Hey, if I turn the output knob all the way down, but turn the headphone knob up, will I still hear a sound in my headphones? Cause when I record my vocals, I don't want monitor speakers to be on.
I have the DT 770 pro 250 ohms. Theyaudio is plenty loud directly from my PC (would want it to be louder), but the bass is a bit lacking. Will something like the Scarlett Solo help with this?
I upgraded my Sennheiser headphones, sounds great, unfortunately some songs sound muck thru ur device, I need to play with the bass, maybe less or more base or treble not sure... asked th Focusrite support and the give me articules unrelated to my delema!!!I have Focusrite 2i2 Please help!!
Do you know if I should get the 770 80 ohm, or the 250ohm to monitor my rode podmic USB. I have my rode mic plugged into my m2 MacBook Pro, and plan to plug 250ohm headphones into the mic directly.
I have Scarlett Solo Gen4 + sE X1S microphone + HyperX Cloud II. My main problem is im playing CSGO / COD / OSu! sounds are feels delayed. Actually not feels, its delayed with every combination / setting and driver. Second and most serious question for me. Since years i want to make music with FL / Ableton and im creating beats, mixing musics which i like style. I can't hear clear and high quality sound with this setup. When i search for fix; peoples preferring 770 pro / 990 pro with possible maximum Ohm's. What you prefer for me? I'm bored of dirty and husky sound.
Can I connect the TV sound via Toslink SPDIF Optical cable and the PC sound via USB to the audio interface and output both to my Beyerdynamic DT 1990 Pro (250 Ohm) so that I can hear TV and PC at the same time?
I was looking to get this for a podcast. When I am mic monitoring or listening thru my headsets will I be able to hear through both ears or is there some button/setting I have to use to be able to hear it through both ?
For the scarlett solo, the direct monitoring is always stereo, you'll hear it in both ears. But if you're buying this JUST for podcasting. I would recommend you get the Vocaster One or Vocaster Two instead. I have a video coming out tomorrow showing the differences and why the Vocaster series is better for podcasting.
Hey looking for a good interface to power my dt990 250ohm would you recommend these for gaming/music ? looking to get the most out my headsets audio
i’ve heard audient interfaces can drive them pretty good. that’s what i use. the guitar preamp is kinda wonky tho, other than that it’s great
I’m not using high impedance headphones and have my headphone knob up all the way and it’s still not loud enough. Help!
I have same problem
please lmk if you find a fix
Would you please make a video on nt1-a and scarlett focusrite solo 4th gen for OBS
Hey, if I turn the output knob all the way down, but turn the headphone knob up, will I still hear a sound in my headphones? Cause when I record my vocals, I don't want monitor speakers to be on.
Yes!
I have the DT 770 pro 250 ohms. Theyaudio is plenty loud directly from my PC (would want it to be louder), but the bass is a bit lacking. Will something like the Scarlett Solo help with this?
yes
I upgraded my Sennheiser headphones, sounds great, unfortunately some songs sound muck thru ur device, I need to play with the bass, maybe less or more base or treble not sure... asked th Focusrite support and the give me articules unrelated to my delema!!!I have Focusrite 2i2 Please help!!
Do you know if I should get the 770 80 ohm, or the 250ohm to monitor my rode podmic USB. I have my rode mic plugged into my m2 MacBook Pro, and plan to plug 250ohm headphones into the mic directly.
I have Scarlett Solo Gen4 + sE X1S microphone + HyperX Cloud II. My main problem is im playing CSGO / COD / OSu! sounds are feels delayed. Actually not feels, its delayed with every combination / setting and driver.
Second and most serious question for me. Since years i want to make music with FL / Ableton and im creating beats, mixing musics which i like style. I can't hear clear and high quality sound with this setup. When i search for fix; peoples preferring 770 pro / 990 pro with possible maximum Ohm's. What you prefer for me? I'm bored of dirty and husky sound.
Can I connect the TV sound via Toslink SPDIF Optical cable and the PC sound via USB to the audio interface and output both to my Beyerdynamic DT 1990 Pro (250 Ohm) so that I can hear TV and PC at the same time?
What about the DT990 600ohm Edition?
im not an expert but i think youd need a bigger audio interface for that
Would the 3rd gen solo be sufficient or will the difference be vastly noticeable?
It’s a pretty big jump for 4th gen
I have the third gen solo and its not enough, I am looking to replace the headphones because I love the interface for guitar
did u find the headphones for the 3rd gen scarlet?@@Soggybiscuiits
do you recommend it for mixing and mastering?
How does the headphones get signal? I'm getting no signal with my 4i4 4th Gen
Should i buy Solo 4 or Audient id4 mk2?
it seemed like on my 4th generation the earphones not loud enough but on the first generation it was good
Is it possible to monitor my mic with this and route my gaming audio to my seperate dac/amp? If so how would you do this?
the the f would you need seperate dac amp if this already got it?
I was looking to get this for a podcast. When I am mic monitoring or listening thru my headsets will I be able to hear through both ears or is there some button/setting I have to use to be able to hear it through both ?
For the scarlett solo, the direct monitoring is always stereo, you'll hear it in both ears.
But if you're buying this JUST for podcasting. I would recommend you get the Vocaster One or Vocaster Two instead. I have a video coming out tomorrow showing the differences and why the Vocaster series is better for podcasting.
@@kettnercreative Thanks so much for the reply and the tip. I am looking at the Vocaster now.
can this combo (solo 4th gen + dt990 pro 250 ohm) handle max sample rate, like 192kHz?
Ward
My 990 pro are not loud on my 4th gen Scarlett solo its on max
For music listening or live monitoring?
bt 770 pro 250ohm + solo 4gen? or 80ohm will be better choise? i want them for everyday use and music produce.
Which version you bought bro
Thanks for the video! Cant it handle 300 ohm headphones like Sennheiser HD660S2?
Is this amp good enough for the dt 990 250ohms for
Gaming (fps)? Thanks
Is M-game solo loud enough for dt 990?
I only tested the M-Game solo briefly when it launched and I remember it not working well and being very hissy.
They aren’t 250ohm but my DT700 Pro X sound great with my Scarlet 2i2.
That's precisely why they do. If I remember correctly they are somewhere in the range of 30 ohm.
@@AlvaroALorite 48ohm.
will my scarlett 8i6 3rd gen power the beyerdynamic dt 990 pro?
if not, which interface should i use for both my shure sm7b and beyerdynamic dt 990 pro 250ohm setup? thanks!
The new 4th gen can do both. The Rode AI-1 is another good interface that can do both.
@@kettnercreativeok great thanks, i use the 3rd gen now with the 990 pro 250ohm and the sound doesnt seem right. Thats why i asked
7 -> 10 is rather 50% u;plift :)
Focusrite Scarlett SOLO 4th or rode AI-1 for bayerdynamic dt990 250ohm?
Rode AI-1
Can i ask which one you bought for your dt990 250ohm. Got the same headphones and not sure what interface to buy.
NOT LOUD ENOUGH DON'T BUY IT. If you %100 your pot you will atleast %40 or something and you can not hear well. I don't have any ear problems.
I second this!!! I get more power from my actual MacBook than this stupid interface!!