Just leaving some Love everyone. Love the content and has helped me through many rough and tough times working with these engines in various situations and scenarios for many types of customers.💕❤😍✌💓
You should never rotate the camshafts or crank shaft independently while the head is mounted to the block but the timing chain is not installed. What will happen when the valves of a cylinder open with the piston at top dead center while you force cam or crank to complete the rotation.
Hello. Your videos are great. My corolla 2010 with the 1ZZFE exhaust smokes while the pcv hose is connected to the PCV valve. Disconnected and blocked the hose and now no smoke. Engine also consumes a lot of oil. This is a used car, don’t know how the previous owner maintained it. Pleas help.
Very informative video. Thank you for the video. Engine of my car is 1ZZ-FE (engine displacement 1794). It's an used car. Fuel consumption is very high. Total millage around 91,000 KM. We use duel fuel [Gasoline + Compressed Natural Gas (CNG)]. Most of the time it's run by CNG. Can you please suggest me what can I do to solve the overconsumption of fuel?
@@MayoCarsDR Thank you for your feedback. Actually, I did not check it. As I'm a new user & do not have sound knowledge about engine, can you please suggest me which issue I should check to solve the higher fuel consumption?
Hello experts, My mechanic changed my top cylinder on my car toyota corolla 09 model due to a sound at the top cylinder. Note: that was the only issue my car had before I took it to him. Unfortunately, after the completion, I went to pick it up and in a 5 minutes drive away from the workshop, the car started misfiring and overheating. Eventually, the car couldn't start anymore and the mechanic went ahead and ringed my engine that there's low compression. I told him he spoilt my engine because it was in a good condition before I took it to him apart from the sound at the top cylinder. Please, what do you think caused that? He changed the top gasket as well. Your expert feedback is appreciated. Thanks.
@@MayoCarsDR Hi good friend I have a 2014 Toyota Yaris 1.5 engine and I have 225 Lbs of compression evenly on all cylinders, and very dry, car runs great, just wanted to know if compression is normal or is there something wrong with the engine?
One thing confuses me about this engine, why didn't they use bearings for the camshafts? I wanna install a more aggressive cam for my intake and exhaust but im not sure if I should due to the surface they rest on might be worn to shit.
Expensive, In my country Time chain kit $240 + VVTi rachet $380 + Engine gaskets full kit $280 + Oil pump $120 + Oil and filter 5lts $60 + microfilter $10 + waterpump $80 + handjob $700, all toyota original parts
اين انت من زمان.. قمت بتوضيب المحرك واجهتني مشكلة توقيت الجنزير بحثت في الانترنت ولم اجد من يشرح لي بالتفصيل الممل طريقة وزن التايمن وبعدها سحبت السياره الى ورشة😢 الاصلاح 😢
Just leaving some Love everyone. Love the content and has helped me through many rough and tough times working with these engines in various situations and scenarios for many types of customers.💕❤😍✌💓
Thanks for comment
Me suscribo, presente cordial saludo desde Navojoa Sonora México
Thanks for comment mexico
What type of oil rings did you use for replacement in the engine block
Good work👍
Thanks for comment
Thank you very much for the great video ,,,,
Your welcome
You should never rotate the camshafts or crank shaft independently while the head is mounted to the block but the timing chain is not installed. What will happen when the valves of a cylinder open with the piston at top dead center while you force cam or crank to complete the rotation.
Thanks for comment,
Yes I know, I didn't put the piston on the top dead center position
@@MayoCarsDR Okay that is nice. Thanks for replying.
So do you rotate the camshaft to the correct position before installing the head?
Nice job
Thanks for comment
Nice video - thanks for posting this!
You welcome
Hello. Your videos are great. My corolla 2010 with the 1ZZFE exhaust smokes while the pcv hose is connected to the PCV valve. Disconnected and blocked the hose and now no smoke. Engine also consumes a lot of oil. This is a used car, don’t know how the previous owner maintained it. Pleas help.
Depending on how many kilometers your car has driven, the engine may need overhauling.
Wow good work
Thanks for comment
Bro in modern engines like 1zz no need to measure the clearance btn the valve cap bcoz it adjust itself
1zz engine want adjustment valve clearance
But 1zr ,2ZR,3zr engine automatic adjust valves clearance Hydraulic system
Very good
Thanks for comment
do you have repair manual or video on toyota 1 GD engine and how to avail on it? thank you sir!!
No
It look very nice
Thanks for comment
No unlocking of the cam gear required?
No
Nice ❤❤❤
Thanks for comment
Cool
Thanks for comment
Nic video sir 🙂
Thanks for comment
Very very god
Thanks
Very informative video. Thank you for the video.
Engine of my car is 1ZZ-FE (engine displacement 1794). It's an used car. Fuel consumption is very high. Total millage around 91,000 KM. We use duel fuel [Gasoline + Compressed Natural Gas (CNG)]. Most of the time it's run by CNG.
Can you please suggest me what can I do to solve the overconsumption of fuel?
Are your car's oxygen sensors OK?
@@MayoCarsDR Thank you for your feedback.
Actually, I did not check it. As I'm a new user & do not have sound knowledge about engine, can you please suggest me which issue I should check to solve the higher fuel consumption?
What kinda oil do you use on inside orange spray bottle to lubricate the camshaft man?
Yes, engine oil
🎉🎉
มันอยู่กะรถรุ่นไหนครับ
Toyota Corolla 2002-2008
Hello experts,
My mechanic changed my top cylinder on my car toyota corolla 09 model due to a sound at the top cylinder.
Note: that was the only issue my car had before I took it to him.
Unfortunately, after the completion, I went to pick it up and in a 5 minutes drive away from the workshop, the car started misfiring and overheating. Eventually, the car couldn't start anymore and the mechanic went ahead and ringed my engine that there's low compression.
I told him he spoilt my engine because it was in a good condition before I took it to him apart from the sound at the top cylinder.
Please, what do you think caused that?
He changed the top gasket as well.
Your expert feedback is appreciated.
Thanks.
In such a case I can't tell you anything without seeing it, if the engine compression is low, then the engine will have to be opened
@@MayoCarsDR Hi good friend I have a 2014 Toyota Yaris 1.5 engine and I have 225 Lbs of compression evenly on all cylinders, and very dry, car runs great, just wanted to know if compression is normal or is there something wrong with the engine?
Where are piston when u turn those cams like that
All are in half of the piston bore not in top position
One thing confuses me about this engine, why didn't they use bearings for the camshafts? I wanna install a more aggressive cam for my intake and exhaust but im not sure if I should due to the surface they rest on might be worn to shit.
How much did it cost for this type of overhaul?
Expensive, In my country Time chain kit $240 + VVTi rachet $380 + Engine gaskets full kit $280 + Oil pump $120 + Oil and filter 5lts $60 + microfilter $10 + waterpump $80 + handjob $700, all toyota original parts
اين انت من زمان.. قمت بتوضيب المحرك واجهتني مشكلة توقيت الجنزير بحثت في الانترنت ولم اجد من يشرح لي بالتفصيل الممل طريقة وزن التايمن وبعدها سحبت السياره الى ورشة😢 الاصلاح 😢
الحمد لله ( و ما توفيقي إلا بالله) و شكراا ع المتابعة
👍👍
Sir address kidar ka hai??
Plzz tell me
Kon c workshop ha?
I am located in Libya
Bonjour
Good morning
Ici au Cameroun nous on souffre
IN DE 0.15MM A 0.25MM
EX 0.25 A 0.35 MM
asi sale en el manual de toyota no se por que usan 0.25 y 0.30mm
What's the liquid in the plastic blue container?
Gasoline
1mz
On n'a pas tout le matériel
Good work
Thanks for comment