water is not even cold
At the back of the unit turn on both cold and hot, and the water supply switch in to two
I'm having the same issue. We don't use a bottle, we have a filter. After using it, it blinks orange and doesnt get cold. I have to unplug it for a while and back in to get it to reset.
I’m having that problem. The cold water light is blinking red and the water is not cold. I tried unplugging it for awhile couple times but no change,
Thank you very much.
My pleasure 👍
I use the glass bottles and I have the one where the hose is hidden looks like i would have to disassemble a lot of stuff
Thank you for sharing... ❤️
My pleasure 👍
It worked 💪
Flad to hear that😀
Mine doesn't cool the water does anyone have this probpem?
Worked 🎉
Where’s the video?
Thanks really help-full
Thank you, pls consider to subscribe 👍
My hot water side isn’t working please help
You can check the back panel of your dispenser, there is switches for cold and hot, it might be rhe hot is off
True… but honestly modern videos have really spoiled us. I think we don’t have the patience anymore to listen to a real person talking. There’s awkward breaks, we need to inhale.. etc. this is how a normal person speaks and we just don’t listen as good as we used to before technology took over.
Thank you!
My pleasure 👍
My is brand new and I tried that it doesn’t work
Check the back panel and turn on the switches
@@torontodiy I only see one switch in the back the I/O
Then turn that on
@@torontodiy it’s on I
This did not work for me.
Your water supply should be turned on to bottle if your using the bottle
Editing would save this video
My apologies, I don’t really know how to edit videos. Just wanted to share whatever I could. It maybe helpful to someone. Thanks for watching anyway.
My cold side is not pumping out cold water or as fast anymore? But got side is. What’s my issue?
Check the back panel there’s a switch for hot and cold line you should turn on both.
Holly f long winded cont