C1/107/Aygo - Fitting a new catalytic converter

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 พ.ย. 2024

ความคิดเห็น • 33

  • @flippingcarsrepairs
    @flippingcarsrepairs 8 หลายเดือนก่อน +2

    Just did mine no need to take the alternator of 👍

    • @DABDIY
      @DABDIY  8 หลายเดือนก่อน +1

      You can do it with the alternator in place, but it certainly makes access a lot easier with it out of the way.

  • @froll-55
    @froll-55 ปีที่แล้ว +1

    Здравствуйте. Какой пробег у машины? Какая причина замены катализатора?

  • @ColinMcDonnell-q2t
    @ColinMcDonnell-q2t หลายเดือนก่อน

    Just wanted to ask if you remapped or chipped your Citroen C1 if so is it worth doing and how much performance do you get from it thank you

    • @DABDIY
      @DABDIY  หลายเดือนก่อน

      I haven’t and I probably won’t until I’ve completed the turbo build because the gains will be marginal and not worth the money.

  • @olegfiesta7685
    @olegfiesta7685 3 หลายเดือนก่อน

    how much did you pay for the catalyst? and where did you order?❤❤❤

    • @DABDIY
      @DABDIY  3 หลายเดือนก่อน

      I don’t recall how much, it was a while ago. I bought it from a friend as a used item, I don’t have any links for you or anything like that.

  • @atoyran6584
    @atoyran6584 6 หลายเดือนก่อน +1

    Hii please help me. The interior of my c1 smells like burned oil or gas. I checked everything. There is no leak anywere whatsoever, but the smell keeps coming when i turn the vent on. What the hell is happeninggg

    • @DABDIY
      @DABDIY  6 หลายเดือนก่อน +1

      Have you checked all around the outer surface of the catalytic converter? It’s not uncommon for them to crack and leak exhaust gasses.

    • @atoyran6584
      @atoyran6584 6 หลายเดือนก่อน +1

      @@DABDIY i cant find anything. But when i ride for 15 minutes and pop the hood open. I get this strong burned fuel/oil smell. Its coming from the catalystic converter. Because the other locations near the motor dont smell so strong. Is it maybe better to buy a new catalystic ?

    • @DABDIY
      @DABDIY  6 หลายเดือนก่อน

      @atoyran6584 it might be time for a new cat, but don’t quote me on that.

    • @gabrielkjellgren7567
      @gabrielkjellgren7567 หลายเดือนก่อน +1

      @@atoyran6584i could not see it but when i took my cat off the exhaust manifold had completely rusted apart, and I also had that smell. Need to hange it probably

  • @matt_corbett
    @matt_corbett 17 วันที่ผ่านมา

    Just had a new cat fitted, car turns over but will not start, any ideas??

    • @DABDIY
      @DABDIY  17 วันที่ผ่านมา

      Could be anything! Have you disturbed any earth straps or anything like that?

    • @matt_corbett
      @matt_corbett 17 วันที่ผ่านมา

      @DABDIY I did not do the work, but will ask the question, ty for reply.. I guess it could be a sensor issue of some kind,

    • @DABDIY
      @DABDIY  17 วันที่ผ่านมา

      @matt_corbett id definitely take it back to the garage that did the work then, it’ll be under warranty.

  • @petersomthing9508
    @petersomthing9508 ปีที่แล้ว +1

    Christmas Eve had to put new exhaust on my Daughters toyota aygo for the mot she lives away and was only here for 2 days same thing happened threads went on one side of the catalytic converter so had to put just a bolt and nut on it but passed the mot, will re-thread drill and tap easy to do from under the car next time she here , needs a proper bolt with spring old one will be no good hole diameter will be bigger

    • @DABDIY
      @DABDIY  ปีที่แล้ว +1

      If you can get it to tighten up and not leak, you’re on to a winner there 👍🏻

  • @stefanspaan2223
    @stefanspaan2223 ปีที่แล้ว

    How long does it takes to change de katalysator? From begin to end?

    • @DABDIY
      @DABDIY  ปีที่แล้ว

      About an hour if all the nuts and bolts behave themselves.

    • @dutchboy831
      @dutchboy831 ปีที่แล้ว

      @@DABDIY Is it necessary to remove the bumper radiator etc? Thanks mate

    • @DABDIY
      @DABDIY  ปีที่แล้ว

      @dutchboy831 it certainly makes life easier

    • @flippingcarsrepairs
      @flippingcarsrepairs 8 หลายเดือนก่อน

      ​@dutchboy831 i would you can do it with out but its alot tighter

  • @arslaansarfraz3251
    @arslaansarfraz3251 ปีที่แล้ว

    Is there anything you can do to stop the cat getting robbed

    • @DABDIY
      @DABDIY  ปีที่แล้ว +2

      Not that I’m aware of. This car has the added advantage of the cat being behind the bumper, rather than under the car. That makes it harder to access.

  • @gavjlewis
    @gavjlewis ปีที่แล้ว +1

    Could you have not re-threaded the old cat?

    • @DABDIY
      @DABDIY  ปีที่แล้ว +3

      I probably could, but that would have involved welding, drilling & tapping or helicoiling. Honestly, it’s not worth t cause I already had a spare.

  • @harwoods11
    @harwoods11 11 หลายเดือนก่อน

    As I recall most all the nuts and bolts will be totally corroded into place and may well snap upon removal. This will mean stud /bolt removal tools, hardened drill bits and possibly the removal of many more parts to gain better access to retap threads. Not a nice job by any means.

    • @DABDIY
      @DABDIY  11 หลายเดือนก่อน

      Agreed. I’m under no illusion that I got lucky with this job.

    • @flippingcarsrepairs
      @flippingcarsrepairs 8 หลายเดือนก่อน

      Ive just done mine as my manifold on one cylinder has disintegrating bolts were gorroded but but still came out ok 👍 👌

  • @ΕλενηΓκέλη-σ2δ
    @ΕλενηΓκέλη-σ2δ ปีที่แล้ว

    Καλημέρα επίσης!Η σιωπή προς απάντηση...