Your video isn’t just a simple content but a pleasure and satisfaction. I really loved watching it, well in fact, there was never a time my attention was out of it. Keep making this kind of contents, It is worthy of a million likes! Fully watched!
Glad I could help i some way my friend so cool to hear u have the same case also i hope u enjoyed it thanks for watching, please stay in touch and Take Care my friend!
thank you for this tutorial on how to swap your hp omen to corsair 4000d airflow friend oh that's nice it turn out good galing mo talaga friend thank you for sharing
Wow! That's just some tutorial.. lots of technical things here. Looks great for a finished product though.. no, I take it back. That looks awesome! :-)
Wow ganda naman ng case mo bro ,galingmo magset up bro dami mong alam sa buhay ikaw na talaga 3 fan mo galing naman , thanks for sharing this with us new friend is here ,please always keep safe God bless...
I didnt plug the USB-C on the motherboard from the case, which is my motherboard had a build USB-C on the back, so the USB-C on the front doesnt work im just using the USB-C on the back, hope this will explain well, thank you
굿 애프터눈, 사랑하는 내 친구, 너무 오랜만 이군요. 잘 지내시지요? 이번에는 컴퓨터 본체를 직접 조립하는 군요. 이것은 굉장이 어려운 작업입니다. 조립하는 동안 신기하게 시청합니다. thank you. Dear my friend😍🌹👍Have a happy week.🤗 😍👍10
how did you get the rgb hooked up?? thats onw video ive been looking for i didnt think that there was a rgb header on the hp mobo, how do you make this work?
i though i put when i do a cable management, maybe i skip it because the video is gonna be really long,,sorry mate, but cable management is a bit easy just put all the cable in one side.
Do I need a specific size case before swapping or will any case work? I love the design on the Omen case but I want something lighter, to suit my room.
Yes mate i can control the fan, they connected to corsiar fun hub and then the hub is connected to motherboard into the pwm usb, and i can control the fan and the rgb thru corsair driver wich is they called iCUE
Think this would also work with the 30L I have just picked up a 30L with 10900K and a 3080 and the temps are stupid high. This case is on sale near me and I will pick up but want to check if you think the swap would go similar. Thanks!
In your motherboard there a usb 4 pin connector so you can plug in in there, there is one near in audio front panel, there a 2nd on the top right corner of your motherboard, and 3rd there one on the bottom right corner of your motherboard, thank you mate for your question, keep safe,
@@KahimoandRachel Hmm I think you have a slightly different board than I do. The only place that I think I can plug it in on my board is where the light bar is plugged into. Thanks for the reply though!
Thank u for watching my friend i am happy u enjoyed my content and it's so cool to hear your views on this one so cool thanks for sharing, please stay in touch and Take Care my friend!
Hey I did the exact thing you did but there’s something Im questioning, what’s the chip on the bottom right on the motherboard that was connected by to small wires, is that important by any chance?
I just bought a brand new omen HP OMEN 25L Desktop GT11-1022no and i haven't start to play with it yet, only startup. How do i not get it overheated, can i play with the Case open, or sould i have it closed, can it handle it? Btw I have plans to do exactly the same thing as you i the nere future.
thank you for the question mate, your omen 25L is design for gaming and its not overheating even thou its onle 1 fan at the back it wont over heat, the reason why i put load of rgb fan to look nice,, but you can do that own your own,
hello, thank you for your question, yeah you can use any kind of corsair case as long as fit to your motherboard, before you buy a case you have to look your motherboard first what flat form your motherboard before you but a case. keep safe,
@Kahimo & Rachel Thanks for the response! I have another question for you. Which USB connection on the motherboard did you use to connect the USB cable from the Corsair lighting hub?
If u have another social media channel u can give me my friend i will happy send u a short video showing this let me know? please stay in touch and Take Care my friend!
Hey how did you get the corsair rgb controller to work in icue? I put my omen 30l into a fractal case and can't get the lighting node core to show on corsair icue
i just download the corsair icue and automatic come out in icue the rgb hub, and you can costumise your rgn light in icue. try to delete the icue and re download again might work to you, thank you for your question mate,
@@KahimoandRachel yeah I tried that and for some reason icue won't read the controller through the 9 pin connector where the other rgb controller eas plugged in. Must be a mobo compatibility issue or something
Your video isn’t just a simple content but a pleasure and satisfaction. I really loved watching it, well in fact, there was never a time my attention was out of it. Keep making this kind of contents, It is worthy of a million likes! Fully watched!
doing this case swap right now, same exact case was available on sale nearby. glad i got a kuya helpin me out with my case swap 🙌🏽
Glad I could help i some way my friend so cool to hear u have the same case also i hope u enjoyed it thanks for watching, please stay in touch and Take Care my friend!
This was the exact case I was going to switch to. Thank you 🙌
Glad u liked it my friend we really appreciate u watching and showing us your support so kind, please stay in touch and Take Care my friend!
I have the exact same omen (i5-10400 & 1660 super) and just bought a 4000d case so thank you for this video.
U r welcome my friend i am happy u liked it and took the time to watch so kind, please stay in touch and Take Care my friend!
Nice topic Hp omen 25l base swap to corsair 🇧🇳❤️
Kahimo, thank you so much for the nice tutorial! Love your style and how informative you are
Thank you so much! and for the support
Very informative, thanks for the step by step tutorial of HP OMEN Case Swap!
Thanks. Almost went with this case but instead went with the H510 flow.
Glad u found something u liked my friend and thanks for stopping by and watching so kind, please stay in touch my friend!
Kahimo ikaw na Ang king of all unboxing bawat punta ko here always unboxing yahooo hope all have like that hehehe
You should make a tutorial on how to add all the fans. A lot of people would appreciate it!
i will defiantly think about doing this my friend thanks for the idea and also for watching so kind, going to u now please stay in touch my friend!
Wow very clever. Nice sharing again we learned something about this tutorial. God bless.
kahit di ka PC tech Bro! you nailed it!
Hello new friend, very good video sharing thank you.
thank you for this tutorial on how to swap your hp omen to corsair 4000d airflow friend oh that's nice it turn out good galing mo talaga friend thank you for sharing
Wow I didn’t know it was that easy thank you so much !!!
You’re welcome my friend i am happy u stopped by and enjoyed it so kind, please stay in touch my friend!
Wow! That's just some tutorial.. lots of technical things here. Looks great for a finished product though.. no, I take it back. That looks awesome! :-)
The RGB on this case looks incredible.
Yes mate they pretty cool, cheers
Nice one!
Have a great day!
this is awesome host another great unboxing here love those lights too host thanks for showing us one forty-seven here tc and thank you
Doing the same change but non rbg all black 👌🏽
cool, enjoy your pc mate,
very nice set-up for your HP OMEN. looks nice.
Thanks for the tutorial my friend. Good sharing. Hope you have a nice day and success.
Liked your video, but it wasn't step by step with replacing cables and lighting module.
thank you mate, because the video gonna be long, thank you anyway
awesome this review
Wow ganda naman ng case mo bro ,galingmo magset up bro dami mong alam sa buhay ikaw na talaga 3 fan mo galing naman , thanks for sharing this with us new friend is here ,please always keep safe God bless...
What did you do about the USB 3.1 C front plug since the motherboard doesn't have a header to plug it into?
I didnt plug the USB-C on the motherboard from the case, which is my motherboard had a build USB-C on the back, so the USB-C on the front doesnt work im just using the USB-C on the back, hope this will explain well, thank you
Hi Kbyan thanks for the Tutorial
Bug thumbs up for you
굿 애프터눈, 사랑하는 내 친구, 너무 오랜만 이군요. 잘 지내시지요? 이번에는 컴퓨터 본체를 직접 조립하는 군요. 이것은 굉장이 어려운 작업입니다. 조립하는 동안 신기하게 시청합니다. thank you. Dear my friend😍🌹👍Have a happy week.🤗 😍👍10
Galing mo mag disassemble bro ..gandang case!
Thanks for the video this is very helpful I'm subscribing
Thank u so much for your support my friend u r so kind, please stay in touch and Take Care my friend!
Thank u so much for your support my friend u r so kind, please stay in touch and Take Care my friend!
Hey, do you think that the RGB on the fans will work if i use a Razer Chroma rgb hub instead of the Corsair one?
sorry mate im not sure, cuz all my stuff is corsair that why i use corsair hub
@@KahimoandRachel don't worry it worked, i just used other rgb fans
Love this tutorial! Hey, where did you put the plate (the one with a lot of ports) from the old case on the new case?
I didnt put in the new case mate, i just put in my tAble not using anymore
@@KahimoandRachel and that didn't have a negative impact? I have been debating whether I should do the same.
thanks for this ! very informative
Happy u liked it my friend u r so kind for watching we appreciate your support, please stay in touch and Take Care my friend!
nice work, good job
Thanks sa pag share ng video mo kuya
very nice naman po nyan galing galing
how did you get the rgb hooked up?? thats onw video ive been looking for i didnt think that there was a rgb header on the hp mobo, how do you make this work?
all rgb fan is connected to corsair rgb hub, then the rgb hub is connected to the back of my case to the usb at the back.
Very nice beautiful sharing dear friend 👍♥️🌺🌹🎁✅🔔👈🙏🙏 Stay connected dear
Thank u so much my friend i am glad u enjoyed it, going to u now please stay in touch my friend!
Bro can u please show how u connected your case power button cable ? Pls
the power button is connected to the motherboard and there is a name of your motherboard for reset button and power button aswell
Hello mate thank you for your question.
Kahimo, nice tutorial video,
Why didn’t u show the cable connection to the mother board? I need help with that
i though i put when i do a cable management, maybe i skip it because the video is gonna be really long,,sorry mate, but cable management is a bit easy just put all the cable in one side.
Do I need a specific size case before swapping or will any case work? I love the design on the Omen case but I want something lighter, to suit my room.
yes you need a specific case because every motherboard got a different size, check your specs first before you swapping the case.
Are you able to control the fans as i think they are plugged into sata and not motherboard
Yes mate i can control the fan, they connected to corsiar fun hub and then the hub is connected to motherboard into the pwm usb, and i can control the fan and the rgb thru corsair driver wich is they called iCUE
@@KahimoandRachel OK thanks
where did you plug the corsair rgb controller into? instructions say plug into USB 2.0 header but i cannot find it!
i plug my corsair rgb control to my motherboard usb header
What size on the psu broder? I’m buying the 5000d it’s says atx PS2 is it same size as the one we got in the omen pc?
The 5000d is on sale 90$
thank you mAte for your question, my psu is 500w
@@KahimoandRachel aight thanks for the fast reply!✅
Do you think the cables are long enough in the 5000d ?
Good Job 👍 I want to swap my 30L. What case would ?
Can you do another video of how you connected RGB please? I see alot of people asking about that.
If you watch my other video mate wwhen i install my corsair rgb fan that will help you how to make rgb fan work,
Where did you plug your “Reset SW” and “Power Led+-“ ?
i plug the reset SW into the mother board near to the power and audio top right side corner of the mother board
@@KahimoandRachel Did you plug the lighting node pro via usb port on the back of your pc?
Think this would also work with the 30L I have just picked up a 30L with 10900K and a 3080 and the temps are stupid high. This case is on sale near me and I will pick up but want to check if you think the swap would go similar. Thanks!
Please mate check your motherboard if its micro atx or atx before you get the case, thank you
where did you plug in all the three fans ?
thank you mate for the question, i plug all my 3 fan in corsair hub,
Can you do a video how to plug in the wires
I will try and do that one next my friend but i have some cool unboxing coming up soon, please stay in touch and Take Care my friend!
Where did you put the 25L’s hard drive into the new case?
on the back of the case near to the power supply
how did you hook up the corsair node mine aint working on ique
i connect mine to the motherboard usb hub
@@KahimoandRachel what is the usb header/hub labeled??
The small one for RGB CONTROL
First here thanks for sharing
I have a omen 25l desktop. How do I find if my motherboard is itx as well?
you can look in your manual or try to find the spec of your motherboard on the net.
Where did you plug your corsair fan controller into the motherboard? I’m trying to figure that out for my case swap
In your motherboard there a usb 4 pin connector so you can plug in in there, there is one near in audio front panel, there a 2nd on the top right corner of your motherboard, and 3rd there one on the bottom right corner of your motherboard, thank you mate for your question, keep safe,
@@KahimoandRachel Hmm I think you have a slightly different board than I do. The only place that I think I can plug it in on my board is where the light bar is plugged into. Thanks for the reply though!
Have the hp omen obelisk, also don't have those connections. Find a way around it?
where did you connect the rgb hub? i am having problems
hello mate thank you your question, i connect my rgb hub to motherboard header and sata connector to get the power, hope that will help you.
@@KahimoandRachel thank you for your help. saved my day.
I'm doing the same, but with a white 4000d airflow, and no rgb fans. Looks aren't a priority for me yet though.
Thank u for watching my friend i am happy u enjoyed my content and it's so cool to hear your views on this one so cool thanks for sharing, please stay in touch and Take Care my friend!
Hey I did the exact thing you did but there’s something Im questioning, what’s the chip on the bottom right on the motherboard that was connected by to small wires, is that important by any chance?
I found out it was the wifi but I have no cue where to attach the metals at
yes mate that is a wifi, you right, thank you
do you know where to put the metals?
@@illipinoo8768 I jus put them on the back panel sticking in the side
hi man, where did you find the usb for the corsair rgb hub? i have the same motherboard but i cannot find the 9 pin for the usb
Youll need to use a usb adapter for that sadly
I just bought a brand new omen HP OMEN 25L Desktop GT11-1022no and i haven't start to play with it yet, only startup. How do i not get it overheated, can i play with the Case open, or sould i have it closed, can it handle it? Btw I have plans to do exactly the same thing as you i the nere future.
thank you for the question mate, your omen 25L is design for gaming and its not overheating even thou its onle 1 fan at the back it wont over heat, the reason why i put load of rgb fan to look nice,, but you can do that own your own,
@@KahimoandRachel thanks for the reply mate :)
Did you use the same screws from the omens mother board because for us it would pop out
Thank you for dropping here, i use the screw that come with the case
@@KahimoandRachel thanks another question
Where did you connect the fan to the motherboard ?
Can I use the Corsair Icue 220t case?
hello, thank you for your question, yeah you can use any kind of corsair case as long as fit to your motherboard, before you buy a case you have to look your motherboard first what flat form your motherboard before you but a case. keep safe,
Whats all the things that you had to buy for the upgrade to work?
ive just got up grade the case so i can put all RGB light on it.
Where did you hook the two SATA cables on the fan hub and node?
on the power supply mate, my power supply had a more sata output, thank you for your question, keep safe
@Kahimo & Rachel Thanks for the response! I have another question for you. Which USB connection on the motherboard did you use to connect the USB cable from the Corsair lighting hub?
did you figure this out?? My icue software womt detect the hub
please show the wiring back to the motherboard, please man
If u have another social media channel u can give me my friend i will happy send u a short video showing this let me know? please stay in touch and Take Care my friend!
How did you get RGB fans to work? I just swapped my 30L to a 4000D case but cant get RGB to work. I have the same fans and RGB hub and LED node.
I connect my rgb fan on the usb 4 pin from my mother board, all motherboard had a usb 4 pin connector for the rgb light and rgb fan,
Will the 30ml omen version of this pc fit into this case
thank you for your question mate, yeah 30ml is fit in this case they both same motherboard size. happy holiday to you..
@@KahimoandRachel thanks bruv
Hey how did you get the corsair rgb controller to work in icue? I put my omen 30l into a fractal case and can't get the lighting node core to show on corsair icue
i just download the corsair icue and automatic come out in icue the rgb hub, and you can costumise your rgn light in icue. try to delete the icue and re download again might work to you, thank you for your question mate,
@@KahimoandRachel yeah I tried that and for some reason icue won't read the controller through the 9 pin connector where the other rgb controller eas plugged in. Must be a mobo compatibility issue or something
4:56 Graphics card
what is your question about the graphics card bro?
question
yes mate what is your question please