Thanks for watching and following along on our journey!! Be sure to subscribe for future updates and projects on the farm with this link bit.ly/2YWNN7T
Very fine idea for the pads with minimum waste! The only fabrication tip I would offer is to run your weld bead hotter and slow down. You need more metal to fill your joints and your welds are "cold". I would easily pay $200 for those pads, once youve got the fabrication tightened up. I'm making some soon!
Glad I could help out! One change I found to make that I haven’t done yet is to drill a hole in the plate to help with suction in mud. They want to get stuck sometimes.
Great video, the stabilizers come out really nice and rugged. You might have to market those bad boys. I’m sure you are not the only one with stability issues. Liked and sub.
Thanks Ray! There are a few, what look like Chinese made, stabilizers out there now. Just not quite beefy enough for what I was wanting. They definitely give it some extra grip!
Nice outrigger pads. Too bad you couldn't mass produce them for the rest of us and make some profit. I'd pay you for them. Keep up the good work my friend.
Those are awesome! I went to the dealer a couple days ago and noticed something similar on the new Kioti backhoes. Not sure how much they are, but I bet your fabrication was cheaper.
2 questions 1. What rpm do you use for backhoe? I do realize it depends on tractor power but I'm curious 2. Do you constantly have to push down outriggers when working the backhoe?
I use mine around 2,000 or 2,500 I would say. Same power as lower RPM but it moves faster. I find that once the outriggers are down I don’t really have to adjust them much.
For less noise and more control (slower movement) while digging very rocky Maine soil I have left my tractor at 1000 to 1800 rpm and I also didn't notice a backhoe power drop, but it did lead to more DPF cycles i suspect. for the first 2 years I think i had either 1 or zero DFP cycles and I have had 2 just this summer while using the backhoe a lot. 2) if you need to adjust them down frequently you might want to look for a pressure leak(?) or you are just more observant than I am.
@rampanttricky17 someone said that the outriggers are not meant to hold up the tractor but are there to act as stabilizers. Not sure how much of that is correct.
Thanks! I realized that too when I was editing the video. Missed two. I’ll get them when I take them off to paint this spring. No school or anything, just pick up on stuff and learn as I go by doing and seeing others weld. I know enough to get the metal to stick together and that’s about it.
@@Curtis1824 Cool! I got the chance to use the tractor this weekend to clear the snow from the driveway! Took about 15 minutes, compared to an hour snow blowing or three hours shoveling! Can’t wait for Spring!
Thanks for watching and following along on our journey!! Be sure to subscribe for future updates and projects on the farm with this link bit.ly/2YWNN7T
Very fine idea for the pads with minimum waste! The only fabrication tip I would offer is to run your weld bead hotter and slow down. You need more metal to fill your joints and your welds are "cold". I would easily pay $200 for those pads, once youve got the fabrication tightened up. I'm making some soon!
For some reason, TH-cam is repurposing these older episodes…still, nice to have them pop up in my notifications!!
You’ve got true skill sets!! I really enjoyed this. Welding is my weakness!!😖😁 beautiful build and I’m gonna take a crack at this one!! Thanks!!
Thanks, Keith! It's always a fun project when the welder is involved!
Very good job I get my tractor next week and I'm going to do the exact same thing thank you for this great video
Glad I could help out! One change I found to make that I haven’t done yet is to drill a hole in the plate to help with suction in mud. They want to get stuck sometimes.
Great video, the stabilizers come out really nice and rugged. You might have to market those bad boys. I’m sure you are not the only one with stability issues. Liked and sub.
Thanks Ray! There are a few, what look like Chinese made, stabilizers out there now. Just not quite beefy enough for what I was wanting. They definitely give it some extra grip!
Nice outrigger pads. Too bad you couldn't mass produce them for the rest of us and make some profit. I'd pay you for them. Keep up the good work my friend.
Those are awesome! I went to the dealer a couple days ago and noticed something similar on the new Kioti backhoes. Not sure how much they are, but I bet your fabrication was cheaper.
Thanks! They were a fun build and have really helped with stabilization!
2 questions
1. What rpm do you use for backhoe? I do realize it depends on tractor power but I'm curious
2. Do you constantly have to push down outriggers when working the backhoe?
I use mine around 2,000 or 2,500 I would say. Same power as lower RPM but it moves faster. I find that once the outriggers are down I don’t really have to adjust them much.
For less noise and more control (slower movement) while digging very rocky Maine soil I have left my tractor at 1000 to 1800 rpm and I also didn't notice a backhoe power drop, but it did lead to more DPF cycles i suspect. for the first 2 years I think i had either 1 or zero DFP cycles and I have had 2 just this summer while using the backhoe a lot.
2) if you need to adjust them down frequently you might want to look for a pressure leak(?) or you are just more observant than I am.
@rampanttricky17 someone said that the outriggers are not meant to hold up the tractor but are there to act as stabilizers. Not sure how much of that is correct.
Where did you get your steel plate?
Surprisingly I got it at Lowes or Home Depot. I don’t remember which.
@@Curtis1824 thanks
Nice! Looks like you missed a weld on one of the center fins. Did you go to welding school to learn how to weld?
Thanks! I realized that too when I was editing the video. Missed two. I’ll get them when I take them off to paint this spring. No school or anything, just pick up on stuff and learn as I go by doing and seeing others weld. I know enough to get the metal to stick together and that’s about it.
@@Curtis1824 Cool! I got the chance to use the tractor this weekend to clear the snow from the driveway! Took about 15 minutes, compared to an hour snow blowing or three hours shoveling! Can’t wait for Spring!
@@newhampshire-bob1604 fantastic! Nice when the equipment saves you time and your back!