Thanks, Danny that’s what the vast majority of reviewers do. And that’s why there’s very few bad reviews out there for products, most reviewers don’t want to waste their time.
The honesty is what most of us are here for, very few channels on youtube can claim any integrity. People can see through the BS so keep up the good work Danny.
Some manufacturers use junk parts , charge a lot for the speakers and they measure badly. Other speaker companies have better performance and use better parts. The secret is: don't rip people off.
@@scottlowell493there is whopping unspoken assumption in your post ie better measurements = better product. Perhaps to an extent in speakers, though my taste in speakers (Open baffle, bipole, dipole) don’t rely on usual measurements alone, AND many well respected/preferred by many DACs measure worse. NB: I have BSE with minor EE and respect GR research.
looking good danny them workouts be working! also i had to kinda laugh when you said "hey manufacturers send me your gear" "so i can fix your mess lol"
I second that! That you should check out Orchard Audio Starkrimson class D GaN amps Just talk to Leo I'm sure he would accommodate you He's a one man show
@@Jack96993 . I'm pulling your leg Jack. Do we really need another GaN amp review? How about another EverSolo or Fosi amp review? If GR does that, I'm >>>>>>>>
Danny - how about kicking this off with a review of your gear you use to voice your speakers? It would be interesting to understand why you have brands X and Y even though they are the same type of amplifier (as an example). How about talking about your 'voicing opinions' - what personal AND objective value criterion do you have that might be different from other designers? What do you end up spending the most time on regarding component selection that ties in with your objectives? Off axis response seems very central to your criteria - i've never heard it given the weight you do on this channel. Do you feel this is a neglected design consideration in the industry today? What about horns? Other then the low-end Klipsch stuff that gets sent in what is your perspective on the heritage series? What about heritage series gives its buyers the 'tingles' that you might not (or do) find worthwhile? I've been following you for many years...but may have missed answers to these questions. ps: where u going participate in a track meet the day of this recording? /grin
I'll take a few of those questions.... I did do a video on my personal system several months ago: th-cam.com/video/WNOSp4kT6c4/w-d-xo.htmlsi=j4GbjtylSnp1f1nC I typically design our speakers for accuracy. The voicing that then comes into play involves driver material, and high quality components that have the right synergy with our drivers. I also spend a lot of time comparing differences that occur in the sound stage layering, separation, and depth. That means A/B comparing a lot of little things. What takes the most amount time is having proprietary thigs made. One of the most neglected things I see is a disregard for audible issues that are clearly seen in a spectral decay. Horns are typically popular for their dynamics. However, the acoustic offset of the voice coils and phase or time arrival aspects are usually very poor. Big wide baffles also tend to fight against everything else that I want from a speaker. There are ways to get those high dynamics without sacrificing everything else. So I am not a big horn fan.
@@dannyrichie9743 Thanks for your input. I'm surprised that you do custom design on the speaker components themselves. That does sound like a lot of work. I"m still learning about those spectral decay charts you always pull up.
Hopefully your AC is fixed. I enjoy your videos and would enjoy watching your recommendations for equipment to power your speakers. Keep up the great work
Brilliant idea! The GR line does in fact cover most of whats currently offered on the market today...... Minus an Altec/Klipsch style horn speaker of course.
Danny, I'm exited that I found your channel....my HIFI system (Ariel speakers, Rotel separates, Oppo DVD/CD, Elac TT) is getting some age on it and I'm thinking about some potential upgrades as well as refreshing some other vintage gear that I have that's been in storage for a while. I have a pair of Ariel 10T's that are 20 years+ old and I would like your opinion on these speakers and the potential need for updating or upgrading the drivers or crossover components...they are in almost new condition cosmetically but I'm not sure about the internals...your opinion of these would really help me in deciding what to do with them...sell or rebuild or do nothing...and I understand that that's hard to do long distance!
Id like to hear your opinion on a few Fosi amps like the za3 or v3 mono. Fosi loves all reviews good or bad. they seem to listen to the bad reviews and improve the next product from customer feedback. Im my opinion the fosi ZA3 is a great value amp.
Absolutely love this channel!! Sound, metrics and compatibility are great, but please also take into account customer service as an example do they have actual human live support? Support in the country of origin, able answer questions in a timely manner? Because I have run into 2 companies the past 30 days which cannot hold a candle to many good customer service companies.!!! Sadly these 2 companies get pumped by multiple reviewers and people like myself buy them, have an issue and get no where...it's then I understand why people always post about SVS and Emotiva with some of the best customer service. Keep up the great work Danny 🤘🏼💯🎼🔊🔥
Great idea Danny. I hope it gains traction and takes off, would love to seed you my monoprice 200x7 amp. So... when can we expect a Tekton review...😂 I did enjoy the work you did on the RF7-III, had Elon Steers assemble them. Hobbs wasn't lying, that was a multi weekend event. I understand now what you say when a woofer does not immediately stop, looking back I do hope klipsch remove that silly coating, I think that mass is their own Achilles. I did snag a pair of Caladans, frikin Amazing 🎉
Outstanding development. I'd much rather hear your advice than that of a "reviewer" who will say in a review that he's "not trying to be a NASCAR for as many brands as possible" while at the same time including a section in his review description called "SHOP OUR ROOM".
lookin buff bro! I'm looking forward to any recommendations i can get. I've only heard of super expensive (over $4000) amps to pair with my nxoticas. I need a good amp but don't know where to go. and online forums don't help much sometimes
TBH, there may be a handful of speaker companies that would not benefit from sending prototypes to Dan for consultation before mass production. And most of those companies make speakers for people not interested in sound quality. Then again, we've seen companies combining drivers that should have never made it to production, let alone matched with anything. BTW, Dan. How much would it cost for a company to send a prototype for you to test and consult? Is there a fixed $ or varies?
We actually have quite a few speaker companies send in products for our feedback, consulting, or design work. I don't charge anything for the measuring, testing, and feedback.
I love my used Copland CTA 405 integrated tube amp. It has integrated tube RIAA also. All I need in one box. I was thirsting after Luxman but that is much more expensive for the same specs.
I like this idea of a manufacturer recommending matching components, much like having active speakers, everything is matched up. Would be interesting to see Danny do an active open baffle.
To me it would be a massive red flag that a company wouldn't send you something, because you appear to use vast amounts of measurements and data to support your audio findings. They shouldn't think "who knows what he'll say" if they have a properly tested product. They should be able to be proud of measurements (with price in mind) otherwise why are you selling it, other than for profit? There are a million and one companies that care most about profits and sell audio gear. That said I appreciate your take on what info matters and how to get it out there. I don't need a whole video to know if something's bad for the price, I do however need videos about products that set benchmarks at price points, as these are the only products that actually matter to most people, so thank you!
@martinriiser5523 none of us do. That's why we are watching a diy speaker channel. If we could just drop 1.5mil on a stereo, we wouldn't be watching this at all. We'd just email one of the high-end stores and tell them to send their people out with something nice to whichever house they want it for. That said I bet more of Danny's speakers are hooked up to those amps any any other amp out there.
On another note I did hear several Perlistens several months back. Meh. It won't be long before the owners of the new SVS stuff start sending them in for upgrades. They use pretty cheesy parts.
How about a golden oldie Ken Ishiwata's greatest ever integrated amp: Marantz PM-11S2? A more modern giant killer comes from the next company Ishiwata went to - Rotel 1572 MkII.
Hey Danny, I'd love to see you review some of your own gear, the unobtainium. I'd love to hear the history, how you came to get it and how it sounds compared to products we purchase today.
I'd love for you to check out the Laiv Harmony DAC, I'm considering buying one of those. I'll send them a message as a customer to point them in this direction.
Danny you can prescreen any product and if you don't like it you don't recommend it. And I'd tell them why in hopes they can economically correct the issue or issues. Sounds great frankly.
This guy is like Holmes on Homes, "it's all done wrong, rip it all out, let's start over and give you a home (speakers) you can live with and be proud of.
Danny listen and learn from Ron's reviews and you'll be fine, because Ron has never fully exposed the weaknesses of any manufacturer's product. Everything he gets in, sounds excellent or very good?
You guys don't realize that the so called "reviewers" out there are nothing but predatory salesmen. In fact there is one out there that I think is an AI, with his invisible wife that likes audio. You are only having your imaginations fed by calculating corporate interests that are selling cheap junk parts that's worth no more than $500.00 for $50,000.00 Solomon said it and it remains true - "A fool and his money are soon departed." Danny makes speakers, he's not a sell out. Don't sell out Danny. Please. If you want to watch a master "salesman", turn to Uncle Kevvy. He can sell white gloves to a dad to give his boy to hold a cherry snow cone on a hot day at the fair.
@@barney6888 that’s why you gotta pay attention to who you listen to. The good ones always reiterate that it’s just their opinion and go listen for yourself. They’re just trying to steer you in the direction they recommend.
Maybe suggested elsewhere in the comments, but if you like the voicing of Thomas’ two amps, maybe give a listen to his speakers; designed by some one very well respected in the DIY community - Dr Viet. As for amps, I’ve got one suggestion of a name likely to be obscure to this crowd- Tom Christiansen’s Neurochrome Modulus series. I’ve been living with one his Modulus 286 for at least 5 years, and its big brother the 686 is still on my wish list of pieces just a bit over by comfort limit. In closing, hope your AC gets fixed soon - cheers.
Use a HEADLINE in comments, then add the details. Yours should have read............ "This $79 DIY Amp is better than Thomas' Galion Amps" Acid Jazz, Funk & Brass 🔈🔉🔊
after watching you review a set of speakers without the bass drivers and still yap about the terrible bass performance, i sure wouldnt send you any gear for review.
There's absolutely no reason for any manufacturer to send anything to this guy who has ZERO electronics understandings and says absolute scam artist nonsense that shows he doesn't understand even the most basic principles. What do manufacturers have to win in this transaction?
What Daniel needs to do is watch a recent Rosanne Barr video called "What's Beyond Antarctica" which features a guest who is knowledgeable about Dan's favorite topic: Wobbling Spaceball Earth. Danny loves Wobbling Spaceballs! 🌎🌎🌎🌎🌐🌐🌐🌐
@@dannyrichie9743 Measurably flat. Observationally flat. No visible 24 hour sun in antarctica during Summer as there is in the Arctic from 65 degrees N. Should be identical sun visibility from 65 S. 24 hour sun Danny. Bendy water Danny. Mindlaundered Danny
Danny on your previous video you show cased the tube amp that was nearly $4500 USD. On the back on that unit it says it was designed by Liu Zhe in Chinese, and is made in China. I don't care how good it sounds, I'm not sure any product designed and manufactured in China is good value at $4495 USD. Where does your friend come into this equation if he is neither designing or manufacturing the amp?
Waste of peoples time. You're not the end all be all when it comes to HiFi, I'm sorry to say. Your taste might not be someone else's. I do think you're pretty talented in speaker design, but ripping manufacturers speakers to make a few bucks doesn't look good. Too easy. TH-cam is already filled with questionable reviewers as it is. This will absolutely not help someone starting out.
I don't think you are very good at listening,he said if it's not something he can recommend he will just send back the item and maybe give feedback to manufacturer
If the truth hurts don't shoot the messenger. I can also tell you exactly how something sounds without having anything to do with personal preference or taste. We are also not in the business of "ripping" other companies products. We design upgrades for them as per the request of our customers.
@@dannyrichie9743 The best advice to anyone interested in HiFi is, start at the bottom and learn what you're listening too, and even learn how to listen. Most of us are discovering what sounds good? in real time, and until you experience x y or z, having someone tell you will be a waste of time. Blind faith. The only reviewer that's worth a darn is Tom Martin from the Absolute Sound. Zero fidelity tells the truth (he is trying to sell products at the same time) but does have a conscience. I purchased items on his reviews, and one of them was one of the worst purchases I've ever made. Because I didn't have enough experience to pick up on what he was telling us in his review.
@davewin1792 There is a difference between objective performance and subjective taste! Danny is an absolute expert in regards to objective truth and he is very transparent in talking about taste vs technical. So, your comment is quite ignorant!
@@LunarLightLtd1 I think Danny is more than qualified and I have a ton of respect for his knowledge, that being said, it's the end user that will be the problem? as they might not even know what is what until they discover it on their own.
The gun show
💪🏼
@@JR-ho5qm Danny also flexing his pecs.
lmao exactly what I was thinking. Good for him!
😂😂😂😂
Damn. He really does have some guns.
Danny needs a shirt that says “this is my open baffle shirt”
Let’s not forget the Commando series of sub-woofers.
Hard to get that visual image out of your heads now, right? 😂
@@fonkenfulI don’t like you for that one
lol
😝
Oh boy I would love to hear your thoughts on the Orchard Audio class D amps. There is so much hype for them.
Thanks, Danny that’s what the vast majority of reviewers do. And that’s why there’s very few bad reviews out there for products, most reviewers don’t want to waste their time.
That's why Dannial uses Ronni for all the Pay To Say "reviews."
Ronny loves EVERYTHING
Is that so?
@@Newrecordday2013 Bro do your next video wearing a gunshow shirt!
@@pizzaearthpancakesandother2549 Ha. Ha.
The honesty is what most of us are here for, very few channels on youtube can claim any integrity.
People can see through the BS so keep up the good work Danny.
I agree. Lately it’s come down to NRD and Erin. The rest are questionable.
Yes, your feedback on gear like amps and preamplifiers will be appreciated.
If I was a manufacturer, I’m not so sure I’d want Danny’s hands on it! Usually, it doesn’t end well in his critical appraisal of their product.
Just use the right non-cheesy ingredients, and it would be fine. But hey, I like ripe, sharp cheese, so everybody's different.
Oh no not tekton speakers 🤣
Some manufacturers use junk parts , charge a lot for the speakers and they measure badly. Other speaker companies have better performance and use better parts.
The secret is: don't rip people off.
@@scottlowell493 Yes. I know that. Hence, my comment.
@@scottlowell493there is whopping unspoken assumption in your post ie better measurements = better product. Perhaps to an extent in speakers, though my taste in speakers (Open baffle, bipole, dipole) don’t rely on usual measurements alone, AND many well respected/preferred by many DACs measure worse. NB: I have BSE with minor EE and respect GR research.
That is awesome! Hopefully some American Made products will make it your way, it makes a difference to us old school audiofiles.😊
looking good danny them workouts be working! also i had to kinda laugh when you said "hey manufacturers send me your gear" "so i can fix your mess lol"
I second that! That you should check out Orchard Audio Starkrimson class D GaN amps Just talk to Leo I'm sure he would accommodate you He's a one man show
Don't forget the EverSolo line of streamers too! Also the new ChiComm Starkrimson Clone is now available on ChiComm HiFi! Cheap, Cheap, Cheap!
@TriAmpHiFi Yes, all of Leo's equipment is excellent, especially for the money, and very well engineered
@@Jack96993 .
I'm pulling your leg Jack. Do we really need another GaN amp review? How about another EverSolo or Fosi amp review?
If GR does that, I'm >>>>>>>>
Danny rolling up his sleeves. lol
Danny - how about kicking this off with a review of your gear you use to voice your speakers? It would be interesting to understand why you have brands X and Y even though they are the same type of amplifier (as an example). How about talking about your 'voicing opinions' - what personal AND objective value criterion do you have that might be different from other designers? What do you end up spending the most time on regarding component selection that ties in with your objectives? Off axis response seems very central to your criteria - i've never heard it given the weight you do on this channel. Do you feel this is a neglected design consideration in the industry today? What about horns? Other then the low-end Klipsch stuff that gets sent in what is your perspective on the heritage series? What about heritage series gives its buyers the 'tingles' that you might not (or do) find worthwhile? I've been following you for many years...but may have missed answers to these questions. ps: where u going participate in a track meet the day of this recording? /grin
I'll take a few of those questions....
I did do a video on my personal system several months ago: th-cam.com/video/WNOSp4kT6c4/w-d-xo.htmlsi=j4GbjtylSnp1f1nC
I typically design our speakers for accuracy. The voicing that then comes into play involves driver material, and high quality components that have the right synergy with our drivers. I also spend a lot of time comparing differences that occur in the sound stage layering, separation, and depth. That means A/B comparing a lot of little things.
What takes the most amount time is having proprietary thigs made.
One of the most neglected things I see is a disregard for audible issues that are clearly seen in a spectral decay.
Horns are typically popular for their dynamics. However, the acoustic offset of the voice coils and phase or time arrival aspects are usually very poor. Big wide baffles also tend to fight against everything else that I want from a speaker. There are ways to get those high dynamics without sacrificing everything else. So I am not a big horn fan.
@@dannyrichie9743 Thanks for your input. I'm surprised that you do custom design on the speaker components themselves. That does sound like a lot of work. I"m still learning about those spectral decay charts you always pull up.
I’m with anyone else that said they’d love to hear your thoughts on more gear. Thanks Danny. This’ll no doubt be a popular segment.
Hope to see many recommendations coming! A good surround system would help me out.
Hopefully your AC is fixed. I enjoy your videos and would enjoy watching your recommendations for equipment to power your speakers. Keep up the great work
I can't wait! Looking forward to your thoughts on different gear.
Believe me there will be kickback if reviewed products sell
You don't know me very well. I am doing this for our customers, and not for kickbacks.
Brilliant idea, and you elucidated the parameters as only a well spoken engineer could. You have whetted a lot of appetites I am sure.
Brilliant idea! The GR line does in fact cover most of whats currently offered on the market today...... Minus an Altec/Klipsch style horn speaker of course.
Danny, I'm exited that I found your channel....my HIFI system (Ariel speakers, Rotel separates, Oppo DVD/CD, Elac TT) is getting some age on it and I'm thinking about some potential upgrades as well as refreshing some other vintage gear that I have that's been in storage for a while. I have a pair of Ariel 10T's that are 20 years+ old and I would like your opinion on these speakers and the potential need for updating or upgrading the drivers or crossover components...they are in almost new condition cosmetically but I'm not sure about the internals...your opinion of these would really help me in deciding what to do with them...sell or rebuild or do nothing...and I understand that that's hard to do long distance!
Id like to hear your opinion on a few Fosi amps like the za3 or v3 mono. Fosi loves all reviews good or bad. they seem to listen to the bad reviews and improve the next product from customer feedback. Im my opinion the fosi ZA3 is a great value amp.
☀️ out 💪🏼 out 😉👌🏽great additional service from GR👏🏼
Hope to see many recommendations coming!
Absolutely love this channel!!
Sound, metrics and compatibility are great, but please also take into account customer service as an example do they have actual human live support? Support in the country of origin, able answer questions in a timely manner? Because I have run into 2 companies the past 30 days which cannot hold a candle to many good customer service companies.!!! Sadly these 2 companies get pumped by multiple reviewers and people like myself buy them, have an issue and get no where...it's then I understand why people always post about SVS and Emotiva with some of the best customer service. Keep up the great work Danny 🤘🏼💯🎼🔊🔥
Great idea Danny. I hope it gains traction and takes off, would love to seed you my monoprice 200x7 amp.
So... when can we expect a Tekton review...😂
I did enjoy the work you did on the RF7-III, had Elon Steers assemble them. Hobbs wasn't lying, that was a multi weekend event.
I understand now what you say when a woofer does not immediately stop, looking back I do hope klipsch remove that silly coating, I think that mass is their own Achilles.
I did snag a pair of Caladans, frikin Amazing 🎉
Excellent idea, you only make a video if you like the gear and can recommend it
Outstanding development. I'd much rather hear your advice than that of a "reviewer" who will say in a review that he's "not trying to be a NASCAR for as many brands as possible" while at the same time including a section in his review description called "SHOP OUR ROOM".
I'd love to get your opinion on PS Audio's line of power conditioners.
Very very fair, thank you for sharing this project with us!!
lookin buff bro!
I'm looking forward to any recommendations i can get. I've only heard of super expensive (over $4000) amps to pair with my nxoticas. I need a good amp but don't know where to go. and online forums don't help much sometimes
TBH, there may be a handful of speaker companies that would not benefit from sending prototypes to Dan for consultation before mass production. And most of those companies make speakers for people not interested in sound quality.
Then again, we've seen companies combining drivers that should have never made it to production, let alone matched with anything.
BTW, Dan. How much would it cost for a company to send a prototype for you to test and consult? Is there a fixed $ or varies?
We actually have quite a few speaker companies send in products for our feedback, consulting, or design work. I don't charge anything for the measuring, testing, and feedback.
I love my used Copland CTA 405 integrated tube amp. It has integrated tube RIAA also. All I need in one box. I was thirsting after Luxman but that is much more expensive for the same specs.
At the end of each video Danny can recommend his speaker to match…..$$$$$$
I like this idea of a manufacturer recommending matching components, much like having active speakers, everything is matched up. Would be interesting to see Danny do an active open baffle.
To me it would be a massive red flag that a company wouldn't send you something, because you appear to use vast amounts of measurements and data to support your audio findings. They shouldn't think "who knows what he'll say" if they have a properly tested product. They should be able to be proud of measurements (with price in mind) otherwise why are you selling it, other than for profit? There are a million and one companies that care most about profits and sell audio gear.
That said I appreciate your take on what info matters and how to get it out there. I don't need a whole video to know if something's bad for the price, I do however need videos about products that set benchmarks at price points, as these are the only products that actually matter to most people, so thank you!
❤ the idea of recommended pairing for nxotica's 👍
What i want is his review of the tpa3255. Pick whichever amp.
I mean. Its not a 30k$ amp. Got it. But for the 80$ hows it stack up.
Go earn more money, you dont stack up.
@martinriiser5523 none of us do. That's why we are watching a diy speaker channel.
If we could just drop 1.5mil on a stereo, we wouldn't be watching this at all. We'd just email one of the high-end stores and tell them to send their people out with something nice to whichever house they want it for.
That said I bet more of Danny's speakers are hooked up to those amps any any other amp out there.
Watching from Sweden so you got a pretty good spread 😊
A real smorgasbord.
You got a permit for those guns?
Its registered under GRRESEARCH. LOL
I would suggest reviewing hybrid amps, like from Advance Paris and Vincent Audio, best of both world's...
Looking pretty buff there, Danny. I'm way more interested in hearing how a piece of equipment actually sounds vs how it measures (*ahem*).
Review the perlistens, jtr's, svs evolution towers,. Any popular today speakers would be fun to hear brutal honesty.
I am not a reviewer and not going to be doing any speaker reviews.
On another note I did hear several Perlistens several months back. Meh.
It won't be long before the owners of the new SVS stuff start sending them in for upgrades. They use pretty cheesy parts.
How about a golden oldie Ken Ishiwata's greatest ever integrated amp: Marantz PM-11S2? A more modern giant killer comes from the next company Ishiwata went to - Rotel 1572 MkII.
Perfect, I only care to learn about products I don’t know about that sound good… perfect 👍
Looking in good shape 💪🏻
Hey Danny, I'd love to see you review some of your own gear, the unobtainium. I'd love to hear the history, how you came to get it and how it sounds compared to products we purchase today.
th-cam.com/video/WNOSp4kT6c4/w-d-xo.htmlsi=4gzFgSoHXdgpdAcU
Entreq grounding boxes, Bybee quantum filters, Shakti stones, cables, plugs, sockets, risers, fuses and finally, sonic signature of nuclear, coal fired and renewables powered gear.
Brilliant initiative, can't wait to see and hear more.
Hope you get a Class D amp that doesn’t sound bad
I'd love for you to check out the Laiv Harmony DAC, I'm considering buying one of those. I'll send them a message as a customer to point them in this direction.
man look at thes Texas Guns been a minute since i been on the channel, you look great
Danny you can prescreen any product and if you don't like it you don't recommend it. And I'd tell them why in hopes they can economically correct the issue or issues. Sounds great frankly.
Wow… this could be the start of something great. Products that use high quality components… slim.
Bro looking JACKED
Great choice. I like your decision.
Excsellent idea!
Suns out guns out!
This guy is like Holmes on Homes, "it's all done wrong, rip it all out, let's start over and give you a home (speakers) you can live with and be proud of.
Hitting the gym! :)
I wondered why you haven't done this in the past.
the search begins .. perfect opportunity win win ! i luv it
Suns out guns out!!!!
Danny , I'm looking for warm sounding cables any recommendations ?
Maybe some of the low quality, thin ones :)
A lighter? 🤔
@@theaudiosenseinl like a zippo or a bic?
@@toby9999 so bright cables thick and expensive ?
Stock iPad cable sound cold?
Fair proposal. 👍
Keeping his arms cool
I keep seeing EMOTIVA speaker adverts. I respond " Show us your crossovers" 😄 I also told them About GR-Research!!! I'm sure they hate me now!!!
I'm sure Thomas will send his latest the Galion TS34 integrated with bumblebee caps he just announced today
Danny is JACKED!!!
The channel gets better, and better. . .
Hey Danny I doubt very much I'm the first person to say this to you but you need to get the schiit in there
I have had a few Schiit amps in already.
Any takers?
Thomas just dropped another amplifier today
Damn Danny is ripped
Damn, Danny. Looking good, sir. 😊
Brilliant!😀
Suns out, guns out!
Danny the cable guy!
"Truth !!! You can't handle the truth" 👍
Tempted to send my Manley Snappers in
Sounds like a pair of sock garters from the late 1800s.
Most experienced audiophiles
Know the greatest gear ⚙️ 😮
Affordable is whole nuhva level
Is there anyone out there that opens up, critiques and offers upgrades to GR Research products?
We do. Just about every model we offer has upgrade options.
I think you insights will be great and valuable to many. However, do you really want to jump in the "review" briar patch?
Nope, I am not going to be doing reviews.
@@dannyrichie9743 I know your observations will be valuable to those willing to pay attention. Best of luck. Going to be interesting.
Somebody send Danny a 10 KW UPS for long term analysis.
Danny listen and learn from Ron's reviews and you'll be fine, because Ron has never fully exposed the weaknesses of any manufacturer's product. Everything he gets in, sounds excellent or very good?
Ron Resnick? What's Best Forum? 😮
Not like Steve Huff of course
Oh no, shots fired.
Review presentdayproduction's active 3way studio monitors!
Interesting. Let's see who's going to be first ? 😊
This should be interesting
Can’t be no fairer than that.
You guys don't realize that the so called "reviewers" out there are nothing but predatory salesmen. In fact there is one out there that I think is an AI, with his invisible wife that likes audio. You are only having your imaginations fed by calculating corporate interests that are selling cheap junk parts that's worth no more than $500.00 for $50,000.00
Solomon said it and it remains true - "A fool and his money are soon departed."
Danny makes speakers, he's not a sell out. Don't sell out Danny. Please.
If you want to watch a master "salesman", turn to Uncle Kevvy. He can sell white gloves to a dad to give his boy to hold a cherry snow cone on a hot day at the fair.
@@barney6888 that’s why you gotta pay attention to who you listen to. The good ones always reiterate that it’s just their opinion and go listen for yourself. They’re just trying to steer you in the direction they recommend.
A massive generalisation. And we're not all fools.
Maybe suggested elsewhere in the comments, but if you like the voicing of Thomas’ two amps, maybe give a listen to his speakers; designed by some one very well respected in the DIY community - Dr Viet.
As for amps, I’ve got one suggestion of a name likely to be obscure to this crowd- Tom Christiansen’s Neurochrome Modulus series. I’ve been living with one his Modulus 286 for at least 5 years, and its big brother the 686 is still on my wish list of pieces just a bit over by comfort limit.
In closing, hope your AC gets fixed soon - cheers.
Use a HEADLINE in comments, then add the details. Yours should have read............
"This $79 DIY Amp is better than Thomas' Galion Amps"
Acid Jazz, Funk & Brass 🔈🔉🔊
Bro just wanted to make a video to show off his guns. I get it. What are the measurements on those things anyways Danny?
You must not know what a Texas summer is like . The less clothing on you is the only way to be comfortable. Are you living in Alaska?
@@jasontimothywells9895and you must not know what sarcasm is.
@@t.j.bennett6454 where I'm from sarcasm gets teeth knocked out. But my bad I happy to hear your not funny like as in hahaha . Cheers mate
@@jasontimothywells9895where I’m from stupidity gets teeth knocked out.
dear hifi manufacturers, ive realised ive missed an earnings trick so id be happy to shill your gear for a fee or free gear.
after watching you review a set of speakers without the bass drivers and still yap about the terrible bass performance, i sure wouldnt send you any gear for review.
There's absolutely no reason for any manufacturer to send anything to this guy who has ZERO electronics understandings and says absolute scam artist nonsense that shows he doesn't understand even the most basic principles.
What do manufacturers have to win in this transaction?
What Daniel needs to do is watch a recent Rosanne Barr video called "What's Beyond Antarctica" which features a guest who is knowledgeable about Dan's favorite topic:
Wobbling Spaceball Earth. Danny loves Wobbling Spaceballs! 🌎🌎🌎🌎🌐🌐🌐🌐
Still sticking with the flat earth belief huh?
@@dannyrichie9743 Measurably flat.
Observationally flat. No visible 24 hour sun in antarctica during Summer as there is in the Arctic from 65 degrees N.
Should be identical sun visibility from 65 S.
24 hour sun Danny. Bendy water Danny. Mindlaundered Danny
Who the tekton you think you are?!!! Hell No!!!
You don't want me to recommend gear that works well with our products (speakers)?
Danny on your previous video you show cased the tube amp that was nearly $4500 USD. On the back on that unit it says it was designed by Liu Zhe in Chinese, and is made in China. I don't care how good it sounds, I'm not sure any product designed and manufactured in China is good value at $4495 USD. Where does your friend come into this equation if he is neither designing or manufacturing the amp?
Waste of peoples time. You're not the end all be all when it comes to HiFi, I'm sorry to say. Your taste might not be someone else's. I do think you're pretty talented in speaker design, but ripping manufacturers speakers to make a few bucks doesn't look good. Too easy. TH-cam is already filled with questionable reviewers as it is. This will absolutely not help someone starting out.
I don't think you are very good at listening,he said if it's not something he can recommend he will just send back the item and maybe give feedback to manufacturer
If the truth hurts don't shoot the messenger. I can also tell you exactly how something sounds without having anything to do with personal preference or taste. We are also not in the business of "ripping" other companies products. We design upgrades for them as per the request of our customers.
@@dannyrichie9743 The best advice to anyone interested in HiFi is, start at the bottom and learn what you're listening too, and even learn how to listen. Most of us are discovering what sounds good? in real time, and until you experience x y or z, having someone tell you will be a waste of time. Blind faith. The only reviewer that's worth a darn is Tom Martin from the Absolute Sound. Zero fidelity tells the truth (he is trying to sell products at the same time) but does have a conscience. I purchased items on his reviews, and one of them was one of the worst purchases I've ever made. Because I didn't have enough experience to pick up on what he was telling us in his review.
@davewin1792
There is a difference between objective performance and subjective taste! Danny is an absolute expert in regards to objective truth and he is very transparent in talking about taste vs technical. So, your comment is quite ignorant!
@@LunarLightLtd1 I think Danny is more than qualified and I have a ton of respect for his knowledge, that being said, it's the end user that will be the problem? as they might not even know what is what until they discover it on their own.
Can I send you my Klipsch " The Sixes"? 😂
You watch UEFA EURO 2024? Nice games.
I recorded them all and I am still watching them.